18F-fluorodeoxyglucose PET-CT-guided pelvic chemoradiation therapy using helical tomotherapy for locally advanced carcinoma cervix without para-aortic nodal disease: Clinical and patient-reported outcomes from a prospective phase 2 study.

INTRODUCTION: Locally advanced carcinoma cervix (LACC) is a heterogeneous disease with variable combinations of primary tumour extensions with or without nodal involvement. Metabolic information from 18 fluro-deoxyglucose positron emission tomography combined with contrast-enhanced computerized tomography (FDG PET-CT) may potentially augment treatment decision-making for LACC. This study ascertained FDG-PET CT influence on chemoradiation therapy (CTRT) decisions in LACC. We report oncologic and patient-reported outcome measures (PROMs). METHODS: FDG PET-CT scans were reviewed independently by two nuclear medicine specialists and two radiation oncologists. Pelvic CTRT plan digressions were documented and therapy was adapted accordingly. Pelvis radiation (50 Gy/25#/5 weeks) using tomotherapy with weekly cisplatin was used in node-negative disease. Dose-escalated simultaneous integrated boost (SIB) 60 Gy/25#/5 weeks was delivered to involved pelvic nodes. All received brachytherapy. Post-treatment PET-CT scans were at 6 months. Functional assessment of cancer therapy scores were calculated at baseline, treatment completion, 3 months, 1 year and 3 years. RESULTS: Between November 2015 and January 2018, 85 patients were screened, and 77 consented. Extrapelvic disease was seen in 12 (16%) patients (9 para-aortic nodes, 2 distant metastases and 1 synchronous carcinoma breast); 60 patients were included in the final analysis. Decision changes were seen in 10/77 (13%) screened, 8/60 (13%) included and 32 (53.3%) received SIB. Post-treatment, 27 (45%) had grade 2 GI/GU/GYN toxicity, one (2%) had grade 3 GI and five (8.3%) had grade 3 neutropenia. At median overall survival of 54.2 months (95% CI 52.8-58.3), 5-year local failure, pelvic nodal and para-aortic nodal-free survival were 86.8% (95% CI 78.0-96.6), 85.2% (95% CI 76.1-95.3) and 85.2% (95% CI 76.2-95.4). Functional assessment of cancer therapy trial outcome index (FACT TOI) improved by 10.43 at 3 months with no further decline. Grade 3 toxicity was noted for abdominal pain in one (1.7%), cystitis in four (6.7%) and lymphoedema in one (1.7%) at 5 years. CONCLUSION: PET-CT resulted in major decision changes in 13%. PET-adapted CTRT was associated with acceptable toxicity, encouraging long-term survival and improvement in PROMS.

Spray-Deposited Anisotropic Assemblies of Plasmonic Nanowires for Direction-Sensitive Strain Measurement.

The development of nanoscale composites with hierarchical architecture and complex anisotropies enables the fabrication of new classes of devices. Stretchable strain sensors have been developed in the past for applications in various fields such as wearable electronics and soft robotics, yet the sensing capacities of most of these sensors are independent of the direction of deformation. In the present work, we report on the preparation of a direction-sensitive strain sensor using the anisotropic optical properties of a monolayer of oriented plasmonic 1D nano-objects. Grazing incidence spraying (GIS) is used for depositing a monolayer of in-plane aligned silver nanowires with a controlled density on a deformable and transparent substrate. Using the selective excitation of transverse and longitudinal localized plasmon resonance modes of silver nanowires by polarized UV-visible-NIR spectroscopy, we show that the macroscopic anisotropic properties of the monolayer upon stretching are highly dependent on the stretching direction and light polarization. Measuring the polarized optical properties of the anisotropic thin films upon stretching thus allow for retrieving both the local strain and the direction of the deformation using a simple model.

Elastomeric microwell-based triboelectric nanogenerators by in situ simultaneous transfer-printing.

