Spontaneous symmetry breaking in polar fluids.

Spontaneous symmetry breaking and emergent polar order are each of fundamental importance to a range of scientific disciplines, as well as generating rich phase behaviour in liquid crystals (LCs). Here, we show the union of these phenomena to lead to two previously undiscovered polar liquid states of matter. Both phases have a lamellar structure with an inherent polar ordering of their constituent molecules. The first of these phases is characterised by polar order and a local tilted structure; the tilt direction processes about a helix orthogonal to the layer normal, the period of which is such that we observe selective reflection of light. The second new phase type is anti-ferroelectric, with the constituent molecules aligning orthogonally to the layer normal. This has led us to term the phases the Sm C P H and SmAAF phases, respectively. Further to this, we obtain room temperature ferroelectric nematic (NF) and Sm C P H phases via binary mixture formulation of the novel materials described here with a standard NF compound (DIO), with the resultant materials having melting points (and/or glass transitions) which are significantly below ambient temperature. The new soft matter phase types discovered herein can be considered as electrical analogues of topological structures of magnetic spins in hard matter.

Toward Monodomain Nematic Liquid Crystal Elastomers of Arbitrary Thickness through PET-RAFT Polymerization.

Liquid crystal elastomers (LCEs) are polymeric materials that are proposed for a range of applications. However, to reach their full potential, it is desirable to have as much flexibility as possible in terms of the sample dimensions, while maintaining well-defined alignment. In this work, photoinduced electron/energy transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization is applied to the synthesis of LCEs for the first time. An initial LCE layer (∼100 µm thickness) is partially cured before a second layer of the precursor mixture is added. The curing reaction is then resumed and is observed by FTIR to complete within 15 min of irradiation, yielding samples of increased thickness. Monodomain samples that exhibit an auxetic response and are of thickness 250-300 µm are consistently achieved. All samples are characterized thermally, mechanically, and in terms of their order parameters. The LCEs have physical properties comparable to those of analogous LCEs produced via free-radical polymerization.

Controlling the Optical Properties of Transparent Auxetic Liquid Crystal Elastomers.

Determining the tunability of the optical coefficients, order parameter, and transition temperatures in optically transparent auxetic liquid crystal elastomers (LCEs) is vital for applications, including impact-resistant glass laminates. Here, we report measurements of the refractive indices, order parameters, and transition temperatures in a family of acrylate-based LCEs in which the mesogenic content varies from ∼50 to ∼85%. Modifications in the precursor mixture allow the order parameter, ⟨P2⟩, of the LCE to be adjusted from 0.46 to 0.73. The extraordinary refractive index changes most significantly with composition, from ∼1.66 to ∼1.69, in moving from a low to high mesogenic content. We demonstrate that all LCE refractive indices decrease with increasing temperature, with temperature coefficients of ∼10-4 K-1, comparable to optical plastics. In these LCEs, the average refractive index and the refractive index anisotropy are tunable via both chemical composition and order parameter control; we report design rules for both.

A wireless fluorescent flexible force sensor based on aggregation-induced emission doped liquid crystal elastomers.

Flexible strain sensors have drawn a lot of interest in various applications including human mobility tracking, rehabilitation/personalized health monitoring, and human-machine interaction, but suffer from interference of electromagnetic (EM). To overcome the EM interference, flexible force sensors without sensitive electronic elements have been developed, with drawbacks of bulky modules that hinders their applications in remote measurement with power-free environment. Therefore, it is highly desirable to fabricate a compact wireless flexible force sensor but it is still a challenge. Here, we demonstrate a fluorescent flexible force sensor based on aggregation-induced emission (AIE) doped liquid crystal elastomer (LCE) experimentally. The proposed force sensor film can be used to measure force through the variation of fluorescent intensity induced by the extension or contraction of LCE film, which leads to reduce or increase of the aggregation degree of AIE molecules within. This compact wireless force sensor features lightweight, low-cost, high flexibility, passivity and anti-EM interference, which also enables the naked eye observation. The proposed sensor provides inspiration and a platform for a new concept of non-contact detection, showing application potential in human-friendly interactive electronics and remote-control integration platform.

