Microstructure characterization and mechanistic insight into polyether polyols and their associated polyurethanes.

This article reviews the analytical tool chest used for characterizing alkoxylates and their associated copolymer mixtures. Specific emphasis will be placed upon the use of mass spectrometry-based techniques as rapid characterization tools for optimizing reaction processes in an industrial R&D setting. An initial tutorial will cover the use of matrix-assisted laser desorption/ionization-mass spectrometry and tandem mass spectrometry fragmentation for detailed component analysis (e.g., polyol and isocyanate) of a model polyurethane-based foam. Next, this critical feedback information will be used with the guidance of mass spectrometry to initiate the development of a new, more efficient, tris(pentafluorophenyl)borane (FAB) catalyst-based alkoxylation process for generating the next generation of glycerin-initiated poly(propylene oxide)-co-poly(ethylene oxide) copolymers. Examples will be provided for each step in the FAB-based optimization process that were required to generate the final product. Following this example, two-dimensional liquid chromatography, supercritical fluid chromatography, and ion mobility separations, along with their coupling to mass spectrometry, will be reviewed for their efficiency in characterizing and quantitating the components within these complex polyether polyol mixtures.

Dual Polymerization Pathway for Polyolefin-Polar Block Copolymer Synthesis via MILRad: Mechanism and Scope.

This work explores the mechanism whereby a cationic diimine Pd(II) complex combines coordination insertion and radical polymerization to form polyolefin-polar block copolymers. The initial requirement involves the insertion of a single acrylate monomer into the Pd(II)-polyolefin intermediates, which generate a stable polymeric chelate through a chain-walking mechanism. This thermodynamically stable chelate was also found to be photochemically inactive, and a unique mechanism was discovered which allows for radical polymerization. Rate-determining opening of the chelate by an ancillary ligand followed by additional chain walking allows the metal to migrate to the α-carbon of the acrylate moiety. Ultimately, the molecular parameters necessary for blue-light-triggered Pd-C bond homolysis from this α-carbon to form a carbon-centered macroradical species were established. This intermediate is understood to initiate free radical polymerization of acrylic monomers, thereby facilitating block copolymer synthesis from a single Pd(II) complex. Key intermediates were isolated and comprehensively characterized through exhaustive analytical methods which detail the mechanism while confirming the structural integrity of the polyolefin-polar blocks. Chain walking combined with blue-light irradiation functions as the mechanistic switch from coordination insertion to radical polymerization. On the basis of these discoveries, robust di- and triblock copolymer syntheses have been demonstrated with olefins (ethylene and 1-hexene) which produce amorphous or crystalline blocks and acrylics (methyl acrylate, ethyl acrylate, n-butyl acrylate, and methyl methacrylate) in broad molecular weight ranges and compositions, yielding AB diblocks and BAB triblocks.

Polyolefin Analyses with a 10 mm Multinuclear NMR Cryoprobe.

Polyolefins are important and broadly used materials. Their molecular microstructures have direct impact on macroscopic properties and dictate end-use applications. 13C NMR is a powerful analytical technique used to characterize polyolefin microstructures, such as long-chain branching (LCB), but it suffers from low sensitivity. Although the 13C sensitivity of polyolefin samples can be increased by about 5.5 times with a cryoprobe, when compared with a conventional broadband observe (BBO) probe, further sensitivity enhancement is in high demand for studying increasingly complex polyolefin microstructures. Toward this goal, distortionless enhancement by polarization transfer (DEPT) and refocused insensitive nuclei enhanced by polarization transfer (RINEPT) are explored. The use of hard, regular, and new short adiabatic 180° 13C pulses in DEPT and RINEPT is investigated. It is found that RINEPTs perform better than DEPTs and a sensitivity enhancement of 3.1 can be achieved with RINEPTs. The results of RINEPTs are further analyzed with statistics software JMP and recommendations for optimal usage of RINEPTs are suggested. An example of analyzing saturated chain ends in an ethylene-octene copolymer sample with a hard 180° 13C RINEPT pulse is demonstrated. It is shown that the experimental time can be further reduced in half because of faster proton relaxation, where the total experimental time is about 580 times shorter when compared to using a conventional method and a 10 mm BBO probe. A naturally abundant nitrogen-containing polyolefin is analyzed using 1H-15N HMBC and, to our knowledge, is the first 1H-15N HMBC presented in the field of polyolefin characterization. The relative amount of similar nitrogen-containing structures is quantified by two-dimensional integration of 1H-15N HMBC. Two pragmatic technical challenges related to using high-sensitivity NMR cryoprobes are also addressed: (1) A new 1H decoupling sequence Bi_Waltz_65_256pl is proposed to address decoupling artifacts in 13C{1H} NMR spectra which contain a strong 13C signal with a high signal-to-noise ratio (S/N). (2) A simple pulse sequence that affords zero-slope spectral baselines and quantitative results is presented to address acoustic ringing that is often associated with high-sensitivity cryoprobe use.

