BioLindlar Catalyst: Ene-Reductase-Promoted Selective Bioreduction of Cyanoalkynes to Give (Z)-Cyanoalkenes.

The direct synthesis of alkenes from alkynes usually requires the use of transition-metal catalysts. Unfortunately, efficient biocatalytic alternatives for this transformation have yet to be discovered. Herein, the selective bioreduction of electron-deficient alkynes to alkenes catalysed by ene-reductases (EREDs) is described. Alkynes bearing ketone, aldehyde, ester, and nitrile moieties have been effectively reduced with excellent conversions and stereoselectivities, observing clear trends for the E/Z ratios depending on the nature of the electron-withdrawing group. In the case of cyanoalkynes, (Z)-alkenes were obtained as the major product, and the reaction scope was expanded to a wide variety of aromatic substrates (up to >99% conversion, and Z/E stereoselectivities of up to >99/1). Other alkynes containing aldehyde, ketone, or ester functionalities also proved to be excellent substrates, and interestingly gave the corresponding (E)-alkenes. Preparative biotransformations were performed on a 0.4 mmol scale, producing the desired (Z)-cyanoalkenes with good to excellent isolated yields (63-97%). This novel reactivity has been rationalised through molecular docking by predicting the binding poses of key molecules in the ERED-pu-0006 active site.

Improving the sustainability of heterogeneous Fenton-based methods for micropollutant abatement by electrochemical coupling.

Advanced oxidation processes such as Fenton reaction-based processes have attracted great interest in recent years as a promising alternative for the removal of persistent pollutants in wastewater. The use of nanocatalysts in advanced oxidation processes overcomes the limitations of homogeneous Fenton processes, where acidic pH values are required, and a large amount of sludge is generated after treatment. Aiming at maximizing the catalytic potential of the process, different configurations include coupling photocatalysis or electrochemistry to Fenton reactions. This manuscript presents a comparative environmental and economic analysis of different heterogeneous Fenton-based process using magnetic nanoparticles: Fenton, photo-Fenton, electro-Fenton and photoelectron-Fenton. These alternatives encompass not only different reaction conditions but also varying degradation kinetics, which control the treatment capability in each specific case. It is not only important to determine the technological feasibility of the proposal based on the removal performance of the target compounds, but also to identify the environmental profile of each configuration. In this regard, the Life Cycle Assessment methodology was applied considering a combination of primary and secondary data from process modeling. Moreover, and aiming towards the future large-scale implementation of the technology, an economic analysis of each configuration was also performed to provide a better understanding about the costs associated to the operation of Fenton-based wastewater treatments.

Synthesis of Optically Active syn- and anti-Chlorohydrins through a Bienzymatic Reductive Cascade.

A bienzymatic cascade has been designed and optimized to obtain enantiopure chlorohydrins starting from the corresponding 1-aryl-2-chlorobut-2-en-1-ones. For the synthesis of these α-chloroenones, a two-step sequence was developed consisting of the allylation of the corresponding aldehyde with 3-dichloroprop-1-ene, followed by oxidation and further isomerization. The selective cooperative catalytic system involving ene-reductases (EREDs) and alcohol dehydrogenases (ADHs) afforded the desired optically active chlorohydrins under mild reaction conditions in excellent conversions (up to >99%) and selectivities (up to >99:1 diastereomeric ratio (dr), >99% enantiomeric excess (ee)).

Exploiting the Potential of Supported Magnetic Nanomaterials as Fenton-Like Catalysts for Environmental Applications.

In recent years, the application of magnetic nanoparticles as alternative catalysts to conventional Fenton processes has been investigated for the removal of emerging pollutants in wastewater. While this type of catalyst reduces the release of iron hydroxides with the treated effluent, it also presents certain disadvantages, such as slower reaction kinetics associated with the availability of iron and mass transfer limitations. To overcome these drawbacks, the functionalization of the nanocatalyst surface through the addition of coatings such as polyacrylic acid (PAA) and their immobilization on a mesoporous silica matrix (SBA15) can be factors that improve the dispersion and stability of the nanoparticles. Under these premises, the performance of the nanoparticle coating and nanoparticle-mesoporous matrix binomials in the degradation of dyes as examples of recalcitrant compounds were evaluated. Based on the outcomes of dye degradation by the different functionalized nanocatalysts and nanocomposites, the nanoparticles embedded in a mesoporous matrix were applied for the removal of estrogens (E1, E2, EE2), accomplishing high removal percentages (above 90%) after the optimization of the operational variables. With the feasibility of their recovery in mind, the nanostructured materials represented a significant advantage as their magnetic character allows their separation for reuse in different successive sequential batch cycles.

Systemic sclerosis and microscopic polyangiitis after systemic exposure to silicone.

The relationship between silicon breast implants (SBIs) and autoimmune/inflammatory syndrome induced by adjuvants (ASIA) has been extensively analysed, with discordant results. We present a 45-year-old woman with confirmed systemic exposure to SBI who developed systemic sclerosis (SSc) followed by anti-neutrophil cytoplasmic antibody anti-myeloperoxidase vasculitis with renopulmonary syndrome. The novelty of our case is, first, confirmation of systemic exposure to SBI and, second, chronologic development of not one, but two severe autoimmune diseases. Controversy may still remain regarding SBIs and ASIA because it is unclear that previous studies confirmed systemic exposure to silicon in their cohort of patients.

Reusable Fe3O4/SBA15 Nanocomposite as an Efficient Photo-Fenton Catalyst for the Removal of Sulfamethoxazole and Orange II.

Today, the presence of recalcitrant pollutants in wastewater, such as pharmaceuticals or other organic compounds, is one of the main obstacles to the widespread implementation of water reuse. In this context, the development of innovative processes for their removal becomes necessary to guarantee effluent quality. This work presents the potentiality of magnetic nanoparticles immobilized on SBA-15 mesoporous silica as Fenton and photo-Fenton catalysts under visible light irradiation. The influence of the characteristics of the compounds and nanoparticles on the removal yield was investigated. Once the key aspects of the reaction mechanism were analyzed, to evaluate the feasibility of this process, an azo dye (Orange II) and an antibiotic (sulfamethoxazole) were selected as main target compounds. The concentration of Orange II decreased below the detection limit after two hours of reaction, with mineralization values of 60%. In addition, repeated sequential experiments revealed the recoverability and stability of the nanoparticles in a small-scale reactor. The benchmarking of the obtained results showed a significant improvement of the process using visible light in terms of kinetic performance, comparing the results to the Fenton process conducted at dark. Reusability, yield and easy separation of the catalyst are its main advantages for the industrial application of this process.

Polymeric Ionic Liquids Derived from L-Valine for the Preparation of Highly Selective Silica-Supported Stationary Phases in Gas Chromatography.

A series of silica-supported polymeric ionic liquid (PIL)-based stationary phases derived from a vinylic L-valine ionic liquid monomer and divinylbenzene (DVB) as the crosslinking agent have been prepared and studied as gas chromatographic stationary phases. These coated gas chromatographic columns exhibited good thermal stabilities (230-300 °C) and high efficiencies (1700-2700 plates/m), and were characterized using a linear solvation parameter model in order to understand the effects of the amount of DVB on the features of the resulting composite systems. Their retention behavior and separation efficiencies were demonstrated using the Grob test. By tuning the crosslinking degree for the IL-derived stationary phase, the separation selectivity and resolution of different compounds were improved. The different retention behaviors observed for many analytes indicate that these stationary phases may be applicable as new types of GC stationary phases.