Room-temperature ferroelectric nematic liquid crystal showing a large and diverging density.

The ferroelectric nematic phase (NF) is a recently discovered phase of matter in which the orientational order of the conventional nematic liquid crystal state is augmented with polar order. Atomistic simulations suggest that the polar NF phase would be denser than conventional nematics owing to contributions from polar order. Using an oscillating U-tube densitometer, we obtain detailed temperature-dependent density values for a selection of conventional liquid crystals with excellent agreement with earlier reports. Having demonstrated the validity of our method, we then record density as a function of temperature for M5, a novel room-temperature ferroelectric nematic material. We present the first experimental density data for a NF material as well as density data for a nematic that has not previously been reported. We find that the room-temperature NF material shows a large (>1.3 g cm-3) density at all temperatures studied, notably including phases without polar order. An increase in density at phase transitions is observed. The magnitude of the increase for the intermediate-to-ferroelectric nematic (NX-NF) transition is an order of magnitude smaller than the isotropic-nematic (I-N) transition. We then probe potential consequences that may result from an elevated density through measurement of the refractive indices (no and ne). The navg of M5 is compared with 5CB and polar smectic liquid crystals. We observe how the highly polar nature of the system counteracts the effects of an increase in density. With knowledge of experimental density, we are able to derive an approximation that yields the polar order parameter, 〈P1〉, from polarisation measurements. Present results may be typical of ferroelectric nematic materials, potentially guiding material development, and is especially relevant for informing ongoing studies into this emerging class of materials.

Ultra-stable liquid crystal droplets coated by sustainable plant-based materials for optical sensing of chemical and biological analytes.

Herein, we demonstrate for the first time the synthesis of ultra-stable, spherical, nematic liquid crystal (LC) droplets of narrow size polydispersity coated by sustainable, biodegradable, plant-based materials that trigger a typical bipolar-to-radial configurational transition in dynamic response to chemical and biological analytes. Specifically, a highly soluble polymer, potato protein (PoP) and a physically-crosslinked potato protein microgel (PoPM) of ∼100 nm in diameter, prepared from the PoP, a byproduct of the starch industry, were compared for their ability to coat LC droplets. Although both PoP and PoPM were capable of reducing the interfacial tension between water and n-tetradecane <30 mN m-1, PoPM-coated LC droplets showed better stability than the PoP-coated droplets via a Pickering-like mechanism. Strikingly, the Pickering LC droplets outperformed PoP-stabilized droplets in terms of dynamic response with 5× lower detection limit to model chemical analytes (sodium dodecyl sulphate, SDS) due to the difference in SDS-binding features between the protein and the microgel. To eliminate the effect of size polydispersity on the response, monodisperse Pickering LC droplets of diameter ∼16 µm were additionally obtained using microfluidics, which mirrored the response to chemical as well as biological analytes, i.e., primary bile acid, an important biomarker of liver diseases. We demonstrate that these eco-friendly microgels used for creating monodisperse, ultra-stable, LC complex colloids are powerful templates for fabricating next generation, sustainable optical sensors for early diagnosis in clinical settings and other sensing applications.

Light-Driven Dynamic Hierarchical Architecture of Three-Dimensional Self-Assembled Cholesteric Liquid Crystal Droplets.

Cholesteric liquid crystals have attracted much attention in biosensors, in communication systems, security identification, hierarchical materials assembly, and microlasers, due to their complex and interesting structures accompanied by particular optical properties making them low-cost, label-free and sensitive. However, the reports of CLC droplets with stable topological configurations are still very limited, which hinders the fast development and broad application of CLC droplet-based devices. In this paper, we manifest light-driven changes in the topological configuration of cholesteric liquid crystals droplets, examined experimentally. Photoresponsive azo-LC doped CLC droplets were manipulated by irradiation by UV light to form novel topological configurations with stable 3D structures. The phenomenon behind the configuration changes is the light-induced cholesteric-isotropic phase transition that takes place in liquid crystals. Several topological configurations of CLC droplets have been demonstrated such as closed-ring structures with cone-shaped centers and concentric elliptical centers, and open-ring structures formed under unidirectional illumination of UV light. Structures with parallel CLC pitch lines at the center and with a central point singularity are also formed under multidirectional illumination. The competition of the elastic energy and surface energy of the CLC droplets results in the formation of the new topological configurations. All proposed configurations are stable and controllable by light, which enable CLC droplets with novel topological structures with new characteristics and provide a lot of potential applications in biosensors and microlasers.