Characterization of microstructures and reaction mechanisms of Tröger's base polymers of intrinsic microporosity.

RATIONALE: Tröger's base polymers of intrinsic microporosity (PIMs) are receiving increasing attention for applications such as polymer molecular sieve membranes. Development of novel membrane materials requires microstructure analysis in order to overcome processing and applications challenges. This study aims to address these challenges and overcome some of the solubility/aggregation issues that hinder the analysis of these materials. METHODS: A combination of matrix-assisted laser desorption/ionization mass spectrometry and collision-induced dissociation was used to examine the reaction products of unfunctionalized Tröger's base PIMs. RESULTS: Enhanced data mining, using ultrahigh-resolution mass spectrometry and statistical analysis, yielded a wealth of information on the molecular mass, chemical connectivity, and end groups of species generated during synthesis. Modifications of interest include N-methyl, N-methanimine, N-formyl, and N-methylol end-capping moieties, as well as incomplete backbone methanodiazocine rings with missing bridging methylene linkages. Most importantly, a general fragmentation mechanism, supported by computational modeling, was developed to assist in the rapid identification of main-chain and end-group modifications in Tröger's base PIMs. CONCLUSIONS: Unfunctionalized Tröger's base polymers were selected as a model system, to thoroughly study their end-group modification chemistry. This model system could then be used to gain insights into complex hydroxy-functional PIM materials.

MALDI-TOF/TOF CID Study of Poly(1,4-dihydroxybenzene terephthalate) Fragmentation Reactions.

MALDI-TOF/TOF collision-induced dissociation (CID) experiments were conducted on model aromatic polyester oligomers. CID fragmentation studies identified initial fracture of the ester bond and subsequent CO loss as a major pathway, consistent with the general fragmentation mechanism used to explain the origin of poly(p-phenylenediamine terephthalamide) (PPD-T) fragment ions. Specifically, both charge-remote and charge-site fragmentation were observed. Different parent-ion species were observed, the major ones being carboxyl-hydroxyl, di-carboxyl, di-hydroxyl, and phenyl-carboxyl terminated. One species observed was hydroxyl-diethylamine terminated caused by reaction of carboxyl groups with triethylamine added to the synthesis reaction mixture. Fragment ions reflected the end groups of the parent oligomers. Some MALDI fragment-ion spectra were obtained for species showing exchange between Li and H at the carboxyl end group. Bond energy calculations provide further insight into suggested fragmentation mechanisms.

Matrix-assisted laser desorption/ionization-time-of-flight/time-of-flight collision-induced dissociation study of poly(p-phenylenediamine terephthalamide) fragmentation reactions.

MALDI-TOF/TOF collision-induced dissociation (CID) experiments are reported on model poly(p-phenylenediamine terephthalamide) (PPD-T) polymers, revealing a variety of synthesis reaction products. Diamine-terminated oligomers were the major product of synthesis using excess amine, and di-carboxylic acid oligomers were the major product for excess acid. Structures of major reaction products were confirmed by CID fragmentation studies, along with detailed studies of MS/MS decomposition pathways. Apparent fracture of the phenylcarbonyl bond was the major fragmentation pathway (independent of end groups), resulting from initial NHCO bond cleavage with subsequent CO loss. Hydrogen-transfer reactions play an important role in fragmentation, involving both cross-chain abstraction of NH hydrogen and long-range H-transfer. End-group and main-chain modifications produce fingerprint CID fragmentation patterns that can be used to identify end groups and branching patterns; the structure of an unanticipated synthesis product was established using CID. The effect of synthesis conditions on polymer composition was studied using the analysis of variance, specifically, the amine-to-acid ratio used and post-synthesis addition of CaO. Of particular interest is oligomer end-group modification by the solvent (N-methyl pyrrolidone) induced by addition of CaO.

Collision induced dissociation study of ester-based polyurethane fragmentation reactions.

A combination of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) collision induced dissociation (CID) and ion mobility separations (IMS) was used to study a complex mixture composed of unreacted polyester starting material (polybutylene adipate) and polyurethane (PUR) end products. Collision induced dissociation fragmentation identified two primary fragmentation mechanisms of PURs, which were used to generate a general fragmentation model. Predicted fragment ions were used to distinguish: (1) linear and cyclic PURs, (2) hard-block and soft-block PURS, (3) the degree of "blockiness" within hard- and soft-block PURs, (4) the location of the MDI linkages within each PUR chain, and (5) the relative intensities of various isobars intermingled within a precursor mass peak. These results were consistent with the observed IMS separations.

