RESUMO
The ubiquity of metal-organic frameworks in recent scientific literature underscores their highly versatile nature. MOFs have been developed for use in a wide array of applications, including: sensors, catalysis, separations, drug delivery, and electrochemical processes. Often overlooked in the discussion of MOF-based materials is the mass transport of guest molecules within the pores and channels. Given the wide distribution of pore sizes, linker functionalization, and crystal sizes, molecular diffusion within MOFs can be highly dependent on the MOF-guest system. In this review, we discuss the major factors that govern the mass transport of molecules through MOFs at both the intracrystalline and intercrystalline scale; provide an overview of the experimental and computational methods used to measure guest diffusivity within MOFs; and highlight the relevance of mass transfer in the applications of MOFs in electrochemical systems, separations, and heterogeneous catalysis.
RESUMO
Poloxamers, or pluronics, have been proposed as biomimetic substitutes for physiological gels. Concern regarding their ability to resist swelling under fluid flows has impeded their implementation. Using a combination of techniques including cryo-TEM and rapid X-ray imaging, we found that rapid flow rates stabilized the gels against dissolution. Energy balance calculations confirmed that disentanglement of individual micelles was not possible at time scales faster than the reptation time when the system response was that of a solid which dissipated the hydrodynamic force field via cooperative deformation. In-vivo tests were performed where the hydrogel was injected as a substitute for the nucleus pulposus following discectomy in dogs. The results indicated that the gel was still present after 3â¯months, and radiographs indicated that compression of the disc space was prevented despite the gel being exposed to constant perfusion. STATEMENT OF SIGNIFICANCE: This paper demonstrates a highly unexpected result and counter intuitive result, namely the inverse dependence of the dissociation rate of a physical hydrogel on the flow velocity of the liquid medium. Using cryo-electron microscopy we demonstrate that the gel responds like deformable solid in high flow rates, with minimal dissociation. Since these gels are thermoreversible, they were injected into dogs, where we show that they were a viable alternative to the nucleus pulposus, without dissolution in physiological fluid flows for at least three months.
Assuntos
Discotomia , Hidrogéis , Núcleo Pulposo/cirurgia , Poloxâmero , Animais , Cães , Hidrogéis/química , Hidrogéis/farmacologia , Poloxâmero/química , Poloxâmero/farmacologiaRESUMO
Modeling fluid flow dynamics in metal organic frameworks (MOFs) is a required step toward understanding mechanisms of their activity as novel catalysts, sensors, and filtration materials. We adapted a lattice Boltzmann model, previously used for studying flow dynamics in meso- and microporous media, to the nanoscale dimensions of the MOF pores. Using this model, rapid screening of permeability of a large number of MOF structures, in different crystallographic directions, is possible. The method was illustrated here on the example of an anisotropic MOF, for which we calculated permeability values in different flow directions. This method can be generalized to a large class of MOFs and used to design MOFs with the desired gas flow permeabilities.
RESUMO
We report that the addition of a non-photoactive tertiary polymer phase in the binary bulk heterojunction (BHJ) polymer solar cell leads to a self-assembled columnar nanostructure, enhancing the charge mobilities and photovoltaic efficiency with surprisingly increased optimal active blend thicknesses over 300 nm, 3-4 times larger than that of the binary counterpart. Using the prototypical poly(3-hexylthiophene) (P3HT):fullerene blend as a model BHJ system, we discover that the inert poly(methyl methacrylate) (PMMA) added in the binary BHJ blend self-assembles into vertical columns, which not only template the phase segregation of electron acceptor fullerenes but also induce the out-of-plane rotation of the edge-on-orientated crystalline P3HT phase. Using complementary interrogation methods including neutron reflectivity, X-ray scattering, atomic force microscopy, transmission electron microscopy, and molecular dynamics simulations, we show that the enhanced charge transport originates from the more randomized molecular stacking of the P3HT phase and the spontaneous segregation of fullerenes at the P3HT/PMMA interface, driven by the high surface tension between the two polymeric components. The results demonstrate a potential method for increasing the thicknesses of high-performance polymer BHJ solar cells with improved photovoltaic efficiency, alleviating the burden of stringently controlling the ultrathin blend thickness during the roll-to-roll-type large-area manufacturing environment.