Self-powered tactile module-based electronic skins incorporating triboelectric nanogenerator (TENG) appears to be a worthwhile alternative for smart monitoring devices in terms of sustainable energy harvesting. On top of it, ultra-stretchability and detection sensitivity are imperative to mimic human skin. We report, for the first time, a metal-free single electrode TENG-based self-powered tactile module comprising of microwells (diameters 2 µm and 200 nm, respectively) on fluoroelastomer (FKM) and laser induced graphene (LIG) electrodes by in situ simultaneous transfer printing method. Direct imprinting of both the active surface and LIG electrode on a tribonegative FKM has not been attempted before. The resulting triboelectric module exhibits impressive maximum power density of 715 mW m-2, open circuit voltage and maximum output current of 148 V and 9.6 µA respectively for a matching load of 10 MΩ. Moreover, the TENG unit is very robust and sustained high electrical output even at 200% elongation. A dielectric-to-dielectric TENG-based tactile sensor is also constructed using FKM (negative tribolayer) and TiO2 deposited micropatterned PDMS. Resulting tribo-sensor demonstrates remarkable motion and force sensitivity. It can also distinguish subtle human contact force that can simulate skin with high sensitivity and therefore, can be utilized for potential e-skin/bionic skin applications in health and human-machine interfaces.

Multidisciplinary management of ovarian germ cell tumours-a single institutional study from India.

BACKGROUND: Ovarian germ cell tumours constitute a heterogeneous group of neoplasm with malignant potential being seen in 5% of cases. There is limited data on treatment outcomes of patients with malignant ovarian germ cell tumours (MOGCT). Here, we present our hospital audit of patients with MOGCT. MATERIAL AND METHODS: This is a retrospective data review of patients with MOGCT treated between May 2011 and December 2019. Patients were treated with staging laparotomy and adjuvant chemotherapy, wherever applicable. Surveillance was allowed for those at low risk for recurrence. Clinicopathologic features and treatment details were recorded, and survival analysis was performed. RESULTS: Sixty-five patients with a median age of 25 years (range: 11-52 years) were treated during the study period. The most common histology was immature teratoma in 35.3% of cases. International Federation of Gynecology and Obstetrics stage IC was the most common stage of presentation (47%). Surveillance was advised for 12.3% of cases. Systemic therapy was given in 51 (78%) patients. At a median follow-up of 46 months (range: 1-109 months), the median progression-free survival (PFS) was not reached. Five-year PFS was 79.3% (95% CI: 65.8-88). The most common toxicity was febrile neutropenia (22%) among those who received systemic therapy. CONCLUSION: Immature teratoma was the most common histology in our series. The majority presented in the early stage. MOGCT is a highly curable disease with surgery and systemic therapy.

Enhanced recovery after surgery (ERAS) in cytoreductive surgery (CRS) and hyperthermic intraperitoneal chemotherapy (HIPEC): a cross-sectional survey.

OBJECTIVES: Enhanced recovery after surgery (ERAS) protocols have been questioned in patients undergoing cytoreductive surgery (CRS) with/without hyperthermic intraperitoneal chemotherapy (HIPEC) for peritoneal malignancies. This survey was performed to study clinicians' practice about ERAS in patients undergoing CRS-HIPEC. METHODS: An online survey, comprising 76 questions on elements of prehabilitation (n=11), preoperative (n=8), intraoperative (n=16) and postoperative (n=32) management, was conducted. The respondents included surgeons, anesthesiologists, and critical care specialists. RESULTS: The response rate was 66% (136/206 clinicians contacted). Ninety-one percent of respondents reported implementing ERAS practices. There was encouraging adherence to implement the prehabilitation (76-95%), preoperative (50-94%), and intraoperative (55-90%) ERAS practices. Mechanical bowel preparation was being used by 84.5%. Intra-abdominal drains usage was 94.7%, intercostal drains by 77.9% respondents. Nasogastric drainage was used by 84% of practitioners. The average hospital stay was 10 days as reported by 50% of respondents. A working protocol and ERAS checklist have been designed, based on the results of our study, following recent ERAS-CRS-HIPEC guidelines. This protocol will be prospectively validated. CONCLUSIONS: Most respondents were implementing ERAS practices for patients undergoing CRS-HIPEC, though as an extrapolation of colorectal and gynecological guidelines. The adoption of postoperative practices was relatively low compared to other perioperative practices.

