Imaging cellulose synthase motility during primary cell wall synthesis in the grass Brachypodium distachyon.

The mechanism of cellulose synthesis has been studied by characterizing the motility of cellulose synthase complexes tagged with a fluorescent protein; however, this approach has been used exclusively on the hypocotyl of Arabidopsis thaliana. Here we characterize cellulose synthase motility in the model grass, Brachypodium distachyon. We generated lines in which mEGFP is fused N-terminal to BdCESA3 or BdCESA6 and which grew indistinguishably from the wild type (Bd21-3) and had dense fluorescent puncta at or near the plasma membrane. Measured with a particle tracking algorithm, the average speed of GFP-BdCESA3 particles in the mesocotyl was 164 ± 78 nm min-1 (error gives standard deviation [SD], n = 1451 particles). Mean speed in the root appeared similar. For comparison, average speed in the A. thaliana hypocotyl expressing GFP-AtCESA6 was 184 ± 86 nm min-1 (n = 2755). For B. distachyon, we quantified root diameter and elongation rate in response to inhibitors of cellulose (dichlorobenylnitrile; DCB), microtubules (oryzalin), or actin (latrunculin B). Neither oryzalin nor latrunculin affected the speed of CESA complexes; whereas, DCB reduced average speed by about 50% in B. distachyon and by about 35% in A. thaliana. Evidently, between these species, CESA motility is well conserved.

Inexpensive electronics and software for photon statistics and correlation spectroscopy.

Single-molecule-sensitive microscopy and spectroscopy are transforming biophysics and materials science laboratories. Techniques such as fluorescence correlation spectroscopy (FCS) and single-molecule sensitive fluorescence resonance energy transfer (FRET) are now commonly available in research laboratories but are as yet infrequently available in teaching laboratories. We describe inexpensive electronics and open-source software that bridges this gap, making state-of-the-art research capabilities accessible to undergraduates interested in biophysics. We include a discussion of the intensity correlation function relevant to FCS and how it can be determined from photon arrival times. We demonstrate the system with a measurement of the hydrodynamic radius of a protein using FCS that is suitable for the undergraduate teaching laboratory. The FPGA-based electronics, which are easy to construct, are suitable for more advanced measurements as well, and several applications are described. As implemented, the system has 8 ns timing resolution, can control up to four laser sources, and can collect information from as many as four photon-counting detectors.

Indocyanine dyes approach free rotation at the 3' terminus of A-RNA: a comparison with the 5' terminus and consequences for fluorescence resonance energy transfer.

Cyanine dyes are widely used to study the folding and structural transformations of nucleic acids using fluorescence resonance energy transfer (FRET). The extent to which FRET can be used to extract inter- and intramolecular distances has been the subject of considerable debate in the literature; the contribution of dye and linker dynamics to the observed FRET signal is particularly troublesome. We used molecular dynamics (MD) simulations to study the dynamics of the indocarbocyanine dyes Cy3 and Cy5 attached variously to the 3' or 5' terminal bases of a 16-base-pair RNA duplex. We then used Monte Carlo modeling of dye photophysics to predict the results of single-molecule-sensitive FRET measurements of these same molecules. Our results show that the average value of FRET depends on both the terminal base and the linker position. In particular, 3' attached dyes typically explore a wide region of configuration space, and the relative orientation factor, κ(2), has a distribution that approaches that of free-rotators. This is in contrast to 5' attached dyes, which spend a significant fraction of their time in one or more configurations that are effectively stacked on the ends of the RNA duplex. The presence of distinct dye configurations for 5' attached dyes is consistent with observations, made by others, of multiple fluorescence lifetimes of Cy3 on nucleic acids. Although FRET is frequently used as a molecular "ruler" to measure intramolecular distances, the unambiguous measurement of distances typically relies on the assumption that the rotational degrees of freedom of the dyes can be averaged out and that the donor lifetime in the absence of the acceptor is a constant. We demonstrate that even for the relatively free 3' attached dyes, the correlation time of κ(2) is still too long to justify the use of a free-rotation approximation. We further explore the consequences of multiple donor lifetimes on the predicted value of FRET.

Droplet confinement and fluorescence measurement of single molecules.

We describe a method for molecular confinement and single-fluorophore sensitive measurement in aqueous nanodroplets in oil. The sequestration of individual molecules in droplets has become a useful tool in genomics and molecular evolution. Similarly, the use of single fluorophores, or pairs of fluorophores, to study biomolecular interactions and structural dynamics is now common. Most often these single-fluorophore sensitive measurements are performed on molecules that are surface attached. Confinement via surface attachment permits molecules to be located and studied for a prolonged period of time. For molecules that denature on surfaces, for interactions that are transient or out-of-equilibrium, or to observe the dynamic equilibrium of freely diffusing reagents, surface attachment may not be an option. In these cases, droplet confinement presents an alternative method for molecular confinement. Here, we describe this method as used in single-fluorophore sensitive measurement and discuss its advantages, limitations, and future prospects.

Generation and mixing of subfemtoliter aqueous droplets on demand.

