Phase transition and gelation in cellulose nanocrystal-based aqueous suspensions studied by SANS.

HYPOTHESIS: Aqueous suspensions of cellulose nanocrystals (CNC) form a re-entrant liquid crystal (LC) phase with increasing salinity. Phase separation occurs in this LC state leading to a biphasic gel with a flow programmable structure that can be used to form anisotropic soft materials. We term this state a Liquid Crystal Hydroglass (LCH). Defining the mechanisms by which the LCH forms requires detailed structural analysis at the mesoscopic length scale. EXPERIMENTS: By utilising Small Angle Neutron Scattering (SANS), we investigated the microstructure transitions in CNC suspensions, with a particular focus on the unique LC re-entrancy and gelation into the biphasic LCH. FINDINGS: Scattering from LCH gels comprises contributions from a dispersed liquid state and static heterogeneity, characterised using a Lorentzian-Gaussian model of inhomogeneity. This conceptually supports a gelation mechanism (spinodal decomposition) in CNC suspensions towards a biphasic structure of the LCH. It also demonstrates that, with increasing salinity, the non-monotonic variation in effective volume fraction of CNC rods fundamentally causes the LC re-entrancy. This work provides the first experimental characterisation of the LC-re-entrancy and formation of an anisotropic LCH gel. The proposed mechanism can be extended to understanding the general behaviour of anisotropic colloids.

Snake venom-defined fibrin architecture dictates fibroblast survival and differentiation.

Fibrin is the provisional matrix formed after injury, setting the trajectory for the subsequent stages of wound healing. It is commonly used as a wound sealant and a natural hydrogel for three-dimensional (3D) biophysical studies. However, the traditional thrombin-driven fibrin systems are poorly controlled. Therefore, the precise roles of fibrin's biophysical properties on fibroblast functions, which underlie healing outcomes, are unknown. Here, we establish a snake venom-controlled fibrin system with precisely and independently tuned architectural and mechanical properties. Employing this defined system, we show that fibrin architecture influences fibroblast survival, spreading phenotype, and differentiation. A fine fibrin architecture is a key prerequisite for fibroblast differentiation, while a coarse architecture induces cell loss and disengages fibroblast's sensitivity towards TGF-ß1. Our results demonstrate that snake venom-controlled fibrin can precisely control fibroblast differentiation. Applying these biophysical principles to fibrin sealants has translational significance in regenerative medicine and tissue engineering.

Amorphous packing of amylose and elongated branches linked to the enzymatic resistance of high-amylose wheat starch granules.

To elucidate starch structural features underlying resistant starch formation, wheat starch granules with three (A-, B- and C- type) crystalline polymorphisms and a range of amylose contents were digested in vitro. The changes in multi-level structure of digestion residues were compared. In the residues of A- and C-type starches, the molecular fine structure (distributions of chain length and whole molecular size), as analyzed by size exclusion chromatography (SEC), remained similar during digestion. In contrast, B-type high amylose wheat starch (HAWS) showed distinct changes in multi-level structures of digestion-resistant fractions: (1) the peak of longer amylopectin branches shifted to a lower degree of polymerization (40 DP); (2) production of α-limit dextrin (~2 nm hydrodynamic radius) in the residues; (3) a small increase of double helix content during digestion, in contrast to 6 % reduction for the A-type starch; (4) a decrease (6 °C lower) in the melting temperature of amylose-lipid complexes. The comparison suggests that elongated branches in B-type starch contribute to the formation of resistant fraction (including α-limit dextrin) against α-amylase. The amorphous packing of starch polymers with elongated branches together with the absence of surface pores and channels is proposed to be the basis for the enzymatic resistance of granular HAWS.

Structural Insights into the Mechanism of Heat-Set Gel Formation of Polyisocyanopeptide Polymers.

One of the key factors influencing the mechanical properties of natural and synthetic extracellular matrices (ECM) is how large-scale 3D gel-like structures emerge from the molecular self-assembly of individual polymers. Here, structural characterization using small-angle neutron scattering (SANS) of ECM-mimicking polyisocyanopeptide (PIC) hydrogels are reported as a function of background ions across the Hofmeister series. More specifically, the process of polymer assembly is examined by probing the structural features of the heat-set gels and correlating them with their rheological and micro-mechanical properties. The molecular parameters obtained from SANS clearly show changes in polymer conformation which map onto the temperature-induced changes in rheological and micro-mechanical behavior. The formation of larger structures are linked to the formation of cross-links (or bundles), whilst the onset of their detection in the SANS is putatively linked to their concentration in the gel. These insights provide support for the 'hot-spot' gelation mechanism of PIC heat-set gels. Finally, it is found that formation of cross-links and heat-set gelling properties can be strongly influenced by ions in accordance with Hofmeister series. In practice, these results have significance since ions are inherently present in high concentration during cell culture studies; this may therefore influence the structure of synthetic ECM networks.