RESUMO
We use molecular dynamics simulations to study structure formation in physically associating nanocomposite hydrogels. Nanofillers were modeled as rigid bodies of disk-like shapes and physical crosslinks were simulated by introducing a short-range attraction between the nanofillers and polymer chain ends. The structure, dynamics and mechanics of these polymer gels were studied as a function of nanofiller volume fraction. We observe the formation of a percolated network in the hydrogels, with an ordered local structure but disordered globally, as we increase the filler fraction. This locally ordered structure was a result of the anisotropy of the disk-like fillers. The dynamics of polymers showed significant caging effects in the gel state. Stress autocorrelation and elongation results were analyzed as a function of nano-filler concentrations. Comparisons with nanofillers of different shapes showed that disk-like nanofillers are more effective in strengthening the hydrogels than spherical nanofillers.
RESUMO
Correction for 'Manipulation of cell adhesion and dynamics using RGD functionalized polymers' by Juyi Li et al., J. Mater. Chem. B, 2017, DOI: .
RESUMO
We have successfully synthesized an ABA tri-block co-polymer of poly(methacrylic acid)-block-poly(2-hydroxyethyl methacrylate)-block-poly(methacrylic acid), having Mw = 100k and 272k where we were able to insert RDG or RGD peptide sequences using thiol-acrylate Michael addition. A soft silicone stamp was then used to imprint a 0.4-micron wide grating of the copolymer with a period of 10 microns. The samples were then examined with atomic force microscopy after application of an external electric field and the pattern was observed to stretch by a factor of five. Cells plated onto these substrates showed clear preference for the striped patterns formed under the influence of the external field, and no preferential attachment to the patterns formed in the absence of the field. Cell migration experiments, using the agarose droplet method, performed on spun cast copolymer films showed minimal migration and adhesion on the substrates without peptides or those with only with the RDG peptide, while good adhesion and significant outward migration was observed for cells plated on the copolymers with the RGD sequence. Taken together these results confirmed our hypothesis that a smart biomimetic polymer substrate could be constructed where functional domains could be revealed selectively allowing us to mimic the natural design of engineered tissue constructs.
RESUMO
Initial cell-surface interactions are guided by the material properties of substrate topography. To examine if these interactions are also modulated by the presence of zinc, we seeded murine pre-osteoblasts (MC3T3-E1, subclone 4) on micropatterned polydimethylsiloxane (PDMS) containing wide (20 µm width, 30 µm pitch, 2 µm height) or narrow (2 µm width, 10 µm pitch, 2 µm height) ridges, with flat PDMS and tissue culture polystyrene (TC) as controls. Zinc concentration was adjusted to mimic deficient (0.23 µM), serum-level (3.6 µM), and zinc-rich (50 µM) conditions. Significant differences were observed in regard to cell morphology, motility, and contact guidance. We found that cells exhibited distinct anisotropic migration on the wide PDMS patterns under either zinc-deprived (0.23 µM) or serum-level zinc conditions (3.6 µM). However, this effect was absent in a zinc-rich environment (50 µM). These results suggest that the contact guidance of pre-osteoblasts may be partly influenced by trace metals in the microenvironment of the extracellular matrix.
RESUMO
We have shown that en masse cell migration of fibroblasts on the planar surface results in a radial outward trajectory, and a spatially dependent velocity distribution that decreases exponentially in time towards the single cell value. If the cells are plated on the surface of aligned electrospun fibers above 1 microm in diameter, they become polarized along the fiber, expressing integrin receptors which follow closely the contours of the fibers. The velocity of the cells on the fibrous scaffold is lower than that on the planar surface, and does not depend on the degree of orientation. Cells on fiber smaller than 1 microm migrate more slowly than on the planar surface, since they appear to have a large concentration of receptors. True three-dimensional migration can be observed when plating the droplet on a scaffold comprises of at least three layers. The cells still continue to migrate on the fibers surfaces, as they diffuse into the lower layers of the fibrous scaffold.
Assuntos
Técnicas de Cultura de Células , Movimento Celular/fisiologia , Fibroblastos , Microtecnologia , Alicerces Teciduais , Adesão Celular/fisiologia , Técnicas de Cultura de Células/instrumentação , Técnicas de Cultura de Células/métodos , Células Cultivadas , Fibroblastos/metabolismo , Fibroblastos/ultraestrutura , Humanos , Microtecnologia/instrumentação , Microtecnologia/métodos , Polimetil Metacrilato/química , Propriedades de Superfície , Vinculina/metabolismoRESUMO
We studied the surface migration of DNA chains driven by a dc electric field across localized dielectrophoretic traps. By adjusting the length scale of the trap array, separation of a selected band of DNA was accomplished with a scaling exponent between mobility and number of base pairs similar to that obtained in capillary electrophoresis. We then provided a model, which predicts the trapping and extension of DNA chains at a dielectrophoretic trap responsible for the surface mobility and separation.
