Development and in vitro-in vivo performances of an inhalable indole-3-carboxaldehyde dry powder to target pulmonary inflammation and infection.

A tryptophan metabolite of microbial origin, indole-3-carboxaldehyde (3-IAld), has been recently identified as a Janus molecule that, acting at the host-pathogen interface and activating the aryl hydrocarbon receptor, can result as a potential candidate to treat infections as well as diseases with an inflammatory and/or immune component. In this work, an inhaled dry powder of 3-IAld was developed and evaluated for its efficacy, compared to oral and intranasal administration using an aspergillosis model of infection and inflammation. The obtained inhalable dry powder was shown to: i) be suitable to be delivered for pulmonary administration, ii) possess good toxicological safety, and iii) be superior to other administration modalities (oral and intranasal) in reducing disease scores by acting on infection and inflammation. This study supports the use of 3-IAld inhalable dry powders as a potential novel therapeutic tool to target inflammation and infection in pulmonary diseases.

Development and in vitro characterization of a novel pMDI diclofenac formulation as an inhalable anti-inflammatory therapy for cystic fibrosis.

Anti-inflammatory treatment options for cystic fibrosis (CF) patients are currently limited and as such, there is an imperative need to develop new anti-inflammatory agents to reduce the persistent inflammation present within CF lungs. This study explored the potential of Diclofenac (DICLO) as a novel inhaled anti-inflammatory drug for CF treatment. The anti-inflammatory activity of DICLO on an air-liquid interface (ALI) cell culture model of healthy (NuLi-1) and CF (CuFi-1) airways showed a significant reduction in the secretion of pro-inflammatory cytokines, IL-6 and IL-8. Therefore, pressurized metered dose inhaler (pMDI) DICLO formulations were developed to allow targeted DICLO delivery to CF airways. As such, two pMDI DICLO formulations with varying ethanol concentrations: 5% (w/w) equating to 150 µg of DICLO per dose (Low dose), and 15% (w/w) equating to 430 µg of DICLO per dose (High dose) were developed and characterized to determine the optimum formulation. The Low dose pMDI DICLO formulation showed a significantly smaller particle diameter with uniform distribution resulting in a greater aerosol performance when compared to High dose formulation. Consequently, the Low dose pMDI DICLO formulation was further evaluated in terms of in vitro transport characteristics and anti-inflammatory activity. Importantly, the DICLO pMDI displayed anti-inflammatory activity in both healthy and CF in vitro models, highlighting the potential of an aerosolized low-dose DICLO formulation as a promising inhaled anti-inflammatory therapy for CF treatment.

On the Use of Computational Fluid Dynamics (CFD) Modelling to Design Improved Dry Powder Inhalers.

PURPOSE: Computational Fluid Dynamics (CFD) simulations are performed to investigate the impact of adding a grid to a two-inlet dry powder inhaler (DPI). The purpose of the paper is to show the importance of the correct choice of closure model and modeling approach, as well as to perform validation against particle dispersion data obtained from in-vitro studies and flow velocity data obtained from particle image velocimetry (PIV) experiments. METHODS: CFD simulations are performed using the Ansys Fluent 2020R1 software package. Two RANS turbulence models (realisable k - ε and k - ω SST) and the Stress Blended Eddy Simulation (SBES) models are considered. Lagrangian particle tracking for both carrier and fine particles is also performed. RESULTS: Excellent comparison with the PIV data is found for the SBES approach and the particle tracking data are consistent with the dispersion results, given the simplicity of the assumptions made. CONCLUSIONS: This work shows the importance of selecting the correct turbulence modelling approach and boundary conditions to obtain good agreement with PIV data for the flow-field exiting the device. With this validated, the model can be used with much higher confidence to explore the fluid and particle dynamics within the device.

Characterization of Negative Allosteric Modulators of the Calcium-Sensing Receptor for Repurposing as a Treatment of Asthma.

