Reactive Printing and Wash Fastness of Inherent Flame Retardant Fabrics for Dual Use.

The possibility of reactive printability on protective flame-resistant fabrics, varied in composition of weft threads and weave was investigated. In addition, the wash fastness of printed samples was analyzed. The functional properties of fabrics were assessed by measuring of the Limiting Oxygen Index (LOI). Printing was performed with two printing pastes varied in thickeners and two dyestuff concentrations. The samples were analyzed by microscopic imaging using digital microscope and spectrophotometric measurement before and after the five washing cycles. The results confirmed the printability of FR inherent fabrics specified through fine colored effects and optimal wash fastness.

Influence of Cotton Pre-Treatment on Dyeing with Onion and Pomegranate Peel Extracts.

In this paper the possibility of applying natural dyes on cellulose fibres were researched with respect to the impact of cotton material pre-treatment (scouring, chemical bleaching, mercerization and mordanting), using renewable sources of natural dyes (waste as a source). As mordants, metal salts of copper, aluminium and ferrum were used, and the influence on colour change as well as on fastness properties were analysed. The natural dyes were extracted from onion peel (Allium cepa L.) and pomegranate peel (Punica granatum L.). In spectrophotometric analysis performed of the plant extracts, the onion extract has peaks at 400 and 500 nm, resulting in red-orange colourations and the pomegranate extract shows a maximum at 400 nm, i.e., in the yellow region, which is characteristic of punicalin. Results show significant influence of cotton pre-treatments on colour appearance and fastness properties, caused by pre-treatments affecting the properties and structure of the cotton itself. The positive effect of mercerization on dye absorption and bonding is confirmed. For wash and light fastness properties, more satisfactory results have been obtained for yarns dyed with pomegranate peel natural dye, and the key importance of mordants for fastness properties has been confirmed.

Influence of Cotton Cationization on Pigment Layer Characteristics in Digital Printing.

The paper examines the influence of cotton cationization on the print quality in terms of penetration, colour yield and colour depth, which have been analysed in comparison to cotton untreated and pretreated with conventional acrylate binder. The process of cationization during mercerization was performed with a cationizing agent Rewin DWR (CHT Bezema). Standard (non-cationized) and cationized fabric, with and without additional layering of binder have been printed by digital inkjet pigment printing method. Moisture management testing (MMT) and dynamic contact angle measurement (drop shape analyzer-DSA30S) were performed on standard and cationized fabric, with and without binder, both with and without pigment layer. After printing, the objective values of colour depth (K/S) and colour parameters L*, C* and h° were analysed. The samples were also analysed by the method of microscopic imaging using a DinoLite microscope. Printed samples were tested to washing fastness, and the results are presented in terms of total colour difference (dECMC), according to CMC(l:c) equation, after the 1st, 3rd, 5th, 7th and 10th washing cycles. Results showed that the cotton cationization will improve the uniformity and coverage of the printed area as well as increase the K/S value. For the samples with binder, the positive effect of cationization on the stability and bond strength between the polymer layer as a pigment carrier with the cotton fabric was confirmed.

Innovative Development of Batch Dyed 3D Printed Acrylonitrile/Butadiene/Styrene Objects.

According to the great impact of additive technology on the development of modern industry, a lot of research is being done to obtain 3D printed parts with better properties. This research is extremely important because there are no scientific papers in the field of post dyeing of acrylonitrile/butadiene/styrene (ABS) 3D printed parts. The experiment was carried out using disperse dyes on ABS specimens. The obtained coloration of the specimens was in the primary colors (yellow, red, and blue) in the specified dyestuff concentration range and was evaluated using an objective CIELab system. Based on the obtained color parameters, remission values and Kubelka-Munk coefficient, dye mixtures and an ombre effect were performed to obtain patterns in the desired hues. Abrasion resistance of disperse dyed specimens was tested using different abrasive materials over a wide range of fineness to simulate different indoor and outdoor soils and was compared to abrasion resistance of specimens produced from the industrially dyed wire with the master batch. The results show that 3D printed ABS products can be produced in one or more desired shades with satisfactory abrasion resistance. This undoubtedly represents the added value of 3D printed ABS parts and extends their application to the field of creative industries and design, specifically footwear design.

Trichromatic Vat Dyeing of Cationized Cotton.

This article deals with cationization of cotton during mercerization and its effects on trichromatic vat dyeing. If cationization is carried out during the after-treatment, regardless of cotton pretreatment, the reaction takes place on the surface and blocks cellulose groups, subsequently resulting in uneven coloration. However, when cationization is carried out with an epihalohydrin during the mercerization process, new cellulose is formed in which the cationic compound is uniformly distributed and trapped between cellulose chains, resulting in uniform coloration after the dyeing process. The reaction time for the process during mercerization is 24 h, thus a more favorable process was researched. Based on electrokinetic analysis, it was found that 5 h was sufficient for the reaction with 3-chloro-2-hydroxypropyltrimethyl ammonium chloride (CHPTAC). The cationization of cotton contributed to the processes of vat dyeing. The change in charge upon cationization resulted in very high adsorption of vat-dye anions, indicating that ionic bonding occurred in addition to van der Waals forces. The color depth improved by more than 10 times. It should be emphasized that the colors with higher chroma and targeted color hue, especially in trichromatic dyeing, were obtained on cationized cotton, in contrast to standard cotton fabrics. The color differences obtained under the different light sources indicate the occurrence of metamerism. Considering the color fastness to laundering, vat-dyed cationized fabrics of all colors may be used in hospitals or other environments where high hygiene and oxidative bleaching are required.