Assuntos
DNA Viral/química , Campos Eletromagnéticos , Movimento , Eletroforese , Ouro/química , Microscopia Confocal , Silício/química , Propriedades de SuperfícieRESUMO
We demonstrate that electrophoresis on a flat Si substrate is an effective method in separation of DNA with different configurations, e.g., linear, supercoiled, and relaxed or DNA of different length, e.g., supercoiled DNA ladder. The surface separation arises from the different number of contacts due to the conformational differences between adsorbed DNA chains. Imposing a Au nanopattern on the Si surface further improves the separation effect. The simulation of electric field on this patterned surface by the finite element method shows that Au nanodots act as local pinning points for DNA segments due to dielectrophoretic force. The results of molecular dynamics simulation showed that the conformational differences between adsorbed polymer chains were amplified on the patterned surface and enhanced separations were achieved, which are consistent with the experimental results.
Assuntos
DNA/química , DNA/isolamento & purificação , Nanoestruturas/química , Simulação por Computador , DNA Super-Helicoidal/química , DNA Super-Helicoidal/isolamento & purificação , Elétrons , Ouro/química , Microscopia Eletrônica de Varredura , Nanoestruturas/ultraestrutura , Plasmídeos/química , Plasmídeos/isolamento & purificação , Propriedades de SuperfícieRESUMO
In order to increase the separation rate of surface electrophoresis while preserving the resolution for large DNA chains, e.g., genomic DNA, the mobility and diffusion of Lambda DNA chains adsorbed on flat silicon substrate under an applied electric field, as a function of migration distance, ionic strength, and field intensity, were studied using laser fluorescence microscope. The mobility was found to follow a power law with the field intensity beyond a certain threshold. The detected DNA peak width was shown to be constant with migration distance, slightly smaller with stronger field intensity, but significantly decreased with higher ionic strength. The molecular dynamics simulation demonstrated that the peak width was strongly related with the conformation of DNA chains adsorbed onto surface. The results also implied that there was no diffusion of DNA during migration on surface. Therefore, the Nernst-Einstein relation is not valid in the surface electrophoresis and the separation rate could be improved without losing resolution by decreasing separation distance, increasing buffer concentration, and field intensity. The results indicate the fast separation of genomic DNA chains by surface electrophoresis is possible.
Assuntos
DNA/química , DNA/isolamento & purificação , Eletroforese , Bacteriófago lambda/química , Bacteriófago lambda/genética , Difusão , Eletricidade , Concentração Osmolar , Propriedades de SuperfícieRESUMO
We have developed a dynamic self-consistent field theory, without any adjustable parameters, for unentangled polymer blends under shear. Our model accounts for the interaction between polymers, and enables one to compute the evolution of the local rheology, microstructure, and the conformations of the polymer chains under shear self-consistently. We use this model to study the interfacial dynamics in sheared polymer blends and make a quantitative comparison between this model and molecular dynamics simulations. We find good agreement between the two methods.
RESUMO
We use molecular dynamics simulations to study the mechanism by which a flat, homogeneous surface can serve as an electrophoretic separation medium for DNA. We find that the mobility of DNA on the surface is a function of the conformation of the adsorbed DNA molecule, and that this mobility is controlled by the attraction between the DNA and the surface. Our results will provide guidelines for the fabrication of surfaces that can be used to separate DNA in a wide size range.
Assuntos
DNA/isolamento & purificação , Eletroforese , Modelos Químicos , Adsorção , Simulação por Computador , DNA/química , DNA/metabolismo , Modelos Moleculares , Conformação de Ácido Nucleico , Propriedades de SuperfícieRESUMO
Molecular dynamics simulations of polymers reinforced with nanoscopic filler particles reveal the mechanisms by which nanofillers improve the toughness of the material. We find that the mobility of the nanofiller particle, rather than its surface area, controls its ability to dissipate energy. Our results show similarities between the toughening mechanisms observed in polymer nanocomposites and those postulated for biological structural materials such as spider silk and abalone adhesive.