MALDI-TOF MS stability study of model poly(p-phenylene terephthalamide)s.

In the present study, we address the possibility of matrix-assisted laser desorption/ionization (MALDI)-time-of-flight MS analysis-induced chain fragmentation in poly(p-phenylene terephthalamide) (PPD-T) by considering two possible sources: (1) grinding-induced fragmentation resulting from the evaporation-grinding MALDI sample preparation method (E-G method) and (2) in-source/metastable fragmentation induced by the MALDI laser. An analysis of variance (ANOVA) statistical study found, with a high probability, that obtaining MALDI spectra with the effective laser area as large as possible (the "fanned-out" setting) did not cause any chain fragmentation due to the E-G MALDI sample preparation method, even when three additional grinding steps were used. However, the effect of laser fluence was less clear. A significant effect of laser fluence was observed for lower mass oligomers (<1,400 Da), but there was essentially no effect for higher mass species up to our limit of ANOVA measurement (approximately 2,300 Da). Plausible explanations are presented to explain these observations. The most likely scenario is that "unexpected" end-group modifications occur during PPD-T synthesis, producing small quantities of low mass species, which are amplified by the MALDI-EG extraction procedure.

MALDI-TOF/TOF CID study of poly(alpha-methylstyrene) fragmentation reactions.

MALDI-TOF/TOF CID experiments are reported for hydroxylated poly(alpha-methylstyrene) precursor ions (PAMS: m/z 1,445.9 (n = 10), 2,036.3 (n = 15), 2,626.7 (n = 20), 3,217.1 (n = 25), and 3,807.5 (n = 30), where the number of repeat units n corresponds to the oligomer mass numbers). The influences of structure, molecular weight, and kinetic energy on degradation mechanisms were examined to test the generality of our multi-chain fragmentation model developed for polystyrene. Our results indicate that poly(alpha-methylstyrene) free radicals are formed initially through multiple chain breaks and subsequently undergo a variety of depolymerization reactions to yield predominantly monomer and dimer species; the intensity of each species depends on the effective kinetic energy selected for the CID process. Each depolymerization mechanism is presented in detail with experimental and computational data to justify/rationalize the process and its kinetic energy dependence. These processes show the complex interrelationships between the various pathways along with preferred production of tertiary radicals, which suppresses the appearance of primary radicals. Additionally, Py-GC/MS experimental data are presented to allow a comparison of the multimolecular free radical reactions in pyrolysis with the unimolecular fragmentation reactions of MS/MS.

MALDI-TOF/TOF CID study of 4-alkyl-substituted polystyrene fragmentation reactions.

MALDI-TOF/TOF CID experiments were conducted on a variety of hydrogen-terminated poly(4-methylstyrene), hydroxylated poly(t-butylstyrene), and polystyrene precursor ions: n = 10, 15, 20, 25, and 30, where the number of repeat units n corresponds to the oligomer mass number. The influences of structure, molecular weight, and effective collision kinetic energy on degradation mechanisms were examined to test the generality of our multi-chain fragmentation model developed for polystyrene. Each depolymerization mechanism is presented in detail with experimental and computational data to justify/rationalize its occurrence and effective kinetic energy dependence. These processes show the complex interrelationship between the various pathways along with preferred production of secondary radicals, which suppresses the appearance of primary radicals. Additionally, Py-GC/MS experimental data are presented, for comparison of the multimolecular free radical reactions in pyrolysis with the unimolecular fragmentation reactions of MS/MS.

Electrospray mass spectrometry study of tiopronin monolayer-protected gold nanoclusters.

Electrospray ionization time-of-flight mass spectrometry (ESI-TOF MS) and gel permeation chromatography (GPC) were used to study the synthesis of a series of tiopronin monolayer-protected gold nanoclusters (MPCs) and to monitor their postsynthesis peptide ligand place-exchange reactions. All mass spectra identified the presence of cyclic gold(I)-thiolates with a strong preference for tetrameric species. During the synthesis of pre-monolayer-protected nanoclusters (pre-MPCs), esterified gold(I)-thiolate tetramers were initially observed in minor abundance (with respect to disulfide bridged tiopronin species) before dramatically increasing in abundance and precipitating from solution. After conversion of pre-MPCs to MPCs, ESI-TOF mass spectra demonstrated an overall predominance of tetrameric species with conversion from ester-terminated end groups to carboxyl-terminated end groups. Further modifications were performed through postsynthesis ligand place-exchange reactions to validate the existence of the tetramers. This work suggests that monolayer protection is accomplished by cyclized gold(I)-thiolate tetramers on the gold core surface, and/or that gold(I)-thiolates are a basic building block within the nanoparticles.