A mathematical model for the auxetic response of liquid crystal elastomers.

We develop a mathematical model that builds on the surprising nonlinear mechanical response observed in recent experiments on nematic liquid crystal elastomers. Namely, under uniaxial tensile loads, the material, rather than thinning in the perpendicular directions, becomes thicker in one direction for a sufficiently large strain, while its volume remains unchanged. Motivated by this unusual large-strain auxetic behaviour, we model the material using an Ogden-type strain-energy function and calibrate its parameters to available datasets. We show that Ogden strain-energy functions are particularly suitable for modelling nematic elastomers because of their mathematical simplicity and their clear formulation in terms of the principal stretches, which have a direct kinematic interpretation. This article is part of the theme issue 'The Ogden model of rubber mechanics: Fifty years of impact on nonlinear elasticity'.

Chiral nematic liquid crystal droplets as a basis for sensor systems.

For a series of phospholipid coated calamitic nematic liquid crystal droplets (5CB, 6CB, 7CB, E7 and MLC7023) of diameter ∼18 µm, the addition of chiral dopant leaves the sign of surface anchoring unchanged. Herein we report that for these chiral nematic droplets an analyte induced transition from a Frank-Pryce structure (with planar anchoring) to a nested-cup structure (with perpendicular anchoring) is accompanied by changes in the intensity of reflected light. We propose this system as both a general scheme for understanding director fields in chiral nematic liquid crystal droplets with perpendicular anchoring and as an ideal candidate to be utilised as the basis for developing cheap, single use LC-based sensor devices.

Direct Observation of Biaxial Nematic Order in Auxetic Liquid Crystal Elastomers.

Auxetic materials exhibit a negative Poisson's ratio, i.e., they become thicker rather than thinner in at least one dimension when strained. Recently, a nematic liquid crystal elastomer (LCE) was shown to be the first synthetic auxetic material at a molecular level. Understanding the mechanism of the auxetic response in LCEs is clearly important, and it has been suggested through detailed Raman scattering studies that it is related to the reduction of uniaxial order and emergence of biaxial order on strain. In this paper, we demonstrate direct observation of the biaxial order in an auxetic LCE under strain. We fabricated ~100 µm thick LCE strips with complementary geometries, exhibiting either planar or homeotropic alignment, in which the auxetic response is seen in the thickness or width of the sample, respectively. Polarized Raman scattering measurements on the planar sample show directly the reduction in the uniaxial order parameters on strain and suggest the emergence of biaxial order to mediate the auxetic response in the sample thickness. The homeotropic sample is studied via conoscopy, allowing direct observation of both the auxetic response in the width of the sample and increasing biaxiality in the LCE as it is strained. We verified that the mechanism of the auxetic response in auxetic LCEs is due to the emergence of the biaxial order and conclude such materials can be added to the small number of biaxial nematic systems that have been observed. Importantly, we also show that the mechanical Frèedericksz transition seen in some LCEs is consistent with a strain-induced transition from an optically positive to an optically negative biaxial system under strain, rather than a director rotation in a uniaxial system.

Influence of Liquid Crystallinity and Mechanical Deformation on the Molecular Relaxations of an Auxetic Liquid Crystal Elastomer.