PEGylation and surface functionalization of liposomes containing drug nanocrystals for cell-targeted delivery.

Liposomal formulations have important therapeutic applications in anti-cancer treatments but current formulations suffer from serious side effects, high dosage requirements and prolonged treatment. In this study, PEGylated azide-functionalized liposomes containing drug nanocrystals were investigated with the aim of increasing the drug payload and achieving functionalization for targeted delivery. Liposomes were characterized using cryogenic transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS), small and ultra-small angle neutron scattering (SANS/USANS) and small and wide angle X-ray scattering (SAXS/WAXS). Cryo-TEM experiments revealed the dimensions of the nanocrystal-loaded liposomes and the change of shape from spherical to elongated after the formation of nanocrystals. Results from SANS/USANS experiments confirmed the asymmetric particle shape. SAXS/WAXS experiments confirmed that the crystalline drug only occurred in freeze-thawed samples and correlated with a new unidentified polymorphic form of ciprofloxacin. Using a small molecule dye, dibenzocyclooctyne (DBCO)-cy5, specific conjugation between DBCO groups and surface azide groups on the liposomes was confirmed; this indicates the promise of this system for tumour-targeted delivery.

Effect of amyloglucosidase hydrolysis on the multi-scale supramolecular structure of corn starch.

The effects of amyloglucosidase digestion on the multi-scale supramolecular structural changes of native corn starch were examined by ultra-small angle neutron scattering (USANS), small angle X-ray scattering (SAXS), particle sizing, and scanning electron microscopy (SEM). Well-defined and spherical pores were formed upon amyloglucosidase digestion as revealed by SEM. The pore polydispersity was determined using USANS by assuming spherical pore morphology with log-normal distribution. Both USANS and SEM measurements demonstrated that the pores become larger and more polydisperse as the digestion time increased. Moreover, SAXS revealed that the lamellar peak area decreased gradually for both thermally and enzymatically treated starches, indicating partial loss of lamellar organisation. Overall, the results demonstrate structural changes occur on multiple length scales upon enzymatic digestion from granular to lamellar with small-angle scattering demonstrated to provide detailed characterization of the resultant microporous structures.

Adsorption isotherm studies on the interaction between polyphenols and apple cell walls: Effects of variety, heating and drying.

The adsorption capacity of principal phenolic compounds onto cell walls from three apple varieties was investigated. Isothermal adsorption modelled with Langmuir, Freundlich and Redlich-Peterson equations were carried out over a range of concentrations from 0.5 to 30 mM before and after cell walls were subjected to boiling, oven-drying or freeze-drying. The isotherm data were best fitted by the Langmuir model in all cases. Polyphenols selectively adsorbed onto cell walls with maximum binding capacities ranging from 140 to 580 µg/mg cell walls depending on surface charge. Increased pectin in apple cell walls caused a 129%-311% decrease in the adsorption of negatively charged polyphenols, presumably due to electrostatic repulsive forces. Boiling had limited effect on cell wall polysaccharides and polyphenol-cell wall interactions. However, more than twofold reduction in binding capacities of polyphenols was induced after drying by altering the structural (i.e. binding sites) and compositional (i.e. pectin degradation) characteristics of cell walls.

Multi-scale assembly of hydrogels formed by highly branched arabinoxylans from Plantago ovata seed mucilage studied by USANS/SANS and rheology.

The structures of two hydrogels formed by purified brush-like polysaccharides from Plantago ovata seed mucilage have been characterised from the nanometre to micrometre scale by using a combination of SANS and USANS techniques. These two hydrogels have distinctly different melting and rheological properties, but the structure of their gel networks bears striking similarity as revealed by USANS/SANS experiments. Surprisingly, we find that the dramatic changes in the rheological properties induced by temperature or change in the solvent quality are accompanied by a small alteration of the network structure as inferred from scattering curves recorded above melting or in a chaotropic solvent (0.7 M KOD). These results suggest that, in contrast to most gel-forming polysaccharides for which gelation depends on a structural transition, the rheological properties of Plantago ovata mucilage gels are dependent on variations in intermolecular hydrogen bonding. By enzymatically cleaving off terminal arabinose residues from the side chains, we have demonstrated that composition of side-chains has a strong effect on intermolecular interactions, which, in turn, has a profound effect on rheological and structural properties of these unique polysaccharides.

