Adhesion modification of neural stem cells induced by nanoscale ripple patterns.

We have studied the influence of anisotropic nanopatterns (ripples) on the adhesion and morphology of mouse neural stem cells (C17.2) on glass substrates using cell viability assay, optical microscopy and atomic force microscopy. The ripples were produced by defocused ion beam sputtering with inert Ar ions, which physically remove atoms from the surface at the energy of 800 eV. The ripple periodicity (∼200 nm) is comparable to the thickness of the cytoplasmatic microspikes (filopodia) which link the stem cells to the substrate. All methods show that the cell adhesion is significantly lowered compared to the same type of cells on flat glass surfaces. Furthermore, the AFM analysis reveals that the filopodia tend to be trapped parallel or perpendicular to the ripples, which limits the spreading of the stem cell on the rippled substrate. This opens the perspective of controlling the micro-adhesion of stem cells and the orientation of their filopodia by tuning the anisotropic substrate morphology without chemical reactions occurring at the surface.

Observation of Localized Vibrational Modes of Graphene Nanodomes by Inelastic Atom Scattering.

Inelastic helium atom scattering (HAS) is suitable to determine low-energy (few meV) vibrations spatially localized on structures in the nanometer range. This is illustrated for the nanodomes that appear often on graphene (Gr) epitaxially grown on single crystal metal surfaces. The nature of the inelastic losses observed in Gr/Ru(0001) and Gr/Cu/Ru(0001) has been clarified by intercalation of Cu below the Gr monolayer, which decouples the Gr layer from the Ru substrate and changes substantially the out-of-plane, flexural phonon dispersion of epitaxial Gr, while maintaining the nanodomes and their localized vibrations. He diffraction proves that the Cu-intercalated Gr layer is well ordered structurally, while scanning tunneling microscopy reveals the persistence of the (slightly modified) periodic array of Gr nanodomes. A simple model explains the order of magnitude of the energy losses associated with the Gr nanodomes and their size dependence. The dispersionless, low-energy phonon branches may radically alter the transport of heat in intercalated Gr.

Nanobubble and nanodroplet template growth of particle nanorings versus nanoholes in drying nanofluids and polymer films.

Here we demonstrate how confined nanobubbles and nanodroplets, which can either form spontaneously at the suspension/substrate interface, or can more interestingly be purposely introduced in the system, allow assembly of nanoparticles (NPs) into nanoring-like structures with a flexible control of both the size and distribution. As with most wetting-mediated nanopatterning methods, this approach provides an alternative to direct replication from templates. The formation of two-dimensional ring-shaped nanostructures was obtained by drying a nanocolloidal gold (Au) suspension drop confining nanobubbles (or nanodroplets) that are settled at a solid substrate. AFM investigation of the dry nanostructures showed the formation of isolated Au NPs rings having diameters ranging from 200 nm to 500 nm along the dewetting-drying path of the suspension drop. The flexibility of these wetting processes for the variation of the spatial features of the nanoring (size and shape resolution) essentially depends on physical parameters such as the nanobubble/nanodroplet size and concentration, the wettability, and the evaporation rate of the nanofluid drop on the substrate. Furthermore, we show that the underpinning mechanism of this evaporation-assisted assembly of Au NPs into supported functional nanoring patterns is fairly similar to that at work in the spontaneous formation of nanoholes in drying polymer thin films. Finally, the method proves to be a simple and flexible nanofabrication tool to be extended to various nanosize objects, towards specific optical and sensing applications.

Dynamic superlubricity on insulating and conductive surfaces in ultra-high vacuum and ambient environment.

Atomic-scale friction between a sharp tip at the end of a micro-fabricated silicon cantilever and atomically flat surfaces (NaCl, KBr, HOPG and mica) can be significantly reduced by piezo-induced perpendicular mechanical oscillations at specific resonance frequencies of the cantilever in gentle contact with the sample. The reported measurements confirm and extend the applicability of the effect recently demonstrated using electro-capacitive actuation on alkali halide surfaces in ultra-high vacuum (Socoliuc et al 2006 Science 313 208). A controlled reduction of friction is now observed even on a conductive surface and under ambient conditions, which is quite promising for applications to micro-electromechanical devices. The theory previously used to interpret 'dynamic superlubricity' is supported by new measurements showing that the contact can be maintained in that regime and that the initial reduction of friction is linear versus oscillation amplitude. The calibration of the oscillating component of the normal force is also discussed.

