Isolation and Evaluation of the Probiotic Activity of Lactic Acid Bacteria Isolated from Pickled Brassica juncea (L.) Czern. et Coss.

The naturally occurring lactic acid bacteria can be isolated from various sources. Pickled Brassica juncea (L.) Czern. et Coss. was used to isolate lactic acid bacteria (LAB). This study was conducted to compare the probiotic properties of probiotics isolated from pickled Vietnamese cabbage with some commercial strains of probiotics available on the Vietnamese market. The results showed that two strains (Lactobacillus fermentum and Lactiplantibacillus plantarum) isolated from pickled Vietnamese cabbage and three commercial strains of probiotics (Bacillus subtilis, Bacillus clausii, Lactobacillus acidophilus) all showed probiotic properties. Probiotic properties were evaluated through the ability to survive in low pH, pepsin, pancreatin, and bile salt media, the hydrophobicity of the bacteria, the antibiotic resistance, and the resistance to pathogenic bacteria. The isolated strain Lactiplantibacillus plantarum had fewer probiotic properties than Bacillus subtilis but more than the two commercial strains Bacillus clausii and Lactobacillus acidophilus, and the isolated Lactobacillus fermentum showed the fewest probiotic properties of the five strains.

Alfa glucosidase inhibitory, anti inflammatory activities and a new furanocoumarin derivative of Ruellia tuberosa.

Rullia tuberosa L. is used for treatment of diabetes mellitus, anti-inflammation, etc. However, its hypoglycaemic and anti inflammatory activities has not been investigated so far. In the present study, the α-glucosidase inhibitory, anti inflammatory activities of the extract of this plant were investigated. Our results showed that the crude extract as well as ethyl acetate and methanol fractions showed α-glucosidase inhibitory activity with IC50 of 15.84, 4.73 and 8.27 µg/ml, respectively. In addition, the hexane and ethyl acetate fractions are capable of inhibiting LPS-induced NO production with IC50 of 17.41 and 23.95 µg/mL, respectively. From the ethyl acetate and methanol fractions, eight compounds, including isobargaptol 5-O-ß-D-glucopyranoside (1), syringaresinol (2), catechin (3), pulmatin (4), stigmast-4-en-3-on (4), verbascoside (5), hydroxymethylfurfural (6), rutin (7), and homoplantaginin (8) were extracted and isolated. Their chemical structures were elucidated by spectroscopic method including MS, 1 D and 2 D- NMR and comparison with the literature values.

Characterization and Drug Release Control Ability of Chitosan/Lovastatin Particles Coated by Alginate.

We report on the coating of chitosan/lovastatin particles with a liquid solution of alginate using a 3D printing technique. The prepared particles are characterized by Scanning Electronic Microscopy, Infrared Spectroscopy, Dynamic Light Scattering, Differential Scanning Calorimetry, and Ultraviolet-Visible Spectroscopy. Characterization results reveal that the coating of alginate makes a considerable difference in the structure, morphology, size distribution and zeta potential of the chitosan/lovastatin particles, and the size of the coated particles is increased after the coating. We also demonstrate the drug release ability of the chitosan/lovastatin particles in simulated gastric fluid and controlled in simulated intestinal fluid. Drug release study reveals that the drug release profile of the coated particles varies significantly with the pH of the solution and the coating process significantly reduces the rate of release of the drug. We also report that the bioavailability of lovastatin particles can be improved by coating with the biopolymer layers.

Combination of Mycorrhizal Symbiosis and Root Grafting Effectively Controls Nematode in Replanted Coffee Soil.

Replanting for sustainable development is one of the critical missions of the coffee industry in the Daklak province, Vietnam. However, this plan has been faced with many difficulties including poor survival and growth rates due to the low nematode tolerance of young coffee plants in replanted fields. Mycorrhizal symbiosis and grafting have been applied separately but not yet resulted in the expected results of the replanting plan. Whether the combination of them would help managing nematode in the soil and consequently enhance the replanted efficiency is largely unknown. Mycorrhizal symbiosis was applied to Coffea canephora plants or/and grafted onto Coffea liberica rootstock, which were grown and compared to the untreated ones in both net-house-pots and the replanted plantation. The survival rate, growth indicators and the soil pathogens were monitored during the experimental periods. The combination of grafting and mycorrhiza symbiotic techniques significantly decreased the nematode densities in the replanted soil. As a result, the survival rate and growth indicators of the coffee in the replanted soil treated by the combined technique were better than treated by the two separate techniques. The results suggested that the combination of grafting and mycorrhiza symbiotic techniques would propose a potentially effective Pratylenchus coffeae and Meloidogyne incognita nematode management in replanted coffee fields in the Daklak province, Vietnam.