Liquid Crystal Elastomers (LCEs) combine the anisotropic ordering of liquid crystals with the elastic properties of elastomers, providing unique physical properties, such as stimuli responsiveness and a recently discovered molecular auxetic response. Here, we determine how the molecular relaxation dynamics in an acrylate LCE are affected by its phase using broadband dielectric relaxation spectroscopy, calorimetry and rheology. Our LCE is an excellent model system since it exhibits a molecular auxetic response in its nematic state, and chemically identical nematic or isotropic samples can be prepared by cross-linking. We find that the glass transition temperatures (Tg) and dynamic fragilities are similar in both phases, and the T-dependence of the α relaxation shows a crossover at the same T* for both phases. However, for T>T*, the behavior becomes Arrhenius for the nematic LCE, but only more Arrhenius-like for the isotropic sample. We provide evidence that the latter behavior is related to the existence of pre-transitional nematic fluctuations in the isotropic LCE, which are locked in by polymerization. The role of applied strain on the relaxation dynamics and mechanical response of the LCE is investigated; this is particularly important since the molecular auxetic response is linked to a mechanical Fréedericksz transition that is not fully understood. We demonstrate that the complex Young's modulus and the α relaxation time remain relatively unchanged for small deformations, whereas for strains for which the auxetic response is achieved, significant increases are observed. We suggest that the observed molecular auxetic response is coupled to the strain-induced out-of-plane rotation of the mesogen units, in turn driven by the increasing constraints on polymer configurations, as reflected in increasing elastic moduli and α relaxation times; this is consistent with our recent results showing that the auxetic response coincides with the emergence of biaxial order.

A Fluorescence Sensor for Pb2+ Detection Based on Liquid Crystals and Aggregation-Induced Emission Luminogens.

Heavy metals, such as lead ions, are regarded as the main environmental contaminants and have a negative impact on human bodies, making detection technologies of lead ions critical. However, most existing detection methods suffer from time consumption, complicated sample pretreatment, and expensive equipment, which hinder their broad use in real-time detection. Herein, we show a new fluorescence sensor for detecting lead ions derived from liquid crystals doped with an aggregation-induced emission luminogen. The mechanism is based on the variation of fluorescence intensity caused by the disturbance of an ordered liquid crystal configuration in the presence of Pb2+, induced by DNAzyme and its catalytic cleavage. The proposed fluorescence sensor exhibits a low detection limit of 0.65 nM, which is 2 orders of magnitude lower than that previously reported in an optical sensor based on liquid crystals. The detection range of the Pb2+ fluorescence sensor is broad, from 20 nM to 100 µM, and it also selects lead ions from numerous metal ions exactly, resulting in a highly sensitive, highly selective, simple, and low-cost detection strategy of Pb2+ with potential applications in chemical and biological fields. This approach to designing a liquid crystal fluorescence sensor offers an inspiring stage for detecting biomacromolecules or other heavy metal ions by varying decorated molecules.

Liquid Crystal Elastomers for Biological Applications.

The term liquid crystal elastomer (LCE) describes a class of materials that combine the elastic entropy behaviour associated with conventional elastomers with the stimuli responsive properties of anisotropic liquid crystals. LCEs consequently exhibit attributes of both elastomers and liquid crystals, but additionally have unique properties not found in either. Recent developments in LCE synthesis, as well as the understanding of the behaviour of liquid crystal elastomers-namely their mechanical, optical and responsive properties-is of significant relevance to biology and biomedicine. LCEs are abundant in nature, highlighting the potential use of LCEs in biomimetics. Their exceptional tensile properties and biocompatibility have led to research exploring their applications in artificial tissue, biological sensors and cell scaffolds by exploiting their actuation and shock absorption properties. There has also been significant recent interest in using LCEs as a model for morphogenesis. This review provides an overview of some aspects of LCEs which are of relevance in different branches of biology and biomedicine, as well as discussing how recent LCE advances could impact future applications.

Production of giant unilamellar vesicles and encapsulation of lyotropic nematic liquid crystals.