We describe a novel method of generating monodisperse subfemtoliter aqueous droplets on demand by means of piezoelectric injection. Droplets with volumes down to 200 aL are generated by this technique. The droplets are injected into a low refractive index perfluorocarbon so that they can be optically trapped. We demonstrate the use of optical tweezers to manipulate and mix droplets. For example, using optical tweezers we bring two droplets, one containing a calcium sensitive dye and the other calcium chloride, into contact. The droplets coalesce with a resulting reaction time of about 1 ms. The monodispersity, manipulability, repeatability, small size, and fast mixing afforded by this system offer many opportunities for nanochemistry and observation of chemical reactions on a molecule-by-molecule basis.

Green fluorescent protein in inertially injected aqueous nanodroplets.

We inertially inject and study the contents of optically trappable aqueous nanodroplets (hydrosomes) emulsified in a perfluorinated matrix. A new piezoelectric actuated device for production of single hydrosomes on demand is introduced. Hydrosomes containing enhanced green fluorescent protein (EGFP) were injected, optically trapped, and held at the focus of an excitation laser in a confocal microscope, and single-molecule photobleaching events were observed. The rotational diffusion time of EGFP in trapped hydrosomes was measured using time-resolved fluorescence anisotropy. In free solution, the mean rotational diffusion time was determined to be 13.8 +/- 0.1 ns at 3 microM and 14.0 +/- 0.2 ns at 10 microM. In hydrosomes, the mean rotational diffusion time was similar and determined to be 12.6 +/- 1.0 ns at 3 microM and 15.5 +/- 1.6 ns at 10 microM. We conclude that the rotational motion inside the nanodroplets is consistent with rotation in free solution and that the protein therefore does not aggregate at the water-oil interface. Protein can be confined in hydrosomes with high efficiency using this technique, which provides an alternative to surface attachment or lipid encapsulation and opens up new avenues of research using single molecules contained in fluid nanovolumes.

Homebuilt single-molecule scanning confocal fluorescence microscope studies of single DNA/protein interactions.

Many technical improvements in fluorescence microscopy over the years have focused on decreasing background and increasing the signal to noise ratio (SNR). The scanning confocal fluorescence microscope (SCFM) represented a major improvement in these efforts. The SCFM acquires signal from a thin layer of a thick sample, rejecting light whose origin is not in the focal plane thereby dramatically decreasing the background signal. A second major innovation was the advent of high quantum-yield, low noise, single-photon counting detectors. The superior background rejection of SCFM combined with low-noise, high-yield detectors makes it possible to detect the fluorescence from single-dye molecules. By labeling a DNA molecule or a DNA/protein complex with a donor/acceptor dye pair, fluorescence resonance energy transfer (FRET) can be used to track conformational changes in the molecule/complex itself, on a single molecule/complex basis. In this methods paper, we describe the core concepts of SCFM in the context of a study that uses FRET to reveal conformational fluctuations in individual Holliday junction DNA molecules and nucleosomal particles. We also discuss data processing methods for SCFM.

Fourier analysis near-field polarimetry for measurement of local optical properties of thin films.

We present measurements of the local diattenuation and retardance of thin-film specimens by using techniques that combine near-field scanning optical microscopy (NSOM) and a novel polarization-modulation (PM) polarimetry utilizing Fourier analysis of the detected intensity signal. Generally, quantitative near-field polarimetry is hampered by the optical anisotropy of NSOM probes. For example, widely used aluminum-coated pulled-fiber aperture probes typically exhibit a diattenuation near 10%. Our analysis of aperture diattenuation demonstrates that the usual techniques for nulling a PM polarimeter result in a nonzero residual probe retardance in the presence of a diattenuating tip. However, we show that both diattenuation and retardance of the sample can be determined if the corresponding tip properties are explicitly measured and accounted for in the data. In addition, in thin films (<100 nm thick), where the sample retardance and diattenuation are often small, we show how to determine these polarimetric quantities without requiring alignment of the fast and diattenuating axes, which is a more general case than has been previously discussed. We demonstrate our techniques by using two types of polymer-film specimens: ultrahigh molecular weight block copolymers (recently noted for their photonic activity) and isotactic polystyrene spherulites. Finally, we discuss how changes in the tip diattenuation during data collection can limit the accuracy of near-field polarimetry and what steps can be taken to improve these techniques.

Measuring local optical properties: near-field polarimetry of photonic block copolymer morphology.

Ultrahigh molecular weight polystyrene-b-polyisoprene block copolymers (BCs), noted for their photonic behavior, were imaged using transmission near-field scanning optical microscopy (NSOM) and NSOM polarimetry. Our improved scheme for polarization modulation (PM) polarimetry, which accounts for optical anisotropies of the NSOM aperture probe, enables mapping of the local diattenuation and birefringence (with separately aligned diattenuating and fast axes) in these specimens with subdiffraction limited resolution. PM-NSOM micrographs illuminate the mesoscopic optical nature of these BC specimens by resolving individual microphase domains and defect structures.