Potential application of chicken manure biochar towards toxic phenol and 2,4-dinitrophenol in wastewaters.

In this study, chicken manure biochar (CBC) was prepared and applied as adsorbent for the removal of phenolic pollutants including phenol (Ph) and 2,4-Dinitrophenol (DNP) from wastewaters. The feasibility analysis was focused on the adsorption effects of various factors, such as initial concentration, adsorbent dosage and reaction time. The results showed that BC could efficiently remove the Ph and DNP within 90 min of reaction time. Increasing of CBC dosage up to 0.3 g results in the maximum removal efficiency of Ph and DNP and lowers initial concentration which is beneficial for the adsorption of phenolic compounds. The second-order kinetic model and the Langmuir isotherm provided the best correlation with the adsorption data. Based on the Langmuir isotherm, maximum adsorption capacities (qmax) of Ph and DNP were found at 106.2 and 148.1 mg g-1, respectively. The obtained qmax values for CB were higher than those reported in literature on the adsorption of Ph and DNP using different biochar. Analyzing the regeneration characteristics, BC displayed high reusability with less than 20% loss in adsorption capacities of Ph and DNP, even after five repeated cycles. Investigation of the adsorption equilibrium under various conditions suggested several possible interaction mechanisms, including hydrogen bonding, electrostatic interaction and π- π bonding, which were attributed to the binding affinity of the adsorbent-adsorbate interaction. In the field application, the CBC showed an excellent removal efficiencies of Ph and DNP from industrial wastewaters (around 80% phenolic pollutants were removed). These findings support the potential use of CBC as effective adsorbent for treatment of wastewater containing Ph and DNP.

Radiation Degradation of ß-Glucan with a Potential for Reduction of Lipids and Glucose in the Blood of Mice.

: Water-soluble and low molecular weight (Mw) ß-glucans were successfully prepared by γ-irradiation of water-insoluble yeast ß-glucans. The radiation dose used for the degradation of yeast ß-glucan was remarkably reduced by increasing the pH of the sample or combining with hydrogen peroxide treatment. Radiation-degraded ß-glucans with molecular weights in the range of 11-48 kDa reduced the total cholesterol, triglyceride, low density lipoprotein (LDL) cholesterol, and glucose levels in the blood of administered mice. The decreasing levels of both lipid and glucose indexes in the blood of tested mice strongly depended on the molecular weight of the ß-glucan, and the radiation-degraded ß-glucan with a molecular weight of about 25 kDa was found to be the most effective for the reduction of blood lipid and glucose levels. Particularly, the oral administration of 25 kDa ß-glucan, with a daily dose of about 2 mg per head, reduced the total cholesterol, triglyceride, LDL-cholesterol, and glucose levels in the blood of tested mice to about 47.4%, 48.5%, 45.7%, and 47.2%, respectively. The effects on the reduction of blood lipid and glucose levels were also found to be stable after 20 days of stopping administration. These results indicate that the degraded ß-glucan with a molecular weight of about 25 kDa prepared by γ-ray irradiation is a very promising ingredient that can be used in nutraceutical food for therapeutics of diabetic and dyslipidemia.

Dual Interactions of Amphiphilic Gelatin Copolymer and Nanocurcumin Improving the Delivery Efficiency of the Nanogels.