We describe a modified microfluidic method for making Giant Unilamellar Vesicles (GUVs) via water/octanol-lipid/water double emulsion droplets. At a high enough lipid concentration we show that the de-wetting of the octanol from these droplets occurs spontaneously (off-chip) without the need to use shear to aid the de-wetting process. The resultant mixture of octanol droplets and GUVs can be separated by making use of the buoyancy of the octanol. A simpler microfluidic device and pump system can be employed and, because of the higher flow-rates and much higher rate of formation of the double emulsion droplets (∼1500 s-1 compared to up to ∼75 s-1), it is easier to make larger numbers of GUVs and larger volumes of solution. Because of the potential for using GUVs that incorporate lyotropic nematic liquid crystals in biosensors we have used this method to make GUVs that incorporate the nematic phases of sunset yellow and disodium chromoglycate. However, the phase behaviour of these lyotropic liquid crystals is quite sensitive to concentration and we found that there is an unexpected spread in the concentration of the contents of the GUVs obtained.

Protein Microgel-Stabilized Pickering Liquid Crystal Emulsions Undergo Analyte-Triggered Configurational Transition.

Herein, we report a novel approach that involves Pickering stabilization of micometer-sized liquid crystal (LC) droplets with biocompatible soft materials such as a whey protein microgel (WPM) to facilitate the analysis of analyte-induced configurational transition of the LC droplets. The WPM particles were able to irreversibly adsorb at the LC-water interface, and the resulting WPM-stabilized LC droplets possessed a remarkable stability against coalescence over time. Although the LC droplets were successfully protected by a continuous network of the WPM layer, the LC-water interface was still accessible for small molecules such as sodium dodecyl sulfate (SDS) that could diffuse through the meshes of the adsorbed WPM network or through the interfacial pores and induce an LC response. This approach was exploited to investigate the dynamic range of the WPM-stabilized LC droplet response to SDS. Nevertheless, the presence of the unadsorbed WPM in the aqueous medium reduced the access of SDS molecules to the LC droplets, thus suppressing the configuration transition. An improved LC response to SDS with a lower detection limit was achieved after washing off the unadsorbed WPM. Interestingly, the LC exhibited a detection limit as low as ∼0.85 mM for SDS within the initial WPM concentration ranging from 0.005 to 0.1 wt %. Furthermore, we demonstrate that the dose-response behavior was strongly influenced by the number of droplets exposed to the aqueous analytes and the type of surfactants such as anionic SDS, cationic dodecyltrimethylammonium bromide (DTAB), and nonionic tetra(ethylene glycol)monododecyl ether (C12E4). Thus, our results address key issues associated with the quantification of aqueous analytes and provide a promising colloidal platform toward the development of new classes of biocompatible LC droplet-based optical sensors.

Control of Director Fields in Phospholipid-Coated Liquid Crystal Droplets.

In liquid crystal (LC) droplets, small changes in surface anchoring energy can produce large changes in the director field which result in readily detectable optical effects. This makes them attractive for use as biosensors. Coating LC droplets with a phospholipid monolayer provides a bridge between the hydrophobic world of LCs and the water-based world of biology and makes it possible to incorporate naturally occurring biosensor systems. However, phospholipids promote strong perpendicular (homeotropic) anchoring that can inhibit switching of the director field. We show that the tendency for phospholipid layers to promote perpendicular anchoring can be suppressed by using synthetic phospholipids in which the acyl chains are terminated with bulky tert-butyl or ferrocenyl groups; the larger these end-group(s), the less likely the system is to be perpendicular/radial. Additionally, the droplet director field is found to be dependent on the nature of the LC, particularly its intrinsic surface properties, but not (apparently) on the sign of the dielectric anisotropy, the proximity to the melting/isotropic phase transition, the surface tension (in air), or the values of the Frank elastic constants.

Textile materials inspired by structural colour in nature.

The concept of mimicking structural colour in nature as an alternative to traditional textile coloration techniques would reduce dependency on dyes, pigments and vast quantities of water in the textile supply chain. Structural colours originate from the physical interaction of light with nanoscale structures. This is exhibited in the bodies and wings of certain species of butterfly, beetles and plants. The angular optical effects of the Chrysina gloriosa beetle result from the periodicity due to the cholesteric liquid crystal (CLC) structure adopted by the cells in their exoskeleton. The optical properties of CLCs makes promising applications for optical sensors and anti-counterfeit materials. Application using inkjet printing technology enables designs to be tuned to meet product requirements, and with a hydrophobic treatment challenges associated with a rough surface such as textiles are overcome. Here we report inkjet printing CLC solutions onto hydrophobic pre-treated textiles. CIE L*a*b* values demonstrate the resultant colourful films display a greater degree of colour compared to those on untreated textiles.

