Unleashing the Full Potential of Electrochromic Heterostructured Nickel-Cobalt Phosphate for Optically Active High-Performance Asymmetric Quasi-Solid-State Supercapacitor Devices.

The rational design of hybrid systems that combine capacitor and battery merits is crucial to enable the fabrication of high energy and power density devices. However, the development of such systems remains a significant barrier to overcome. Herein, we report the design of a Ni-Co phosphate (Ni3-xCox(PO4)2·8H2O) nanoplatelet-based system via a facile coprecipitation method at ambient conditions. The nanoplatelets exhibit multicomponent synergy, exceptional charge storage capabilities, rich redox active sites (ameliorating the redox reaction activity), and high ionic diffusion rate/electron transfer kinetics. The designed Ni3-xCox(PO4)2·8H2O offered a respectable gravimetric specific capacity and marvelous capability rate (966 and 595 C g-1 at 1 and 15 A g-1) over the Ni3(PO4)2·8H2O (327.3 C g-1) and Co3(PO4)2·8H2O (68 C g-1) counterparts. Additionally, the nanoplatelets showed enhanced photoactive storage performance with a 9.7% increase in the recorded photocurrent density. Upon integration of Ni3-xCox(PO4)2·8H2O as a positive pole and commercial activated carbon as a negative pole, the constructed hybrid supercapacitor device with PVA@KOH quasi-gel electrolyte exhibits great energy and power densities of 77.7 Wh kg-1 and 15998.54 W kg-1 with remarkable cycling stability of 6000 charging/discharging cycles and prominent Coulombic efficiency of 100%. Interestingly, two assembled devices are capable of glowing a red LED bulb for nearly 180 s. This research paves the way to design and fabricate electroactive species via a facile approach for boosting the design of a plethora of supercapattery devices.

Cost-Effective Face Mask Filter Based on Hybrid Composite Nanofibrous Layers with High Filtration Efficiency.

One of the main protective measures against COVID-19's spread is the use of face masks. It is therefore of the utmost importance for face masks to be high functioning in terms of their filtration ability and comfort. Notwithstanding the prevalence of the commercial polypropylene face masks, its effectiveness is under contention, leaving vast room for improvement. During the pandemic, the use of at least one mask per day for each individual results in a massive number of masks that need to be safely disposed of. Fabricating biodegradable filters of high efficiency not only can protect individuals and save the environment but also can be sewed on reusable/washable cloth masks to reduce expenses. Wearing surgical masks for long periods of time, especially in hot regions, causes discomfort by irritating sensitive facial skin and warmed inhaled air. Herein, we demonstrate the fabrication of novel electrospun composites layers as face mask filters for protection against pathogens and tiny particulates. The combinatorial filter layers are made by integrating TiO2 nanotubes as fillers into chitosan/poly(vinyl alcohol) polymeric electrospun nanofibers as the outer layer. The other two filler-free layers, chitosan/poly(vinyl alcohol) and silk/poly(vinyl alcohol) as the middle and inner composite layers, respectively, were used for controlled protection, contamination prevention, and comfort for prolonged usage. The ASTM standards evaluation tests were adopted to evaluate the efficacy of the assembled filter, revealing high filtration efficiency compared to that of commercial surgical masks. The TiO2/Cs/PVA outer layer significantly reduced Staphylococcus aureus bacteria by 44.8% compared to the control, revealing the dual effect of TiO2 and chitosan toward the infectious bacterial colonies. Additionally, molecular dynamics calculations were used to assess the mechanical properties of the filter layers.

Binder-Free Electrospun Ni-Mn-O Nanofibers Embedded in Carbon Shells with Ultrahigh Energy and Power Densities for Highly Stable Next-Generation Energy Storage Devices.

We demonstrate the fabrication of binder-free electrospun nickel-manganese oxides embedded into carbon-shell fibrous electrodes. The morphological and structural properties of the assembled electrode materials were elucidated by high-resolution transmission electron microscopy (HR-TEM), field-emission scanning electron microscopy, and glancing-angle X-ray diffraction. The fibrous structure of the electrodes was retained even after annealing at high temperatures. The X-ray photoelectron spectroscopy and HR-TEM analyses revealed the formation of nickel and manganese oxides in multiple oxidation states (Ni2+, Ni3+, Mn2+, Mn3+, and Mn4+) embedded in the carbon shell. The embedded nickel-manganese oxides into the carbon matrix fibrous electrodes exhibit an excellent capacitance (1082 F/g) in 1 M K2SO4 at 1 A/g and possess a high rate capability of 73% at 5 A/g. The high rate capability and capacitance can be attributed to the presence of carbon cross-linked channels, the binder-free nature of the electrodes, and various oxidation states of the Ni-Mn oxides. The asymmetric supercapacitor device constructed of the as-fabricated nanofibers and the bio-derived microporous carbon as the positive and negative electrodes, respectively, sustains up to 1.9 V with a high specific capacitance at 1.5 A/g of 108 F/g. The nanofibrous//bio-derived device exhibits an outstanding specific energy of 54.2 W h/kg with a high specific power of 1425 W/kg. Interestingly, the tested device maintains a high capacitive retention of 92% upon cycling over 10,000 charging/discharging cycles.