Long-term stabilization of organic solar cells using hindered phenols as additives.

We report on the improvement of long-term stability of organic solar cells (OPV) using hindered phenol based antioxidants as stabilizing additives. A set of seven commercially available hindered phenols are investigated for use in bulk-heterojunction OPV. Polymer:fullerene films based on poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) are characterized with respect to the initial power conversion efficiency and the long-term stability improvement under illumination in ambient conditions. FTIR spectroscopy is used to trace chemical degradation over time. OPV performance is recorded under ISOS-3 conditions, and an improved long-term performance of OPV devices, manifested in increased accumulated power generation (APG), is found for octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate. Using this additive, APG is increased by a factor of 3 compared to the reference. Observed differences in the stabilization of tested additives are discussed in terms of energetic trap states formation within the HOMO/LUMO gap of the photoactive material, morphological changes, and chemical structure.

Modification of the active layer/PEDOT:PSS interface by solvent additives resulting in improvement of the performance of organic solar cells.

The influence of various polar solvent additives with different dipole moments has been investigated since the performance of a photovoltaic device comprising a donor-acceptor copolymer (benzothiadiazole-fluorene-diketopyrrolopyrrole (BTD-F-DKPP)) and phenyl-C60-butyric acid methyl ester (PCBM) was notably increased. A common approach for controlling bulk heterojunction morphology and thereby improving the solar cell performance involves the use of solvent additives exhibiting boiling points higher than that of the surrounding solvent in order to allow the fullerene to aggregate during the host solvent evaporation and film solidification. In contrast to that, we report the application of polar solvent additives with widely varied dipole moments, where intentionally no dependence on their boiling points was applied. We found that an appropriate amount of the additive can improve all solar cell parameters. This beneficial effect could be largely attributed to a modification of the poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-active layer interface within the device layer stack, which was successfully reproduced for polymer solar cells based on the commonly used PCDTBT (poly[N-900-hepta-decanyl-2,7-carbazole-alt-5,5-(40,70-di-2-thienyl-20,10,30-benzothiadiazole)]) copolymer.

Sub-bandgap absorption in organic solar cells: experiment and theory.

Most high-performance organic solar cells involve bulk-heterojunctions in order to increase the active donor-acceptor interface area. The power conversion efficiency depends critically on the nano-morphology of the blend and the interface. Spectroscopy of the sub-bandgap region, i.e., below the bulk absorption of the individual components, provides unique opportunities to study interface-related properties. We present absorption measurements in the sub-bandgap region of bulk heterojunctions made of poly(3-hexylthiophene-2,5-diyl) as an electron donor and [6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) as an electron acceptor and compare them with quantum-chemical calculations and recently published data on the external quantum efficiency (EQE). The very weak absorption of the deep sub-bandgap region measured by the ultra-sensitive Photothermal Deflection Spectroscopy (PDS) features Urbach tails, polaronic transitions, conventional excitons, and possibly charge-transfer states. The quantum-chemical calculations allow characterizing some of the unsettled spectral features.

[70]fullerene-based materials for organic solar cells.

The synthesis, characterization and photovoltaic study of two novel derivatives of [70]fullerene, phenyl-C71-propionic acid propyl ester ([70]PCPP) and phenyl-C71-propionic acid butyl ester ([70]PCPB), are reported. [70]PCPP and [70]PCPB outperform the conventional material (6,6)-phenyl-C71-butyric acid methyl ester ([70]PCBM) in solar cells based on poly(2-methoxy-5-{3',7'-dimethyloctyloxy}-p-phenylene vinylene) (MDMO-PPV) as a donor polymer using chlorobenzene (CB) or dichlorobenzene (DCB) as solvents. AFM data suggest that improvement of the device efficiency should be attributed to the increased phase compatibility between the novel C70 derivatives and the polymer matrix. [70]PCPP and [70]PCBM showed more or less equally high performances in solar cells comprising poly(3-hexylthiophene) (P3HT) as a donor polymer. Optical modeling revealed that the application of [70]fullerene derivatives as acceptor materials in P3HT-based bulk heterojunction solar cells might give approximately 10 % higher short circuit current densities than using C60-based materials such as [60]PCBM. The high solubility of [70]PCPP and [70]PCPB and their good compatibility with the donor polymers suggest these fullerene derivatives as promising electron acceptor materials for use in efficient bulk heterojunction organic solar cells.