Effect of Starting Powder Particle Size on the Thermoelectric Properties of Hot-Pressed Bi0.3Sb1.7Te3 Alloys.

P-type Bi0.3Sb1.7Te3 polycrystalline pellets were fabricated using different methods: melting and mechanical alloying, followed by hot-press sintering. The effect of starting powder particle size on the thermoelectric properties was investigated in samples prepared using powders of different particle sizes (with micro- and/or nano-scale dimensions). A peak ZT (350 K) of ~1.13 was recorded for hot-pressed samples prepared from mechanical alloyed powder. Moreover, hot-pressed samples prepared from ≤45 µm powder exhibited similar ZT (~1.1). These high ZT values are attributed both to the presence of high-density grain boundaries, which reduced the lattice thermal conductivity, as well as the formation of antisite defects during milling and grinding, which resulted in lower carrier concentrations and higher Seebeck coefficient values. In addition, Bi0.3Sb1.7Te3 bulk nanocomposites were fabricated in an attempt to further reduce the lattice thermal conductivity. Surprisingly, however, the lattice thermal conductivity showed an unexpected increasing trend in nanocomposite samples. This surprising observation can be attributed to a possible overestimation of the lattice thermal conductivity component by using the conventional Wiedemann-Franz law to estimate the electronic thermal conductivity component, which is known to occur in nanocomposite materials with significant grain boundary electrical resistance.

Evidence of Biorealistic Synaptic Behavior in Diffusive Li-based Two-terminal Resistive Switching Devices.

Following the recent advances in artificial synaptic devices and the renewed interest regarding artificial intelligence and neuromorphic computing, a new two-terminal resistive switching device, based on mobile Li+ ions is hereby explored. Emulation of neural functionalities in a biorealistic manner has been recently implemented through the use of synaptic devices with diffusive dynamics. Mimicking of the spontaneous synaptic weight relaxation of neuron cells, which is regulated by the concentration kinetics of positively charged ions like Ca2+, is facilitated through the conductance relaxation of such diffusive devices. Adopting a battery-like architecture, using LiCoO2 as a resistive switching cathode layer, SiOx as an electrolyte and TiO2 as an anode, Au/LiCoO2/SiOx/TiO2/p++-Si two-terminal devices have been fabricated. Analog conductance modulation, via voltage-driven regulation of Li+ ion concentration in the cathode and anode layers, along with current rectification and nanobattery effects are reported. Furthermore, evidence is provided for biorealistic synaptic behavior, manifested as paired pulse facilitation based on the summation of excitatory post-synaptic currents and spike-timing-dependent plasticity, which are governed by the Li+ ion concentration and its relaxation dynamics.

Direct Evidence of Lithium Ion Migration in Resistive Switching of Lithium Cobalt Oxide Nanobatteries.

Lithium cobalt oxide nanobatteries offer exciting prospects in the field of nonvolatile memories and neuromorphic circuits. However, the precise underlying resistive switching (RS) mechanism remains a matter of debate in two-terminal cells. Herein, intriguing results, obtained by secondary ion mass spectroscopy (SIMS) 3D imaging, clearly demonstrate that the RS mechanism corresponds to lithium migration toward the outside of the Lix CoO2 layer. These observations are very well correlated with the observed insulator-to-metal transition of the oxide. Besides, smaller device area experimentally yields much faster switching kinetics, which is qualitatively well accounted for by a simple numerical simulation. Write/erase endurance is also highly improved with downscaling - much further than the present cycling life of usual lithium-ion batteries. Hence very attractive possibilities can be envisaged for this class of materials in nanoelectronics.

Ambiguous Role of Growth-Induced Defects on the Semiconductor-to-Metal Characteristics in Epitaxial VO2/TiO2 Thin Films.

Controlling the semiconductor-to-metal transition temperature in epitaxial VO2 thin films remains an unresolved question both at the fundamental as well as the application level. Within the scope of this work, the effects of growth temperature on the structure, chemical composition, interface coherency and electrical characteristics of rutile VO2 epitaxial thin films grown on TiO2 substrates are investigated. It is hereby deduced that the transition temperature is lower than the bulk value of 340 K. However, it is found to approach this value as a function of increased growth temperature even though it is accompanied by a contraction along the V4+-V4+ bond direction, the crystallographic c-axis lattice parameter. Additionally, it is demonstrated that films grown at low substrate temperatures exhibit a relaxed state and a strongly reduced transition temperature. It is suggested that, besides thermal and epitaxial strain, growth-induced defects may strongly affect the electronic phase transition. The results of this work reveal the difficulty in extracting the intrinsic material response to strain, when the exact contribution of all strain sources cannot be effectively determined. The findings also bear implications on the limitations in obtaining the recently predicted novel semi-Dirac point phase in VO2/TiO2 multilayer structures.

Effect of Silicon Nitride/Oxide on the Structure and the Thermal Conductivity of CoSi Nanocomposites.

In this work, the fabrication of nanocomposites with silicon nitride/oxide into the thermoelectric matrix of cobalt silicide is presented. The different concentrations of nano-Si3N4 were intentionally introduced by mechanical grinding while it was found that the nanocomposites also included SiO2 phase at micro- as well as at nano-scale. The structural and morphological modifications of the materials were studied by powder X-ray Diffraction, Scanning Electron Microscopy and Transmission Electron Microscopy. The nanocomposites were studied in terms of Hall Effect, Seebeck coefficient, electrical and thermal conductivity. Emphasis is given on the lattice thermal conductivity that was analyzed based on Effective Medium Theory and the contribution of each phase is taken into account.

