Combined distalization and lingual cortex remodeling during mandibular growth for facial profile improvement: a case report.

Borderline crowding poses a challenge in deciding whether or not to prescribe premolar extraction. This case report describes the two-phase nonextraction orthodontic treatment of an 11-year-old girl with a hyperdivergent skeletal Class I pattern exhibiting anterior crowding and moderate lip protrusion. The initial phase of treatment included maxillary and mandibular expansion to correct the transverse discrepancy as an early intervention. Subsequently, comprehensive treatment was initiated at the age of 13 years, with fully erupted permanent second molars and growth potential remaining. Phase II treatment involved a second round of maxillary expansion, followed by simultaneous bimaxillary total arch intrusive distalization, using interradicular, temporary skeletal anchorage devices to correct dental crowding and improve the facial profile. Although the limited retromolar space posed a challenge to mandibular tooth distalization, gradual bone remodeling was observed in the lingual cortex of the mandibular body, enabling sufficient orthodontic tooth movement without noticeable side effects. After 4 years 3 months of treatment, her dental crowding was relieved, with significant improvement in the facial profile and proper occlusion. The treatment outcomes remained stable 2 years 4 months after retention.

Dimensional accuracy, mechanical property, and optical stability of zirconia orthodontic bracket according to yttria proportions.

This in vitro study evaluated comprehensively the performances of zirconia brackets with varying yttria proportions in manufacturing advanced orthodontic brackets. Three experimental groups of zirconia brackets were fabricated using yttria-stabilized zirconia (YSZ) materials with different yttria proportions-3 mol% yttria (3Y-YSZ), 4 mol% yttria (4Y-YSZ), and 5 mol% yttria (5Y-YSZ) (Tosoh Ceramic, Japan). A polycrystalline alumina ceramic bracket (3M™ Clarity™ Advanced, MBT 0.022-in. slot) was employed as the control group. Morphological properties, including slot surface structure and dimensions, were examined using scanning electron microscopy and surface profiler analysis. Manufacturing accuracy was assessed with root mean square calculations of trueness and precision. Mechanical properties were tested, encompassing static and kinetic frictional resistance (FR) and fracture strength. Optical stability was evaluated through 20,000 cycles of thermocycling and a 7-day immersion in various coloring agents. Within the limitations of this study, zirconia brackets containing 3 to 5 mol% YSZ presented enhanced reliability in terms of dimensional accuracy and demonstrated favorable optical stability. Notably, owing to its advantageous mechanical properties, the 3Y-YSZ variant showed remarkable potential as an advanced material for fabricating orthodontic brackets.

Conservative orthodontic treatment for severe pathologic migration following total glossectomy: A case report.

Glossectomy combined with radiotherapy causes different levels of tongue function disorders and leads to severe malocclusion, with poor periodontal status in cancer survivors. Although affected patients require regular access to orthodontic care, special considerations are crucial for treatment planning. This case report describes the satisfactory orthodontic management for the correction of severe dental crowding in a 43-year-old female 6 years after treatment for tongue cancer with total glossectomy combined with radiotherapy, to envision the possibility of orthodontic care for oral cancer survivors. Extraction was performed to correct dental crowding and establish proper occlusion following alignment, after considering the possibility of osteoradionecrosis. Orthodontic mini-implants were used to provide skeletal anchorage required for closure of the extraction space and intrusion of the anterior teeth. The dental crowding was corrected, and Class I occlusal relationship was established after 36 months of treatment. The treatment outcome was sustained after 15 months of retention, and long-term follow-up was recommended.

Cone-beam computed tomography and digital model analysis of maxillary buccal alveolar bone thickness for vertical temporary skeletal anchorage device placement.