The analytical relations between particles and probe trajectories in atomic force microscope nanomanipulation.

Analytical expressions relating the trajectories of spherical nanoparticles pushed by an atomic force microscope tip to the scan pattern of the tip are derived. In the case of a raster scan path, the particles are deflected in a direction defined by the geometries of tip and particles and the spacing b between consecutive scan lines. In the case of a zigzag scan path, the particles are deflected in a range of directions around 90 degrees, also depending on the parameter b. Experimental results on gold nanoparticles manipulated on silicon surfaces in ambient conditions confirm the predictions of our model.

Thermal stability and reconstruction of nanoparticulate Au film on model molecular surfaces.

Thermally activated morphological reconstruction of nanoparticulate gold films deposited onto model molecular surfaces was investigated at 200 degrees C as a function of the annealing time. Results show a strong correlation of the spatial reorganization of the metallic particles to the surface chemistry of the underlying substrate. On the nonpolar surface, the thin nanoparticulate Au film dewets by the formation of randomly distributed nucleation holes. Two morphological reconstruction kinetics were observed. The first kinetics characterized by a sigmoid growth describes the time-evolution of the dewetted spots and particle size inside the spots, and the second corresponds to the number density of particles and displays an exponential decay with time. Ultimately our results show that even at temperatures well below the bulk metal melting point, nanoparticulate metal structures can undergo drastic morphological reconstructions which can irreversibly affect their functional properties and performance (catalysis, electronic).

Manipulation of gold nanoparticles: influence of surface chemistry, temperature, and environment (vacuum versus ambient atmosphere).

We have manipulated raw and functionalized gold nanoparticles (with a mean diameter of 25 nm) on silicon substrates with dynamic atomic force microscopy (AFM). Under ambient conditions, the particles stick to silicon until a critical amplitude is reached by the oscillations of the probing tip. Beyond that threshold, the particles start to follow different directions, depending on their geometry and adhesion to the substrate. Higher and lower mobility were observed when the gold particles were coated with methyl- and hydroxyl-terminated thiol groups, respectively, which suggests that the adhesion of the particles to the substrate is strongly reduced by the presence of hydrophobic interfaces. Under ultrahigh vacuum conditions, where the water layer is absent, the particles did not move, even when operating the atomic force microscope in contact mode. We have also investigated the influence of the temperature (up to 150 degrees C) and of the geometrical arrangement of the particles on the manipulation process. Whereas thermal activation has an important effect in enhancing the mobility of the particles, we did not find differences when manipulating ordered versus random distributions of particles.

Transition from stick-slip to continuous sliding in atomic friction: entering a new regime of ultralow friction.

A transition from stick-slip to continuous sliding is observed for atomically modulated friction by means of a friction force microscope. When the stick-slip instabilities cease to exist, a new regime of ultralow friction is encountered. The transition is described in the framework of the Tomlinson model using a parameter eta which relates the strength of the lateral atomic surface potential and the stiffness of the contact under study. Experimentally, this parameter can be tuned by varying the normal load on the contact. We compare our results to a recently discussed concept called superlubricity.

Interaction potential and hopping dynamics governing sliding friction.

The friction force on a nanometer-sized tip sliding on a surface is related to the thermally activated hopping of the contact atoms on an effective atomic interaction potential. A general analytical expression relates the height of this potential and the hopping attempt frequency to measurements of the velocity dependence of the friction force performed with an atomic force microscope. While the height of the potential is roughly proportional to the normal load, the attempt frequency falls in the range of mechanical eigenfrequencies of the probing tip in contact with the surface.

Abrasive wear on the atomic scale.

A scanning force microscope in ultrahigh vacuum has been used to realize and detect atomic-scale abrasion on KBr(001). The continuous time evolution of the lateral force under scratching reveals that the wear mechanism is due to the removal and the rearrangement of single ion pairs. The debris is reorganized in regular terraces with the same periodicity and orientation as the unscratched surface, as in local epitaxial growth. The applied load has a strong influence on the abrasive process, whereas the scan velocity is less relevant.

Velocity dependence of atomic friction

Sliding friction between the tip of a friction force microscope and NaCl(100) was studied to deduce the velocity dependence of friction forces on the atomic scale. A logarithmic dependence of the mean friction force is revealed at low velocities. The experimental data are interpreted in terms of a modified Tomlinson model which is based on reaction rate theory.