Deuterated phytantriol - A versatile compound for probing material distribution in liquid crystalline lipid phases using neutron scattering.

Phytantriol is an interfacially-active lipid that is chemically robust, non-digestible and forms particles with internal bicontinuous cubic phase structures (cubosomes) when dispersed with non-ionic surfactants at ambient and physiological temperatures. The liquid crystalline internal structure of phytantriol-based cubosomes can be changed to alter the interfacial contact area/topology with the aqueous dispersant to trigger bioactive payload release or to alter the local membrane curvature around bound or embedded proteins. To enable the study of payload distribution, structure and transformation kinetics within phytantriol particles by neutron scattering techniques it is desirable to have access to a deuterated version of this molecule but to date a synthetic route has not been available. The first successful synthesis of phytantriol-d39 is presented here alongside a preliminary physical characterisation of related particle structures when phytantriol-d39 is dispersed using two non-ionic surfactants, Tween® 80 and Pluronic® F127. Synchrotron small angle X-ray scattering (SAXS) was used to confirm that phytantriol-d39-based nanoparticles in D2O form similar liquid crystalline structures to those of their natural isotopic abundance (phytantriol/H2O) counterparts as a function of temperature. Finally, small angle neutron scattering (SANS) with solvent contrast to match out the phytantriol-d39 structuring was used to show that the spatial correlations between the Tween® and Pluronic® non-ionic surfactant molecules are different within dispersed phytantriol-d39 particles with different liquid crystalline structures in D2O. The surfactant molecules in phytantriol-d39/Tween® 80 particles with Im3m cubic structures were found to follow a self-avoiding walk, whereas in phytantriol-d39/Pluronic® F127 particles with Pn3m cubic structures they were found to follow a more rod-like packing arrangement.

Influence of molecular weight on PNIPAM brush modified colloidal silica particles.

The effect of molecular weight and temperature on the phase transition and internal structure of poly(N-isopropylacrylamide) brush modified colloidal silica particles was investigated using dynamic light scattering (DLS) and small angle neutron scattering (SANS) between 15 and 45 °C. Dry particle analysis utilising transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) all confirmed the thickness of the polymer brush shell increased as a function of polymerisation time. Hydrodynamic diameter and electrophoretic mobility results revealed that the brush modified particles transitioned from swollen shells to a collapsed conformation between 15 and 35 °C. The dispersions were electrosterically stabilised over the entire temperature range investigated, with minimal thermal hysteresis recorded. Modelling of the hydrodynamic diameter enabled the calculation of a lower critical solution temperature (LCST) which increased as a function of brush thickness. The internal structure determined via SANS showed a swollen brush at low temperatures (18 and 25 °C) which decayed radially away from the substrate, while a collapsed block-like conformation with 60% polymer volume fraction was present at 40 °C. Radial phase separation was evident at intermediate temperatures (30 and 32.5 °C) with the lower molecular weight sample having a greater volume fraction of polymer in the dense inner region at these temperatures.

Rheological and structural properties of complex arabinoxylans from Plantago ovata seed mucilage under non-gelled conditions.

Two gel-forming arabinoxylan (AX) fractions with very similar linkage composition and molecular weight distributions have been isolated from Plantago ovata seed mucilage. Both isolated fractions have distinct gel properties attributed to differences in intermolecular hydrogen bonding. This study probes the effect of hydrogen bonding on molecular interactions of P. ovata AX fractions under non-gelled conditions achieved using a mild hydrogen bonding inhibitor, 0.2 M KOH. Chain conformation, relaxation dynamics and interactions between AX molecules are investigated using a combination of rheological techniques and small angle X-ray and neutron scattering. The scattering data confirm similar molecular dimensions and chain rigidity for both fractions, while showing distinct patterns of molecular interactions which result in the formation of a self-associated polymer network. The relationship between molecular associations, chain relaxation time and entanglement behaviour of P. ovata AX solutions are corroborated though the analysis of flow profiles and small amplitude oscillatory shear rheology.

The Curious Case of the OZ439 Mesylate Salt: An Amphiphilic Antimalarial Drug with Diverse Solution and Solid State Structures.