Efficiency improvements in a dichroic dye-doped liquid crystal Fresnel lens.

A dichroic dye-doped liquid crystal Fresnel lens was fabricated and investigated to observe the combination of phase and amplitude modulation based focusing. An anthraquinone dichroic dye was doped into a liquid crystal host, which when in the Fresnel lens configuration, generates a Fresnel zone plate with alternating "transparent" and "opaque" zones. The zones were induced by using photo-alignment of a light-sensitive alignment layer to generate the alternating pattern. The voltage dependency of efficiency for the dye-doped and pure liquid crystal Fresnel devices were investigated. Incorporation of dyes into the device yielded a significant 4% improvement in relative efficiency in the lens, giving a maximum of 37% achieved in the device, much closer to the theoretical 41% limit when compared with the non-dye-doped device. The input polarization dependence of efficiency was also investigated, showing very small fluctuations (±1.5%), allowing further insight into the effect of fabrication method on these liquid crystal Fresnel devices.

Lipid coated liquid crystal droplets for the on-chip detection of antimicrobial peptides.

We describe a novel biosensor based on phospholipid-coated nematic liquid crystal (LC) droplets and demonstrate the detection of Smp43, a model antimicrobial peptide (AMP) from the venom of North African scorpion Scorpio maurus palmatus. Mono-disperse lipid-coated LC droplets of diameter 16.7 ± 0.2 µm were generated using PDMS microfluidic devices with a flow-focusing configuration and were the target for AMPs. The droplets were trapped in a bespoke microfluidic trap structure and were simultaneously treated with Smp43 at gradient concentrations in six different chambers. The disruption of the lipid monolayer by the Smp43 was detected (<6 µM) at concentrations well within its biologically active range, indicated by a dramatic change in the appearance of the droplets associated with the transition from a typical radial configuration to a bipolar configuration, which is readily observed by polarizing microscopy. This suggests the system has feasibility as a drug-discovery screening tool. Further, compared to previously reported LC droplet biosensors, this LC droplet biosensor with a lipid coating is more biologically relevant and its ease of use in detecting membrane-related biological processes and interactions has the potential for development as a reliable, low-cost and disposable point of care diagnostic tool.

Self-assembling, macroscopically oriented, polymer filaments; a doubly nematic organogel.

Nanoscale phase separation and self-organisation in liquid crystals leads to the formation of remarkable hierarchical structures. There are several examples of heliconical nanofilament structures including in the nematic twist-bend (NTB) phase, the B4 phase and liquid crystal gels formed from the B4 phase. Both the formation of the polymer-like structures that permeate the soft-solids and their hierarchical structures are fascinating, not least because of the analogies that can be drawn with naturally-occurring structures. Here, we report a remarkably simple binary system formed from a non-symmetric BC molecule and the rod-like liquid crystal, 5CB. The pure bent-core system exhibits both nematic and dark conglomerate liquid crystal phases. At very low concentrations of the BC material (5-10%) this binary system spontaneously self-assembles into a soft solid formed from nanoscale filaments that are aligned by their nematic environment. Macroscopically, the soft solid shows behaviour that can be associated with both polymers and gels. Interestingly, the sub-micron scale structure of the filaments appears remarkably similar to some organised fibrous structures in nature (e.g. chitin, cellulose, insect cuticle, plant cell walls) something we attribute to self-assembly and self-organisation in an aligned liquid crystalline environment. The nanoscale structure of the filaments shows no features that can be associated with heliconical ordering down to length scales of tens of nanometers. However, the X-ray data suggest that a metastable rectangular columnar phase which is highly ordered in one dimension initially forms, changing to a hexagonal lattice on a timescale of tens of minutes.