Aerial Oxidation of a V(IV)-Iminopyridine Hydroquinonate Complex: A Trap for the V(IV)-Semiquinonate Radical Intermediate.

The reaction of 2,5-bis[N,N'-bis(2-pyridyl-aminomethyl)aminomethyl]-p-hydroquinone (H2bpymah) with VO(2+) salts in acetonitrile or water at a low pH (2.2-3.5) results in the isolation of [{V(IV)(O)(Cl)}2(µ-bpymah)], the p-semiquinonate complex [{V(IV)(O)(Cl)}2(µ-bpymas)](OH), the cyclic mixed-valent hexanuclear compound [{V(V)(O)(µ-O)V(IV)(O)}(µ-bpymah)]3, and [(V(V)O2)2(µ-bpymah)]. [{V(IV)(O)(Cl)}2(µ-bpymas)](OH) is an intermediate of the radical-mediated oxidation of [{V(IV)(O)(Cl)}2(µ-bpymah)] from O2. At lower pH values (2.2), a reversible intramolecular electron transfer from the metal to the ligand of [{V(IV)(O)(Cl)}2(µ-bpymas)](OH) is induced with the concurrent substitution of chlorine atoms by the oxygen-bridging atoms, resulting in the formation of [{V(V)(O)(µ-O)V(IV)(O)}(µ-bpymah)]3. The metal complexes were fully characterized by X-ray crystallography, infrared (IR) spectroscopy, and magnetic measurements in the solid state, as well as by conductivity measurements, UV-vis spectroscopy, and electrochemical measurements in solution. The oxidation states of the metal ions and ligands were determined by the crystallographic data. The [{V(IV)(O)(Cl)}2(µ-bpymah)]-[{V(IV)(O)(Cl)}2(µ-bpymas)](OH) redox process is electrochemically reversible. The V(IV) ion in the semiquinonate compound exhibits a surprisingly low oxophilicity, resulting in the stabilization of OH(-) counterions at acidic pH values. An investigation of the mechanism of this reaction reveals that these complexes induce the reduction of O2 to H2O2, mimicking the activity of enzymes incorporating two redox-active centers (metal-organic) in the active site.

Synthesis, structure, magnetic properties and aqueous solution characterization of p-hydroquinone and phenol iminodiacetate copper(II) complexes.

The reaction of Cu2+ acetate monohydrate with 2-[N,N'-bis(carboxymethyl)aminomethyl]-4-carboxyphenol (H4cacp), 2-[N,N-bis(carboxymethyl)aminomethyl]hydroquinone (H4cah) and the dinucleating 2,5-bis[N,N-bis(carboxymethyl)aminomethyl]hydroquinone (H6bicah) in water results in the formation of several Cu2+ species, which are in dynamic equilibrium in aqueous solution and their stability is pH dependent. A systematic crystallographic study of these species was pursued, resulting in the characterization of most of the species. Additional techniques were employed to characterize the molecules in the solid state (infrared spectroscopy) and in solution (UV-vis spectroscopy and electrochemistry). These measurements show that the Cu2+ ions are ligated mainly to the iminodiacetate at pH < 6, exhibiting only weak interactions with the phenol oxygen. At pH > 6, the phenol oxygen was deprotonated and dinuclear-bridged species, from the phenolate oxygen complexes exhibiting a Cu2+ 2O2 core, were isolated. The coordination environment around the copper ions varies between trigonal bipyramidal, tetragonal pyramidal and distorted octahedral geometries. The two unpaired electrons of the Cu2+ ions are found to be antiferromagnetically coupled. A survey of the magnetic and structural properties of the dinuclear phenoxide bridged Cu2+ complexes shows that the strength of the antiferromagnetic coupling is linearly dependent on the Cu-Ophenolate bond lengths, at bond distances below 1.98 angstroms. The effect of the Cu-O-Cu angles on the magnetic properties of the complexes is also discussed.

Synthesis, characterization, and study of octanuclear iron-oxo clusters containing a redox-active Fe4O4-cubane core.

A one-pot synthetic procedure yields the octanuclear Fe(III) complexes Fe(8)(micro(4-)O)(4)(micro-pz(*))(12)X(40, where X = Cl and pz(*) = pyrazolate anion (pz = C(3)H(3)N(2)-) (1), 4-Cl-pz (2), and 4-Me-pz (3) or X = Br and pz(*) = pz (4). The crystal structures of complexes 1-4, determined by X-ray diffraction, show an Fe(4)O(4)-cubane core encapsulated in a shell composed of four interwoven Fe(micro-pz(*))(3)X units. Complexes 1-4 have been characterized by 1H NMR, infrared, and Raman spectroscopies. Mössbauer spectroscopic analysis distinguishes the cubane and outer Fe(III) centers by their different isomer shift and quadrupole splitting values. Electrochemical analyses by cyclic voltammetry show four consecutive, closely spaced, reversible reduction processes for each of the four complexes. Magnetic susceptibility studies, corroborated by density functional theory calculations, reveal weak antiferromagnetic coupling among the four cubane Fe centers and strong antiferromagnetic coupling between cubane and outer Fe atoms of 1. The structural similarity between the antiferromagnetic Fe(8)(micro(4-)O)(4) core of 1-4 and the antiferromagnetic units contained in the minerals ferrihydrite and maghemite is demonstrated by X-ray and Mössbauer data.