Efforts to develop orally administered drugs tend to place an exceptional focus on aqueous solubility as this is an essential criterion for their absorption in the gastrointestinal tract. In this work we examine the solid state behavior and solubility of OZ439, a promising single-dose cure for malaria being developed as the highly water-soluble mesylate salt. The aqueous phase behavior of the OZ439 mesylate salt was determined using a combination of small angle neutron and X-ray scattering (SANS and SAXS, respectively). It was found that this salt has low solubility at low concentrations with the drug largely precipitated in free base aggregates. However, with increasing concentration these crystalline aggregates were observed to dissociate into cationic micelles and lamellar phases, effectively increasing the dissolved drug concentration. It was also found that the dissolved OZ439 spontaneously precipitated in the presence of biologically relevant anions, which we attribute to the high lattice energies of most of the salt forms of the drug. These findings show that aqueous solubility is not always what it seems in the context of amphiphilic drug molecules and highlights that its use as the principal metric in selecting drug candidates for development can be perilous.

Relating Structure to Efficiency in Surfactant-Free Polymer/Fullerene Nanoparticle-Based Organic Solar Cells.

Nanoparticle dispersions open up an ecofriendly route toward printable organic solar cells. They can be formed from a variety of organic semiconductors by using miniemulsions that employ surfactants to stabilize the nanoparticles in dispersion and to prevent aggregation. However, whenever surfactant-based nanoparticle dispersions have been used to fabricate solar cells, the reported performances remain moderate. In contrast, solar cells from nanoparticle dispersions formed by precipitation (without surfactants) can exhibit power conversion efficiencies close to those of state-of-the-art solar cells processed from blend solutions using chlorinated solvents. In this work, we use small-angle neutron scattering measurements and transient absorption spectroscopy to investigate why surfactant-free nanoparticles give rise to efficient organic solar cells. We show that surfactant-free nanoparticles comprise a uniform distribution of small semiconductor domains, similar to that of bulk-heterojunction films formed using traditional solvent processing. This observation differs from surfactant-based miniemulsion nanoparticles that typically exhibit core-shell structures. Hence, the surfactant-free nanoparticles already possess the optimum morphology for efficient energy conversion before they are assembled into the photoactive layer of a solar cell. This structural property underpins the superior performance of the solar cells containing surfactant-free nanoparticles and is an important design criterion for future nanoparticle inks.

Structure of cellulose microfibrils in mature cotton fibres.

The structure of cellulose microfibrils in mature cotton fibres from three varieties - Gossypium hirsutum, G. barbadense and G. arboreum - has been investigated by a multi-technique approach combining small angle scattering techniques with spectroscopy and diffraction. Cellulose microfibrils present a Iß-rich crystalline structure with limited surface disorder. Small angle scattering (SAXS and SANS) data have been successfully fitted using a core-shell model and the results obtained indicate that the cellulose microfibrils, formed by the association of 2-3 elementary fibrils, are composed of a ca. 2nm impermeable crystalline core, surrounded by a partially hydrated paracrystalline shell, with overall cross-sections of ca. 3.6-4.7nm. Different low levels of cell wall matrix components have a strong impact on the microfibril architecture and enable moisture penetration upon hydration. Furthermore, the higher amounts of non-cellulosic components in G. barbadense result in a less dense packing of cellulose microfibrils and increased solvent accessibility.

Skyrmion lattice structural transition in MnSi.

Magnetic skyrmions exhibit particle-like properties owing to the topology of their swirling spin texture, providing opportunities to study crystallization of topological particles. However, they mostly end up with a triangular lattice, and thus, the packing degree of freedom in the skyrmion particles has been overlooked so far. We report a structural transition of the skyrmion lattice in MnSi. By use of small-angle neutron scattering, we explore a metastable skyrmion state spreading over a wide temperature and magnetic field region, after thermal quenching. The quenched skyrmions undergo a triangular-to-square lattice transition with decreasing magnetic field at low temperatures. Our study suggests that various skyrmion lattices can emerge at low temperatures, where the skyrmions exhibit distinct topological nature and high sensitivity to the local magnetic anisotropy arising from the underlying chemical lattice.

Neutron scattering shows a droplet of oleic acid at the center of the BAMLET complex.

