Preliminary insights about the treatment of contaminated marine sediments by means of bioslurry reactor: Process evaluation and microbiological characterization.

Contaminated marine sediments represent a critical threat towards human health and ecosystems, since they constitute a potential reservoir of toxic compounds release. In the present study, a bioslurry reactor was studied for the treatment of real marine sediments contaminated by petroleum hydrocarbons. The experimental campaign was divided in two periods: in the first period, microcosm trials were carried out to achieve useful indicators for biological hydrocarbon removal from sediments. The microcosm trials highlighted that the inoculum of halotolerant allochthonous bacteria provided the highest performance followed by autochthonous biomass. Based on the achieved results, in the second experimental period a bioslurry reactor was started up, based on a semisolid stirred tank reactor (STR) operated in batch mode. The process performances have been evaluated in terms of total petroleum hydrocarbon (TPH) removal, coupled with the characterization of microbial community through a Next Generation Sequencing (NGS) and phytotoxicity tests through the Germination Index (GI) with Lepidium Sativum seeds. The achieved results showed good hydrocarbons removal, equal to 40%, with a maximum removal rate of 220 mgTPH kg-1 d-1, but highlighting that high contaminant concentrations might affect negatively the overall removal performance. In general, the observed results were encouraging towards the feasibility of biological treatment of marine sediments contaminated by hydrocarbons. The microbiological analysis allowed the identification of taxa most involved in the degradation of TPH, highlighting after the treatment a shift in the microbial community from that of the raw sediment.

Remediation of petrol hydrocarbon-contaminated marine sediments by thermal desorption.

In this study, a hydrocarbon-contaminated marine sediment was treated applying ex-situ thermal desorption (ESTD) at bench-scale. Temperatures up to 280 °C and heating times (t) in the 5-30 min range were investigated. Results revealed that temperatures in the range 200-280 °C led to Total Petrol Hydrocarbon (TPH)-removal efficiency (RE) from 75 to 85% (t = 10 min). The maximum RE of 89% was obtained at 200 °C for 30 min. However, a shorter remediation time of 5 min (or lower temperatures of 160 and 180 °C with longer times) is needed to reach the TPH standard limit. Data also demonstrated the selectivity of the treatment in TPH fraction removal. The modelling of the TPH removal kinetics and desorption isotherm jointly with activation energy calculation (>30 kJ mol-1) indicated that ESTD process is quite unfavorable for marine sediments. This is due to the fact that ESTD is regulated by chemisorption processes and occurred in two distinct TPH removal phases: evaporation and boiling vaporization. This depends on the strong affinity of the TPH with the fine sediment particles, as well as on the high initial water, salinity, organic matter and sulfides content. However, the comparison between alternative processes has shown that ESTD is the most feasible treatment process for TPH-contaminated marine sediment remediation. Obtained results also add relevant information that can be used as a basis for future scaling-up investigations of ESTD for hydrocarbon-contaminated marine sediments.

Performance of membrane bioreactor (MBR) systems for the treatment of shipboard slops: Assessment of hydrocarbon biodegradation and biomass activity under salinity variation.

In order to prevent hydrocarbon discharge at sea from ships, the International Maritime Organization (IMO) enacted the MARPOL 73/78 convention in which any oil and oil residue discharged in wastewater streams must contain less than 5 ppm hydrocarbons. Effective treatment of this petroleum-contaminated water is essential prior to its release into the environment, in order to prevent pollution problem for marine ecosystems as well as for human health. Therefore, two bench scale membrane bioreactors (MBRs) were investigated for hydrocarbon biodegradation. The two plants were initially fed with synthetic wastewater characterised by an increasing salinity, in order to enhance biomass acclimation to salinity. Subsequently, they were fed with a mixture of synthetic wastewater and real shipboard slops (with an increasing slops percentage up to 50% by volume). The results indicated a satisfactory biomass acclimation level in both plants with regards to salinity, providing significant removal efficiencies. The real slops exerted an inhibitory effect on the biomass, partially due to hydrocarbons as well as to other concomitant influences from other compounds contained in the real slops difficult to evaluate a priori. Nevertheless, a slight adaptation of the biomass to the new conditions was observed, with increasing removal efficiencies, despite the significant slops percentage.