Asthma is still an incurable disease, and there is a recognized need for novel small-molecule therapies for people with asthma, especially those poorly controlled by current treatments. We previously demonstrated that calcium-sensing receptor (CaSR) negative allosteric modulators (NAMs), calcilytics, uniquely suppress both airway hyperresponsiveness (AHR) and inflammation in human cells and murine asthma surrogates. Here we assess the feasibility of repurposing four CaSR NAMs, which were originally developed for oral therapy for osteoporosis and previously tested in the clinic as a novel, single, and comprehensive topical antiasthma therapy. We address the hypotheses, using murine asthma surrogates, that topically delivered CaSR NAMs 1) abolish AHR; 2) are unlikely to cause unwanted systemic effects; 3) are suitable for topical application; and 4) inhibit airway inflammation to the same degree as the current standard of care, inhaled corticosteroids, and, furthermore, inhibit airway remodeling. All four CaSR NAMs inhibited poly-L-arginine-induced AHR in naïve mice and suppressed both AHR and airway inflammation in a murine surrogate of acute asthma, confirming class specificity. Repeated exposure to inhaled CaSR NAMs did not alter blood pressure, heart rate, or serum calcium concentrations. Optimal candidates for repurposing were identified based on anti-AHR/inflammatory activities, pharmacokinetics/pharmacodynamics, formulation, and micronization studies. Whereas both inhaled CaSR NAMs and inhaled corticosteroids reduced airways inflammation, only the former prevented goblet cell hyperplasia in a chronic asthma model. We conclude that inhaled CaSR NAMs are likely a single, safe, and effective topical therapy for human asthma, abolishing AHR, suppressing airways inflammation, and abrogating some features of airway remodeling. SIGNIFICANCE STATEMENT: Calcium-sensing receptor (CaSR) negative allosteric modulators (NAMs) reduce airway smooth muscle hyperresponsiveness, reverse airway inflammation as efficiently as topical corticosteroids, and suppress airway remodeling in asthma surrogates. CaSR NAMs, which were initially developed for oral therapy of osteoporosis proved inefficacious for this indication despite being safe and well tolerated. Here we show that structurally unrelated CaSR NAMs are suitable for inhaled delivery and represent a one-stop, steroid-free approach to asthma control and prophylaxis.

Nasal Powder Formulation of Tranexamic Acid and Hyaluronic Acid for the Treatment of Epistaxis.

PURPOSE: The aim of this study was to develop a nasal powder formulation of the antifibrinolytic drug, tranexamic acid (TXA), in combination with the wound-healing agent hyaluronic acid (HA) for the local treatment of epistaxis (nose bleeding). METHODS: Formulations of TXA alone and with different concentrations of HA were freeze-dried and characterised according to their physicochemical properties. Aerosol performance was assessed to ensure nasal deposition with minimal lung deposition. Nasal epithelial cells were used to assess cytotoxicity, transport across the nasal epithelium, antioxidant, wound-healing and anti-inflammatory properties of all formulations. RESULTS: Formulations containing TXA and HA were produced and found to be mostly deposited in the nasal cavity (more than 90%). Formulation of TXA + 0.3%HA showed wound reduction of 29.3% when assessed in ALI culture. At this concentration, formulations also reduced ROS production in RPMI 2650, and IL-8 production in primary nasal epithelial cells. Furthermore, for formulations containing HA, the higher viscosity may lead to larger residence time in the nasal cavity. CONCLUSIONS: Combination of TXA with HA shows promising results for the treatment of nasal epistaxis.

Paclitaxel-eluting silicone airway stent for preventing granulation tissue growth and lung cancer relapse in central airway pathologies.

BACKGROUND: Airway stents are used to treat obstructive central airway pathologies including palliation of lung cancer, but face challenges with granulation tissue growth. Paclitaxel is a chemotherapy drug that also suppresses growth of granulation tissue. Yet, side effects arise from administration with toxic solubilizers. By incorporating paclitaxel in silicone stents, delivery of paclitaxel can be localized, and side effects minimized. METHODS: Paclitaxel was incorporated into Liquid Silicone Rubber (LSR) containing polydimethylsiloxane, either as a powder or solution, prior to curing. Drug release study was compared in vitro at 37°C over 10 days. Drug release was quantified using HPLC, and bronchial cell lines were grown on LSR to investigate drug cytotoxicity, and expression of inflammatory markers, specifically interleukin-6 and interleukin-8. RESULTS: Release rate of paclitaxel incorporated into silicone rubber was consistent with the Korsmeyer and Weibull models (R2 > 0.96). Paclitaxel exposure reduced IL-8 levels in cancer cell lines, whilst no cytotoxic effect was observed in all cell lines at treatment concentration levels (≤ 0.1% (w/v) paclitaxel in silicone). CONCLUSIONS: Incorporating paclitaxel into a silicone matrix for future use in a tracheobronchial stent was investigated. Drug release from silicone was observed and is a promising avenue for future treatments of central airway pathologies.