Improving particle detection and size estimation accuracy in digital in-line holography using autoregressive interpolation.

The accuracy of particle detection and size estimation is limited by the physical size of the digital sensor used to record the hologram in a digital in-line holographic imaging system. In this paper, we propose to utilize the autoregressive (AR) interpolation of the hologram to increase pixel density and, effectively, the quality of hologram reconstruction. Simulation studies are conducted to evaluate the influence of AR interpolation of a hologram on the accuracy of detection and size estimation of single and multiple particles of varying sizes. A comparative study on the performance of different interpolation techniques indicates the advantage of the proposed AR hologram interpolation approach. An experimental result is provided to validate the suitability of the proposed algorithm in practical applications.

Designing Supertough and Ultrastretchable Liquid Metal-Embedded Natural Rubber Composites for Soft-Matter Engineering.

Functional elastomers with incredible toughness and stretchability are indispensable for applications in soft robotics and wearable electronics. Furthermore, coupled with excellent electrical and thermal properties, these materials are at the forefront of recent efforts toward widespread use in cutting-edge electronics and devices. Herein, we introduce a highly deformable eutectic-GaIn liquid metal alloy-embedded natural rubber (NR) architecture employing, for the first time, industrially viable solid-state mixing and vulcanization. Standard methods of rubber processing and vulcanization allow us to fragment and disperse liquid metals into submicron-sized droplets in cross-linked NR without compromising the elastic properties of the base matrix. In addition to substantial boosts in mechanical (strain at failure of up to ∼650%) and elastic (negligible hysteresis loss) performances, the tearing energy of the composite was enhanced up to 6 times, and a fourfold reduction in the crack growth rate was achieved over a control vulcanizate. Moreover, we demonstrate improved thermal conductivity and dielectric properties for the resulting composites. Therefore, this work provides a facile and scalable pathway to develop liquid metal-embedded soft elastomeric composites that could be instrumental toward potential applications in soft-matter engineering.

Autofocusing in digital holography using eigenvalues.

A new autofocusing algorithm for digital holography is proposed based on the eigenvalues of the images reconstructed at different distances in the measurement volume. An image quality metric evaluated based on the distribution of its eigenvalues is compared in function of the reconstruction distance to identify the location of the focal plane. The proposed automatic focal plane detection algorithm is capable of working with amplitude objects, phase objects, and mixed type objects. A performance comparison of the proposed algorithm with some previously reported representative algorithms is provided. The simulation and experimental results demonstrate the practical applicability of the proposed algorithm.

Poly(acrylonitrile-co-butadiene) as polymeric crosslinking accelerator for sulphur network formation.

The major controlling factors that determine the various mechanical properties of an elastomer system are type of chemical crosslinking and crosslink density of the polymer network. In this study, a catalytic amount of acrylonitrile butadiene copolymer (NBR) was used as a co-accelerator for the curing of polybutadiene (BR) elastomer. After the addition of this copolymer along with other conventional sulphur ingredients in polybutadiene compounds, a clear and distinct effect on the curing and other physical characteristics was noticed. The crosslinking density of BR was increased, as evidenced by rheometric properties, solid-state NMR and swelling studies. The vulcanization kinetics study revealed a substantial lowering of the activation energy of the sulphur crosslinking process when acrylonitrile butadiene copolymer was used in the formulation. The compounds were also prepared in the presence of carbon black and silica, and it was found that in the carbon black filled system the catalytic effect of the NBR was eminent. The effect was not only reflected in the mechanical performance but also the low-temperature crystallization behavior of BR systems was altered.