INTRODUCTION: This study aimed to quantify the buccal alveolar bone thickness (BABT) in the maxillary molar region to provide a practical guideline for vertical temporary skeletal anchorage device (TSAD) placement using cone-beam computed tomography (CBCT). It also aimed to develop a linear regression model for use in digital models to predict available BABT. METHODS: The sample for this retrospective study consisted of 31 sites (24 patients; mean age, 28.75 years; range, 18-44 years) in which vertical TSADs were placed successfully in the maxillary posterior interradicular area during the total arch distalization procedure. BABT was measured at 3 points of the interradicular space using CBCT, and the buccal alveolar region thickness (BART), which included buccal-attached gingival thickness and the buccal alveolar bone, was measured using the digital model. In CBCT, BABT was measured at the most convex point of the lamina dura of the root adjacent to the vertical TSAD mesially, at the most convex point of the lamina dura of the root adjacent to the vertical TSAD distally, and the central point between the mesial and distal points. Three linear measurements were obtained at 2, 4, and 6 mm apical to the alveolar crest: the mesial thickness, the central thickness (centralCBCT), and the distal thickness. In the digital model, the most convex points of the clinical crowns of 2 teeth adjacent to vertical TSAD and their contact point along with the corresponding Will Andrews and Lawrence Andrews ridge were identified. The horizontal distance paralleling the model base was digitally measured and recorded at 3 positions: the mesial, central, and distal points. Then, the following 3 linear measurements were taken directly on each 3-dimensional dental model: the mesial thickness, the central thickness (centralModel), and the distal thickness. RESULTS: Both BABT and BART at the central position (centralCBCT, 3.44 mm; centralModel, 6.28 mm) were thicker than at the 2 exterior positions (mesial thickness, 2.16; distal thickness, 2.59 mm; mesial thickness, 2.74 mm; distal thickness, 2.99 mm). BABT was thinnest at 2 mm from the alveolar crest, and there was no statistically significant difference between 4 mm and 6 mm. There was a strong correlation between centralModel and centralCBCT. CONCLUSIONS: The mean BABT and BART at the central position, in which we suggest placing vertical TSADs, were 3.44 ± 0.69 mm in CBCT and 6.28 ± 1.11 mm in the digital model, respectively. The minimum BABT and BART at the central position in which vertical TSAD was placed successfully were 2.38 mm in CBCT and 4.25 mm in the digital model. There was a strong correlation between centralCBCT and centralModel, and we developed a linear regression model that resulted in a useful formula for estimating the actual available BABT at the central position: centralCBCT = 0.57 × centralModel - 0.15.

Midfacial soft tissue changes after maxillary expansion using micro-implant-supported maxillary skeletal expanders in young adults: A retrospective study.

OBJECTIVE: The aim of this retrospective study was to assess the midfacial soft tissue changes following maxillary expansion using micro-implant-supported maxillary skeletal expanders (MSEs) in young adults by cone-beam computerized tomography (CBCT) and to evaluate the correlations between hard and soft tissue changes after MSE usage. METHODS: Twenty patients (mean age, 22.4 years; range, 17.6-27.1) with maxillary transverse deficiency treated with MSEs were selected. Mean expansion amount was 6.5 mm. CBCT images taken before and after expansion were superimposed to measure the changes in soft and hard tissue landmarks. Statistical analyses were performed using paired t-test and Pearson's correlation analysis on the basis of the normality of data. RESULTS: Average lateral movement of the cheek points was 1.35 mm (right) and 1.08 mm (left), and that of the alar curvature points was 1.03 mm (right) and 1.02 mm (left). Average forward displacement of the cheek points was 0.59 mm (right) and 0.44 mm (left), and that of the alar curvature points was 0.61 mm (right) and 0.77 mm (left) (p < 0.05). Anterior nasal spine (ANS), posterior nasal spine (PNS), and alveolar bone width showed significant increments (p < 0.05). Changes in the cheek and alar curvature points on both sides significantly correlated with hard tissue changes (p < 0.05). CONCLUSIONS: Maxillary expansion using MSEs resulted in significant lateral and forward movements of the soft tissues of cheek and alar curvature points on both sides in young adults and correlated with the maxillary suture opening at the ANS and PNS.

Pharyngeal Airway Morphology in Skeletal Class III With Mandibular Asymmetry is Improved After Bimaxillary Orthognathic Surgery.

PURPOSE: The relationship between pharyngeal airway morphology and jawbone movements in skeletal Class III patients with mandibular asymmetry after orthognathic surgery remains unclear. This study was to measure the changes in pharyngeal airway morphology in skeletal Class III patients with mandibular asymmetry after bimaxillary surgery and evaluate associations between changes in pharyngeal airway morphology and skeletal movements. METHODS: In this retrospective cohort study, skeletal Class III patients who underwent bimaxillary surgery were enrolled. The predictor variable was facial symmetry status divided into 2 groups, asymmetric (Group A) and symmetric (Group B). The primary outcome variables were changes in airway parameters, including cross-sectional linear distances, cross-sectional area (CSA), minimum CSA (Min-CSA), and volume; and airway asymmetry index between the preoperative and 6-month postoperative imaging studies. Correlation analysis was performed between upper airway and skeletal changes. RESULTS: Twenty-five patients were included in this study, with 15 patients in Group A (mean age: 23.00 years; BMI: 22.83) and 10 patients in Group B (mean age: 22.30 years; BMI: 22.48). Group A showed a higher asymmetry index than Group B at T0; however, no significant differences compared to Group B at T1. The airway volume was significantly decreased in the oropharynx in Group A at T1, whereas it showed no significant differences in Group B (P < .05). Lateral movement of B point and Menton showed positive correlations with changes in Min-CSA in the oropharynx and negative correlations with changes in airway asymmetry index (P < .05). CONCLUSIONS: Pharyngeal airway exhibited an asymmetrical and constricted morphology in Group A before surgery. The airway morphology in Group A showed a tendency to adopt a symmetrical and less constricted shape after surgery. The airway space was reduced in the oropharynx in Group A after surgery. Surgical correction of mandibular asymmetry correlated with the improvement of pharyngeal airway morphology.