Advances in the use of cell penetrating peptides for respiratory drug delivery.

Introduction: Respiratory diseases are leading causes of death in the world, still inhalation therapies are the largest fail in drug development. There is an evident need to develop new therapies. Biomolecules represent apotential therapeutic agent in this regard, however their translation to the clinic is hindered by the lack of tools to efficiently deliver molecules. Cell penetrating peptides (CPPs) have arisen as apotential strategy for intracellular delivery that could theoretically enable the translation of new therapies.Areas covered: In this review, the use of CPPs as astrategy to deliver different molecules (cargoes) to treat lung-relateddiseases will be the focus. Abrief description of these molecules and the innovative methods in designing new CPPs is presented. The delivery of different cargoes (proteins, peptides, poorly soluble drugs and nucleic acids) using CPPs is discussed, focusing on benefits to treat different respiratory diseases like inflammatory disorders, cystic fibrosis and lung cancer.Expert opinion: The advantages of using CPPs to deliver biomolecules and poorly soluble drugs to the lungs is evident. This field has advanced in the past few years toward targeted intracellular delivery, although further studies are needed to fully understand its potential and limitations in vitro and in vivo.

Delivery of pDNA to lung epithelial cells using PLGA nanoparticles formulated with a cell-penetrating peptide: understanding the intracellular fate.

The combination of nanoparticles (NPs) and cell-penetrating peptide (CPP) represents a new opportunity to develop plasmid DNA (pDNA) delivery systems with desirable properties for lung delivery. In this study, poly(lactide-co-glycolide) (PLGA) NPs containing pDNA were formulated with and without CPP using a double-emulsion technique. NPs were characterized in regards of size, surface charge, release profile, pDNA encapsulation efficiency and pDNA integrity. Cellular uptake, intracellular trafficking, uptake mechanism and pDNA expression were assessed in both A549 and Beas-2B cells. Manufactured PLGA-NPs efficiently encapsulated pDNA with approximately 50% released in the first 24 h of incubation. Addition of CPP was essential to promote NP internalization in both cell lines, with 83.85 ± 1.2% and 96.76 ± 1.7% of Beas-2B and A549 cells, respectively, with internalized NP-DNA-CPP after 3 h of incubation. Internalization appears to occur mainly via clathrin-mediated endocytosis, with other pathways also being used by the different cell lines. An endosomal-escape mechanism seems to happen in both cell lines, and eGFP expression was observed in Beas-2B after 96 h of incubation. In summary, the NP-DNA-CPP delivery system efficiently encapsulated and protected pDNA structure and is being investigated as a promising tool for gene delivery to the lungs.

Inhaled rapamycin solid lipid nano particles for the treatment of Lymphangioleiomyomatosis.

Lymphangioleiomyomatosis (LAM) is a rare lung disease characterized by uncontrolled growth of smooth muscle -like cells in the lungs that can spread via the lymphatic system to other parts of the body. The current treatment for LAM, oral rapamycin, is limited by its low oral bioavailability and side effects. This study aims to develop an inhaled formulation of rapamycin solid lipid nanoparticles (Rapa-SLNs) to avoid first-pass metabolism, increase invivo half-life and facilitate entry into the lymphatic system through the lungs. Rapa-SLNs were manufactured using a hot evaporation technique and freeze-dried overnight with 5% (w/v) mannitol and before being assessed further for particle characteristics and in vitro aerosol performance and release. The formulation's ability to penetrate through bronchial epithelial layer was evaluated using a Calu-3 cell model, while its ability to interfere with the LAM intracellular cascade was evaluated using Mouse Embryonic fibroblast (MEF) cells deficient for the tuberous sclerosis complex 2 (TSC2) and compared with rapamycin solution. Results showed that the Rapa- SLNs had the appropriate size (237.5 ±â€¯1.8 nm), charge (-11.2), in vitro aerosol performance (MMAD=5.4 ±â€¯0.4 µm) and sustained release profile suitable for entry into the lymphatic system via the pulmonary route. Additionally, the nanoparticles were transported at a faster rate across the bronchial epithelial layer compared to free rapamycin solution. The formulation also showed similar mTOR (mammalian target of Rapamycin) inhibition properties compared to free rapamycin, and was able to significantly decrease the amount of proliferation in TSC2 negative MEF cells. This formulation is therefore a promising alternative treatment for LAM patients, as it could potentially reduce problems associated with low bioavailability and side effects of current oral treatment.