Herein, a new process to manufacture multicore micelles nanoparticles reinforced with co-assembly via hydrophobic interaction and electrostatic interaction under the help of ultrasonication was developed. The precise co-assembly between negative/hydrophobic drug and positive charged amphiphilic copolymer based pluronic platform allows the formation of complex micelles structures as the multicore motif with predefined functions. In this study, curcumin was selected as a drug model while positively charged copolymer was based on a pluronic-conjugated gelatin with different hydrophobicity length of Pluronic F87 and Pluronic F127. Under impact of dual hydrophobic and electrostatic interactions, the nCur-encapsulated core-shell micelles formed ranging from 40 nm to 70 nm and 40-100 nm by transmission electron microscopy (TEM) and Dynamic Light Scattering (DLS), respectively. It is found that the structures emerged depended on the relative lengths of the hydrophobic blocks in pluronic. Regarding g2(τ) behavior from DLS measurement, the nanogels showed a high stability in spherical form. Surprisingly, the release profiles showed a sustainable behavior of Cur from this system for drug delivery approaches. In vitro study exhibited that nCur-encapsulated complex micelles increased inhibitory activity against cancer cells growth with IC50 is 4.02 ± 0.11 mg/L (10.92 ± 0.3 µM) which is higher than of free curcumin at 9.40 ± 0.17 mg/L (25.54 ± 0.18 µM). The results obtained can provide the new method to generate the hierarchical assembly of copolymers with incorporated loading with the same property.

Facile design of an ultra-thin broadband metamaterial absorber for C-band applications.

We report a facile design of an ultra-thin broadband metamaterial absorber (MA) for C-band applications by utilizing a single layer of a metal-dielectric-metal structure of FR-4 substrate. The absorption performances are characterized using a numerical method. The proposed MA exhibits the broadband absorption response over the entire C-band spectrum range from 4.0 GHz to 8.0 GHz with absorptivity above 90% and the high absorptivity is remained over 80% for a large incident angle up to 40° under both transverse electric (TE) and transverse magnetic (TM) polarizations over the band. The origin of absorption mechanism is explained by the electric and surface current distributions, which is also supported by the retrieved constitutive electromagnetic parameters, significantly affected by magnetic resonance. In addition, compared with the previous reports, the proposed MA presents a greater practical feasibility in term of low-profile and wide incident angle insensitivity, suggesting that the proposed absorber is a promising candidate for C-band applications.

The superior photocatalytic activity of Nb doped TiO2/g-C3N4 direct Z-scheme system for efficient conversion of CO2 into valuable fuels.

In this study, we firstly aimed to use Nb as dopant to dope into the TiO2 lattice in order to narrow band gap energy or enhance photocatalytic activity of the Nb-TiO2. Then, the prepared Nb-TiO2 was combined with g-C3N4 to establish Nb-TiO2/g-C3N4 direct Z-scheme system for superior reduction of CO2 into valuable fuels even under visible light. The obtained results indicated that the band gap energy of the Nb-TiO2 (2.91 eV) was lower than that of the TiO2 (3.2 eV). In the successfully established Nb-TiO2/g-C3N4 direct Z-scheme system, the photo-excited e- in the CB of the Nb-TiO2 combined with the photo-excited h+ in the VB of the g-C3N4 preserving the existence of e- in the CB of the g-C3N4 and h+ in the VB of Nb-TiO2, and thereby, the system produced numerous amount of available e-/h+ pairs for the reduction of CO2 into various valuable fuels. In addition, the produced e- of the Nb-TiO2/g-C3N4 existing in the CB of the g-C3N4, which the potential energy is approximately -1.2 V, would be strong enough for the reduction of CO2 to generate not only CH4 and CO but also HCOOH. Among established Nb-TiO2/g-C3N4 materials, the 50Nb-TiO2/50 g-C3N4 material was the best material for the CO2 reduction.

Free-standing polypyrrole/polyaniline composite film fabricated by interfacial polymerization at the vapor/liquid interface for enhanced hexavalent chromium adsorption.

Interfacial polymerization is an innovative technique for the fabrication of polymeric films. However, the majority of studies on interfacial polymerization has focused on liquid/liquid interfaces, and little work has been done on vapor/liquid interfaces. In this paper, we present the fabrication of free-standing polypyrrole/polyaniline (PPy/PANI) composite films by interfacial polymerization at a vapor/liquid interface using FeCl3 as an oxidant. The obtained PPy/PANI composite films were characterized using Fourier transform infrared spectroscopy, X-ray diffractometry, and scanning electron microscopy. It was found that the PPy/PANI composite films consist of PANI particles evenly distributed on porous PPy film. The influence of FeCl3 concentration on the morphology of the resulting composite films was investigated. The PPy/PANI composite films show an excellent Cr(vi) adsorption capacity of 256.41 mg g-1, much higher than that of PPy-based absorbents prepared from chemical and electrochemical polymerization routes. This work thus suggests a new route for the fabrication of PPy/PANI films with highly enhanced Cr(vi) adsorption capacity for practical applications.