Physicochemical, structural, and rheological characteristics of corn starch after thermal-ultrasound processing.

Thermal-ultrasound treatment is a green technology that can significantly alter the structural and functional properties of starches. This research extend the effect of at different temperatures (25 °C, 45 °C, and 65 °C) and times (30 and 60 min) on the physicochemical, structural, and rheological properties of corn starch was studied. Amylose content, solubility, swelling power, and the least gelling content increased with increasing temperature and time. Starch treated at 45 °C for 30 min had the lowest syneresis among all treatments. Thermal-ultrasound treatment at 25 °C and 65 °C for 60 min caused increasing paste clarity. Microscopic observations demonstrated that the starch granules were agglomerated at 65 °C. Although the crystallinity of samples decreased from 35.42% to 8.94%, the storage modulus was more than the loss modulus during the frequency sweep test. Pasting properties showed that pasting temperatures shifted to higher values after treatment. Nonetheless, the maximum viscosity decreased, and the final viscosity of the treated samples demonstrated that short-term retrogradation could deteriorate. Results showed that thermal-ultrasound is a viable technique for starch modification compared to conventional thermal and ultrasound treatments.

Modification of corn starch by thermal-ultrasound treatment in presence of Arabic gum.

This research extends the effects of a thermal-ultrasound treatment (at 25, 45, and 65 °C for 30 and 60 min) on the physicochemical, structural, and pasting properties of corn starch in presence of Arabic gum. Treated samples had lower leached amylose compared with corn starch, but it was non-significant (p < 0.05). In comparison to alone corn starch and a combination of Arabic gum, thermal-ultrasound treatment increased the swelling power and solubility of samples. Treatment significantly (p < 0.05) decreased the syneresis of treated starch gels, especially at a temperature of < 45 °C, but paste clarity was increased at the higher temperature (65 °C). The enthalpy of treated samples was in the range 15.20-16.37 J/g. Sonication at 65 °C for 60 min had the most destructive effect on corn starch granules, but at 30 min granules were swollen only. FT-IR spectra of samples confirmed the physical modification of thermal-ultrasound treatment. The relative crystallinity index of samples changed in the range 21.88-35.42-% and decreased with rising time and temperature. Sonication at 45 °C for 30 and 60 min produced starch-gum mixtures with different pasting properties. Thermal-ultrasound treatment in presence of gum can be a viable technique to modify starches with different functionality.

Altering allergenicity of cow's milk by food processing for applications in infant formula.

Cow's milk-based infant formulas have a long tradition in infant nutrition, although some infants are unable to use them due to presence of several known allergens. Various processing methods have been identified capable of reducing cow's milk protein allergenicity including thermal and non-thermal methods and their combinations. Heat treatment and enzymatic hydrolysis have been in production of hypoallergenic infant formulas. However, modulation of allergenic epitopes depends on the extent of heat treatment applied, which consequently may also reduce a nutritional value of these proteins. In addition, enzymatic hydrolysis may not target allergenic epitopes thus allergenicity may persist; however released peptides may have detrimental impact on taste and functional properties of final products. Modulation of allergenicity of milk proteins appears to require a concerted effort to minimize detrimental effects as clinical studies conducted on commercial hypoallergenic formulas demonstrated persistence of allergic symptoms. This article covers traditional and novel processing methods and their impact on reduction of cow's milk allergenicity in milk-based infant formulas.

Fabrication of whey proteins aggregates by controlled heat treatment and pH: Factors affecting aggregate size.

Protein aggregates can be formed by heating globular proteins above the thermal denaturation of the proteins. These aggregates can be used as delivery systems or to modulate the physicochemical and sensory properties of food products. In this study, the effects of heat treatment (15 min at 80 °C), pH adjustment (between 4 and 9), aging at different temperatures (between 10 and 60 °C) and the rate of acidification (pH decreased from 6.25 to 4 at 5 different rates) on whey proteins aggregates were studied. The results indicated that these treatments led to creation of aggregates with different sizes (0.72-5.1 µm). Heat treatment and reducing the pH down to nearly 4 led to an increase in the size of aggregates. At pH < 7, by increasing the aging temperature, the size of aggregates increased (without heat treatment). In the heat treated samples with pH < 9, increasing the aging temperature led to an increase in the size of aggregates. Also larger aggregates were formed by increasing acidification rate. The amount of insoluble whey proteins aggregates increased as a result of applying heat treatment, decreasing pH and increasing aging temperature. The results of this study can be used for fabrication of whey proteins aggregates with specific size and functionality.

Improving the emulsifying properties of ß-lactoglobulin-wild almond gum (Amygdalus scoparia Spach) exudate complexes by heat.

BACKGROUND: The present study aims to investigate the advantageous effects of wet heating, BLG (ß-lactoglobulin)/Ang (Angum gum) ratio, and pH (normal pH of mixed BLG and Ang solutions, pHc > pH > pHΦ1 ) on the emulsifying properties of wet-heated ß-lactoglobulin-wild almond gum exudate (Amygdalus scoparia Spach) mixture over those of electrostatic counterparts. RESULTS: Covalent linkage of BLG-Ang conjugates was confirmed by SDS-PAGE and FTIR analysis. Emulsion activity (EA), emulsion stability (ES), and droplet size characteristics of emulsions were significantly (P < 0.05 and P < 0.01) affected by electrostatic/wet-heating, biopolymer ratio, pH, and their interactions. The electrostatic complexes with pHc > pH > pHΦ1 exhibited higher EA and ES values for all the biopolymer ratios investigated than their electrostatic counterparts with pH after mixing. However, these values for the wet-heated samples at pH after mixing were found to be higher than those of the samples subjected to heat treatment at pHc > pH > pHΦ1 . Based on the results obtained, it was concluded that E/1:2/3.80 and W/1:2/6.69 were the two complexes with finer droplet size distributions after preparation (26.72 ± 3.71 and 15.27 ± 1.01 µm, respectively) and after one week of storage at 4 °C (30.71 ± 1.57 and 28.79 ± 0.56 µm, respectively) than others. Apparent viscosities of electrostatic and wet-heated complexes and emulsions made with the complexes were measured. CONCLUSION: Protein-polysaccharide interactions can be used as an efficient way for producing novel emulsifiers/stabilisers after heat treatment. © 2016 Society of Chemical Industry.