Nanotoxicologic Effects of PLGA Nanoparticles Formulated with a Cell-Penetrating Peptide: Searching for a Safe pDNA Delivery System for the Lungs.

The use of cell-penetrating peptides (CPPs) in combination with nanoparticles (NPs) shows great potential for intracellular delivery of DNA. Currently, its application is limited due to the potential toxicity and unknown long-term side effects. In this study NPs prepared using a biodegradable polymer, poly(lactic⁻co⁻glycolic acid (PLGA) in association with a CPP, was assessed on two lung epithelial cell lines (adenocarcinomic human alveolar basal epithelial cells (A549) and normal bronchial epithelial cells (Beas-2B cells)). Addition of CPP was essential for intracellular internalization. No effects were observed on the mitochondrial activity and membrane integrity. Cells exposed to the NPs⁻DNA⁻CPP showed low inflammatory response, low levels of apoptosis and no activation of caspase-3. Increase in necrotic cells (between 10%⁻15%) after 24 h of incubation and increase in autophagy, induced by NPs⁻DNA⁻CPP, are likely to be related to the lysosomal escape mechanism. Although oxidative stress is one of the main toxic mechanisms of NPs, NPs⁻DNA⁻CPP showed decreased reactive oxygen species (ROS) production on Beas-2B cells, with potential antioxidant effect of CPP and no effect on A549 cells. This NP system appears to be safe for intracellular delivery of plasmid DNA to the lung epithelial cells. Further investigations should be conducted in other lung-related systems to better understand its potential effects on the lungs.

Delivery of pDNA Polyplexes to Bronchial and Alveolar Epithelial Cells Using a Mesh Nebulizer.

PURPOSE: In this study, a cell penetrating peptide was used as an uptake enhancer for pDNA delivery to the lungs. METHODS: Polyplexes were prepared between pDNA and CPP. Intracellular delivery of pDNA was assessed in both alveolar (A549) and bronchial (Calu-3) epithelial cells. Aerosol delivery was investigated using a mesh nebulizer. RESULTS: Efficient intracellular delivery of pDNA occurs in both A549 and Calu-3 cells when delivered as polyplexes. Protection against nucleases and endosomal escape mechanism occurs when pDNA is formulated within the polyplexes. For aerosol delivery, 1% (w/v) mannitol was able to protect naked DNA structure during nebulization with a significant increase in fine particle fraction (particles <5 µm). The structure of polyplexes when delivered via a mesh nebulizer using 1% (w/v) mannitol could partially withstand the shear forces involved in aerosolization. Although some loss in functionality occurred after nebulization, membrane-associated fluorescence was observed in A549 cells. In Calu-3 cells mucus entrapment was a limiting factor for polyplex delivery. CONCLUSIONS: The presence of CPP is essential for efficient intracellular delivery of pDNA. The polyplexes can be delivered to lung epithelial cells using mesh nebulizer. The use of different excipients is essential for further optimization of these delivery systems.

Inhaled gene delivery: a formulation and delivery approach.

INTRODUCTION: Gene therapy is a potential alternative to treat a number of diseases. Different hurdles are associated with aerosol gene delivery due to the susceptibility of plasmid DNA (pDNA) structure to be degraded during the aerosolization process. Different strategies have been investigated in order to protect and efficiently deliver pDNA to the lungs using non-viral vectors. To date, no successful therapy involving non-viral vectors has been marketed, highlighting the need for further investigation in this field. Areas covered: This review is focused on the formulation and delivery of DNA to the lungs, using non-viral vectors. Aerosol gene formulations are divided according to the current delivery systems for the lung: nebulizers, dry powder inhalers and pressurized metered dose inhalers; highlighting its benefits, challenges and potential application. Expert opinion: Successful aerosol delivery is achieved when the supercoiled DNA structure is protected during aerosolization. A formulation strategy or compounds that can protect, stabilize and efficiently transfect DNA into the cells is desired in order to produce an effective, low-cost and safe formulation. Nebulizers and dry powder inhalers are the most promising approaches to be used for aerosol delivery, due to the lower shear forces involved. In this context it is also important to highlight the importance of considering the 'pDNA-formulation-device system' as an integral part of the formulation development for a successful nucleic acid delivery.