Homogeneous Diffusion Solid Model as a Realistic Approach to Describe Adsorption onto Materials with Different Geometries.

In this work, the adsorption kinetics of p-nitrophenol (PNP) onto several commercial activated carbons (ACs) with different textural and geometrical characteristics was studied. For this aim, a homogeneous diffusion solid model (HDSM) was used, which does take the adsorbent shape into account. The HDSM was solved by means of the finite element method (FEM) using the commercial software COMSOL. The different kinetic patterns observed in the experiments carried out can be described by the developed model, which shows that the sharp drop of adsorption rate observed in some samples is caused by the formation of a concentration wave. The model allows one to visualize the changes in concentration taking place in both liquid and solid phases, which enables us to link the kinetic behaviour with the main features of the carbon samples.

Adsorption of p-nitrophenol on activated carbon fixed-bed.

Carbon fixed-beds are usually used to remove organic contaminants. Adsorption in a carbon filter is a dynamic, non-steady process which is not yet completely understood. The objective of this paper is to establish a methodology to simplify the study of this process based on the wave theory, rapid small-scale column test and experimental design/surface response analysis. The constant pattern wave hypothesis was confirmed by the experimental data. The influence of the inlet concentration of p-nitrophenol and the flow rate on dynamic adsorption was studied at 20 degrees C following a central composite design using a second-order model. Both parameters have an important influence on the response variables studied. The methodology used is a useful tool for studying the dynamic process and shows interactions that are difficult to verify by the classical step-by-step method.

Determination of the energy potential of gases produced in the pyrolysis processes of the vegetal carbon manufacture industry.

In this work, a pyrolysis plant located in Valverde de Leganes, Badajoz (SW Spain) was studied. At present, only the solid phase obtained by pyrolysis finds an application as domestic fuel. In order to analyze the feasibility of a further energetic exploitation of the plant under study, the gases flowing through the chimneys were collected at different times throughout the pyrolysis process. Next, they were characterized and quantified by gas chromatography, the energy potential of each of the gases being determined. According to the results obtained in this study, a total energy potential of 5.6 x 10(7) MJ (i.e., 1.78 MW(t)) might be generated yearly. Hence, considering an overall process yield equal to 20%, up to 358 KW(e) would be produced. This power would supply enough electric energy to the industry, the remaining being added to the common electric network.

Ionic surfactant adsorption onto activated carbons.

The adsorption of sodium dodecyl sulfate onto a set of activated carbons from aqueous solutions has been studied in the low concentration range. The adsorption isotherms are reasonably well fitted by a double Langmuir equation but the calorimetry of adsorption enthalpies shows a rather wide distribution of energies. This distribution is related to direct adsorbate-adsorbent interactions in pores of different size, without noticeable contributions from the chemical nature of the surface. The adsorbate-adsorbent interaction free energy through water is evaluated using the model proposed by van Oss and co-workers for the interfacial free energy. The obtained results indicate that the calculated free energy is in good agreement with that found from application of the double Langmuir equation to the adsorption isotherms.

Free energy of interaction of sodium dodecyl sulfate in aqueous solution with carbon black surfaces.

The free energy of the adsorption process of an ionic surfactant from aqueous solutions onto a set of carbon blacks in the range of low concentrations was evaluated using the model proposed by van Oss and co-workers. The obtained results indicated that the free energy of interaction between adsorbent and adsorbate through water results mainly from Lifshitz-van der Waals and electrostatic interactions, and its value showed a good correspondence with that previously found from a combination of the classical measurements of adsorption isotherms and the Langmuir model.

Analysis of the Silica Surface Free Energy by the Imbibition Technique.

The surface free energy of silica and its components have been evaluated from imbibition experiments performed with liquids of differing surface properties by the distance-time method. Data were analyzed by a parabolic fit to Washburn's equation, because of the uncertainty in the exact position and time at which penetration begins in these kinds of experiments. In addition to the mathematical treatment of the experimental results, the influence of the components and parameters of the surface tension of the liquids used on the values of the solid surface free-energy components has been analyzed. Copyright 2001 Academic Press.

Influence of the Meniscus at the Bottom of the Solid Plate on Imbibition Experiments.

The analysis of the experiments on liquid imbibition into porous solids carried out by using the increase of weight technique proves the influence that meniscus formation has on the experimental increase of weight when the bottom of the porous layer is put in contact with the free surface of the liquid used to perform the penetration experiments. This process (meniscus onset) has a temporary dependence due to the change of the distance between the inferior base of the plate and the free surface of the liquid as a result of the imbibition. We have also found the proper experimental conditions under which such temporary dependence can be minimized after a short time after the start of contact between the porous layer and the free surface of the liquid utilized in the penetration procedure. Thus, the weight increase because of the meniscus formation can be assumed as a constant during the greatest part of the experiments, allowing the use of the proper mathematical form of Washburn's equation in order to describe the imbibition of the liquid into the pores of the solid. Copyright 2001 Academic Press.