The anti-cancer complex, Bovine Alpha-lactalbumin Made LEthal to Tumors (BAMLET), has intriguing broad-spectrum anti-cancer activity. Although aspects of BAMLET's anti-cancer mechanism are still not known, it is understood that it involves the oleic acid or oleate component of BAMLET being preferentially released into cancer cell membranes leading to increased membrane permeability and lysis. The structure of the protein component of BAMLET has previously been elucidated by small angle X-ray scattering (SAXS) to be partially unfolded and dramatically enlarged. However, the structure of the oleic acid component of BAMLET and its disposition with respect to the protein component was not revealed as oleic acid has the same X-ray scattering length density (SLD) as water. Employing the difference in the neutron SLDs of hydrogen and deuterium, we carried out solvent contrast variation small angle neutron scattering (SANS) experiments of hydrogenated BAMLET in deuterated water buffers, to reveal the size, shape, and disposition of the oleic acid component of BAMLET. Our resulting analysis and models generated from SANS and SAXS data indicate that oleic acid forms a spherical droplet of oil incompletely encapsulated by the partially unfolded protein component. This model provides insight into the anti-cancer mechanism of this cache of lipid. The model also reveals a protein component "tail" not associated with the oleic acid component that is able to interact with the tail of other BAMLET molecules, providing a plausible explanation of how BAMLET readily forms aggregates. Proteins 2017; 85:1371-1378. © 2017 Wiley Periodicals, Inc.

Cellulose-pectin composite hydrogels: Intermolecular interactions and material properties depend on order of assembly.

Plant cell walls have a unique combination of strength and flexibility however, further investigations are required to understand how those properties arise from the assembly of the relevant biopolymers. Recent studies indicate that Ca2+-pectates can act as load-bearing components in cell walls. To investigate this proposed role of pectins, bioinspired wall models were synthesised based on bacterial cellulose containing pectin-calcium gels by varying the order of assembly of cellulose/pectin networks, pectin degree of methylesterification and calcium concentration. Hydrogels in which pectin-calcium assembly occurred prior to cellulose synthesis showed evidence for direct cellulose/pectin interactions from small-angle scattering (SAXS and SANS), had the densest networks and the lowest normal stress. The strength of the pectin-calcium gel affected cellulose structure, crystallinity and material properties. The results highlight the importance of the order of assembly on the properties of cellulose composite networks and support the role of pectin in the mechanics of cell walls.

Pectin impacts cellulose fibre architecture and hydrogel mechanics in the absence of calcium.

Pectin is a major polysaccharide in many plant cell walls and recent advances indicate that its role in wall mechanics is more important than previously thought. In this work cellulose hydrogels were synthesised in pectin solutions, as a biomimetic tool to investigate the influence of pectin on cellulose assembly and hydrogel mechanical properties. Most of the pectin (60-80%) did not interact at the molecular level with cellulose, as judged by small angle scattering techniques (SAXS and SANS). Despite the lack of strong interactions with cellulose, this pectin fraction impacted the mechanical properties of the hydrogels through poroelastic effects. The other 20-40% of pectin (containing neutral sugar sidechains) was able to interact intimately with cellulose microfibrils at the point of assembly. These results support the need to revise the role of pectin in cell wall architecture and mechanics, and; furthermore they assist the design of cellulose-based products through controlling the viscoelasticity of the fluid phase.

Multiple magnetic scattering in small-angle neutron scattering of Nd-Fe-B nanocrystalline magnet.

We have investigated the influence of multiple scattering on the magnetic small-angle neutron scattering (SANS) from a Nd-Fe-B nanocrystalline magnet. We performed sample-thickness- and neutron-wavelength-dependent SANS measurements, and observed the scattering vector dependence of the multiple magnetic scattering. It is revealed that significant multiple scattering exists in the magnetic scattering rather than the nuclear scattering of Nd-Fe-B nanocrystalline magnet. It is considered that the mean free path of the neutrons for magnetic scattering is rather short in Nd-Fe-B magnets. We analysed the SANS data by the phenomenological magnetic correlation model considering the magnetic microstructures and obtained the microstructural parameters.

Multi-scale model for the hierarchical architecture of native cellulose hydrogels.

The structure of protiated and deuterated cellulose hydrogels has been investigated using a multi-technique approach combining small-angle scattering with diffraction, spectroscopy and microscopy. A model for the multi-scale structure of native cellulose hydrogels is proposed which highlights the essential role of water at different structural levels characterised by: (i) the existence of cellulose microfibrils containing an impermeable crystalline core surrounded by a partially hydrated paracrystalline shell, (ii) the creation of a strong network of cellulose microfibrils held together by hydrogen bonding to form cellulose ribbons and (iii) the differential behaviour of tightly bound water held within the ribbons compared to bulk solvent. Deuterium labelling provides an effective platform on which to further investigate the role of different plant cell wall polysaccharides in cellulose composite formation through the production of selectively deuterated cellulose composite hydrogels.