Mechanistic understanding of asphaltene precipitation and oil recovery enhancement using SiO2 and CaCO3 nano-inhibitors.

Asphaltene precipitation in oil reservoirs, well equipment, and pipelines reduces production, causing pore blockage, wettability changes, and decreased efficiency. Asphaltenes, with their unique chemical structure, self-assemble via acid-base interactions and hydrogen bonding. Nano-inhibitors prevent asphaltene aggregation at the nanoscale under reservoir conditions. This study investigates the effect of two surface-modified nanoparticles, silica, and calcium carbonate, as asphaltene inhibitors and oil production agents. The impacts of these nano-inhibitors on asphaltene content, onset point, wettability, surface tension, and oil recovery factor were determined to understand their mechanism on asphaltene precipitation and oil production. Results demonstrate that these nano-inhibitors can significantly postpone the onset point of asphaltene precipitation, with varying performance. Calcium carbonate nano-inhibitor exhibits better efficiency at low concentrations, suspending asphaltene molecules in crude oil. In contrast, silica nano-inhibitor performs better at high concentrations. Wettability alteration and IFT reduction tests reveal that each nano-inhibitor performs optimally at specific concentrations. Silica nano-inhibitors exhibit better colloidal stability and improve oil recovery more than calcium carbonate nano-inhibitors, with maximum oil recovery factors of 33% at 0.1 wt.% for silica and 25% at 0.01 wt.% for calcium carbonate nano-inhibitors.

Assessment of heavy oil recovery mechanisms using in-situ synthesized CeO2 nanoparticles.

This project investigated the impact of low-temperature, in-situ synthesis of cerium oxide (CeO2) nanoparticles on various aspects of oil recovery mechanisms, including changes in oil viscosity, alterations in reservoir rock wettability, and the resulting oil recovery factor. The nanoparticles were synthesized using a microemulsion procedure and subjected to various characterization analyses. Subsequently, these synthesized nanoparticles were prepared and injected into a glass micromodel, both in-situ and ex-situ, to evaluate their effectiveness. The study also examined the movement of the injected fluid within the porous media. The results revealed that the synthesized CeO2 nanoparticles exhibited a remarkable capability at low temperatures to reduce crude oil viscosity by 28% and to lighten the oil. Furthermore, the addition of CeO2 nanoparticles to the base fluid (water) led to a shift in the wettability of the porous medium, resulting in a significant reduction in the oil drop angle from 140° to 20°. Even a minimal presence of CeO2 nanoparticles (0.1 wt%) in water increased the oil production factor from 29 to 42%. This enhancement became even more pronounced at a concentration of 0.5 wt%, where the oil production factor reached 56%. Finally, it was found that the in-situ injection, involving the direct synthesis of CeO2 nanoparticles within the reservoir using precursor salts solution and reservoir energy, led to an 11% enhancement in oil production efficiency compared to the ex-situ injection scenario, where the nanofluid is prepared outside the reservoir and then injected into it.

Utilization of synthesized silane-based silica Janus nanoparticles to improve foam stability applicable in oil production: static study.

This study investigated the effect of silane-based silica (SiO2) Janus nanoparticles (JNPs) on stabilizing the foam generated by different types of gases. Two types of SiO2 JNPs were synthesized through surface modification using HMDS and APTS silane compounds. Static analyses were conducted to examine the impact of different concentrations of the synthesized nanoparticles in various atmospheres (air, CO2, and CH4) on surface tension, foamability, and foam stability. The results indicated that the synthesized SiO2 JNPs and bare SiO2 nanoparticles exhibited nearly the same ability to reduce surface tension at ambient temperature and pressure. Both of these nanoparticles reduced the surface tension from 71 to 58-59 mN m-1 at 15,000 ppm and 25 °C. While bare SiO2 nanoparticles exhibited no foamability, the synthesis of SiO2 JNPs significantly enhanced their ability to generate and stabilize gas foam. The foamability of HMDS-SiO2 JNPs started at a higher concentration than APTS-SiO2 JNPs (6000 ppm compared to 4000 ppm, respectively). The type of gas atmosphere played a crucial role in the efficiency of the synthesized JNPs. In a CH4 medium, the foamability of synthesized JNPs was superior to that in air and CO2. At a concentration of 1500 ppm in a CH4 medium, HMDS-SiO2 and APTS-SiO2 JNPs could stabilize the generated foam for 36 and 12 min, respectively. Due to the very low dissolution of CO2 gas in water at ambient pressure, the potential of synthesized JNPs decreased in this medium. Finally, it was found that HMDS-SiO2 JNPs exhibited better foamability and foam stability in all gas mediums compared to APTS-SiO2 JNPs for use in oil reservoirs. Also, the optimal performance of these JNPs was observed at a concentration of 15,000 ppm in a methane gas medium.