Universal polyethylene glycol linkers for attaching receptor ligands to quantum dots.

Biologically active small molecule derivatives that can be conjugated to quantum dots have the promise of revolutionizing fluorescent imaging in biology. In order to achieve this several technical hurdles have to be surmounted, one of which is non-specific adsorption of quantum dots to cell membranes. Pegylating quantum dots has been shown to eliminate non-specific binding. Consequently it is necessary to develop a universal synthetic methodology to attach small molecule ligands to polyethylene glycol. These pegylated small molecules may then be conjugated to the surfaces of quantum dots. Ideally this universal strategy should be adaptable and be applicable to PEG chains of varying lengths. This paper describes the development of one such methodology and the synthesis of a pegylated derivative of the known 5HT(2) agonist 1-(2-aminopropyl)-2,5-dimethoxy benzene. This compound was tested and found to be an agonist for the 5HT(2A) and 5HT(2C) receptor having EC(50) values of 250 and 50 nM, respectively.

A MALDI-TOF MS study of oligomeric poly(m-phenyleneisophthalamide).

MALDI-TOF MS was used to study the end-group distribution of a series of poly(m-phenyleneisophthalamide) oligomers which were synthesized using various mole percent ratios of diamine to diacid chloride (90:10, 80:20, 70:30, 60:40, 50:50, 40:60, 30:70, 20:80, and 10:90) to clarify results obtained in previous work published in this journal. Oligomers synthesized with excess diamine or excess diacid chloride were found to contain abundances of amine or carboxylate end groups, respectively, as expected. Oligomers synthesized with equal molar ratios of reactants produced cyclic species which were also found in a previous publication as an oligomer in commercially produced, high molecular mass Nomex.

Characterization, supramolecular assembly, and nanostructures of thiophene dendrimers.

We report the synthesis and characterization of dendritic thiophene derivatives with their unique supramolecular assembly into 2-D crystals, nanowires, and nanoparticle aggregates. The structure and size of the dendrons and dendrimers have been confirmed with various techniques, such as NMR, SEC, and MALDI-TOF-MS. The mass values were consistent with the mass observed by MALDI-TOF-MS, whereas SEC measurements also gave useful information on the hydrodynamic volume of the individual dendrimers. The interesting electrooptical properties were highlighted by very broad absorption spectra and narrower fluorescence consistent with their electrochemical behavior. The self-organization of the dendrimers on the solid substrate is dependent on the nature of the substrate, preparation methods, and the molecule-molecule and molecule-substrate interactions. Thus, 14T-1 and 30T both formed globular aggregates on mica surface, while 14T-1 also formed nanowires on graphite surface. On the other hand, the larger 30T was observed to form 2-D crystalline structures. By varying the alkyl chain length attached to 14T-1, we were also able to obtain 2-D crystals on graphite. This showed that the different symmetry of packing for 30T and 14T-1 is also dependent on several factors, such as the molecular shape, size, and the presence of noncovalent intermolecular interactions. The results demonstrated the unique ability of thiophene dendrimers to form nanostructures on surfaces.

A technique for obtaining matrix-assisted laser desorption/ionization time-of-flight mass spectra of poorly soluble and insoluble aromatic polyamides.

Wet grinding methods for obtaining matrix-assisted laser desorption/ionization time-of-flight mass spectra of poorly soluble and insoluble low molecular mass oligomers (<4600 Da) of Nomex and Kevlar are described. Optimum conditions for sample preparation are given along with a detailed analysis of the spectra obtained. Two matrix materials were employed in this analysis, 1,8-dihydroxyanthrone (dithranol) and 3-aminoquinoline with potassium trifluoroacetate used as the cationizing agent. The spectra obtained in this study are sensitive to the matrix, molar mixing ratios of matrix/polymer/cationizing agent, and the sample preparation method.

Characterization of an insoluble polyimide oligomer by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

In the past two years, papers have appeared in the literature which demonstrate that matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectra can be obtained from matrix-analyte preparations which have been produced by grinding the two materials together until a powder of small particle size is obtained. In the present study that methodology was modified and applied to an insoluble polyimide oligomer, poly(4,4'-oxydiphenylenepyromellitimide) (POPM). Two matrix materials were employed in this analysis, 1,8 dihydroxyanthrone (dithranol) and 3-aminoquinoline, with and without an additional cationizing agent. The spectra obtained by this method are shown to be sensitive to the matrix employed in the analysis as well as the quantity of cationizing agent combined with the matrix.