Vertical Mouth Opening Requirements for CAD/CAM Fully Guided Implant Surgery: An Analysis of Different Implant Systems.

PURPOSE: To determine the vertical space required for implant osteotomy preparation when utilizing a CAD/CAM fully guided surgical template. MATERIALS AND METHODS: A total of 14 surgical osteotomy drills (individual and sequential drills) were collected and measured individually using a digital caliper, as well as the total length when the drills were positioned in a surgical handpiece. The height of the surgical guide sleeves and the offset of 14 implant systems in the market were also collected. RESULTS: The vertical dimension of the drills included in this study ranged from 28.2 to 46.3 mm. When these drills were inserted into the handpiece, the total length ranged from 30.0 to 49.5 mm. The height of the surgical guide sleeve and the offset required for the guide had a range of 3.2 to 7.0 mm and 5.0 to 13.5 mm, respectively. This dimension resulted in the total vertical space required for CAD/CAM fully guided surgical templates for each implant system, which ranged from 30.0 to 58.5 mm. CONCLUSIONS: Limited mouth opening can pose challenges and limitations in both guided and nonguided dental implant surgery. It can affect the accessibility of surgical implant placement and may result in increased patient discomfort, surgical implant positioning errors, and postoperative complications. Clinicians should determine the patient's mouth opening capabilities during the treatment planning phase prior to deciding on the appropriate implant system to be used and the implant placement technique.

Proposal regarding horizontal and vertical positioning of single implants placed in healed sites: Effect on cervical crown form and the need for bone grafting.

STATEMENT OF PROBLEM: When single implants are placed in healed sites, guidelines are lacking on the horizontal and vertical implant positions that optimize cervical crown form and the implant locations that would require bone grafting to develop the optimal crown form. PURPOSE: The purpose of this clinical study was to evaluate the cervical contour of wax patterns formed on casts of single implants placed in healed sites and to determine which horizontal and vertical implant positions produced the best cervical crown form and which indicated the need for bone grafting. MATERIAL AND METHODS: Fifty-eight wax patterns were fabricated on casts where implants had been placed in healed sites without bone grafting. The wax patterns were subjectively assessed by 5 dental faculty members and 5 graduate students as having good, fair, or poor cervical crown form. Horizontal measurements were made between the facial surface of the implant and a round metal wire connecting the gingival zeniths of the adjacent teeth. Vertical measurements were also made between the wire and implant platform. The subjective assessments along with the horizontal and vertical implant position measurements were used to propose guidelines for optimal implant placement in healed sites. RESULTS: Horizontal distances of 2.0 to 3.0 mm produced good cervical crown contours, with distances >3.0 mm and <2.0 mm resulting in fair or poor assessments. Vertical distances of 3.0 to 4.0 mm were judged to have good cervical crown contour, whereas depths of 1.0 mm or less were assessed as poor. CONCLUSIONS: Based on the subjective assessment of wax patterns formed on casts of single implants placed in healed sites, a guideline of 2.0 to 3.0 mm is proposed for the horizontal distance between a line connecting the adjacent gingival zeniths and the facial surface of the implant. A vertical distance guideline of 3.0 to 4.0 mm is proposed between the adjacent gingival zeniths and the implant platform.

Proposal regarding potential causes related to certain complications with dental implants and adjacent natural teeth: Physics applied to prosthodontics.

PURPOSE: Complications can and do occur with implants and their restorations with causes having been proposed for some single implant complications but not for others. METHODS: A review of pertinent literature was conducted. A PubMed search of vibration, movement, and dentistry had 175 citations, while stress waves, movement, and dentistry had zero citations as did stress waves, movement. This paper discusses the physics of vibration, elastic and inelastic collision, and stress waves as potentially causative factors related to clinical complications. RESULTS: Multiple potential causes for interproximal contact loss have been presented, but it has not been fully understood. Likewise, theories have been suggested regarding the intrusion of natural teeth when they are connected to an implant as part of a fixed partial denture as well as intrusion when a tooth is located between adjacent implants, but the process of intrusion, and resultant extrusion, is not fully understood. A third complication with single implants and their crowns is abutment screw loosening with several of the clinical characteristics having been discussed but without determining the underlying process(es). CONCLUSIONS: Interproximal contact loss, natural tooth intrusion, and abutment screw loosening are common complications that occur with implant retained restorations. Occlusion is a significant confounding variable. The hypothesis is that vibration, or possibly stress waves, generated from occlusal impact forces on implant crowns and transmitted to adjacent teeth, are the causative factors in these events. Since occlusion appears to play a role in these complications, it is recommended that occlusal contacts provide centralized stability on implant crowns and not be located on any inclined surfaces that transmit lateral forces that could be transmitted to an adjacent tooth and cause interproximal contact loss or intrusion. The intensity, form, and location of proximal contacts between a natural tooth located between adjacent single implant crowns seem to play a role in the intrusion of the natural tooth. Currently, there is a lack of information about the underlying mechanisms related to these occurrences and research is needed to define any confounding variables.

Effects of cyclic loading on loss of abutment screw torque of angled screw channel single implant crowns on narrow diameter implants.

STATEMENT OF PROBLEM: Screw access channels that emerge on the facial aspect of anterior screw-retained implant crowns can compromise esthetics. Recently, angled screw channels (ASCs) have been developed that can alter screw access channel angulations to improve esthetics. While ASCs can be used on narrow-diameter implants, information is limited on the loss of abutment screw torque on narrow-diameter implants with ASCs. PURPOSE: The purpose of this in vitro study was to compare the loss of abutment screw torque after thermocycling and the cyclic loading of ASCs from 3 different companies connected to narrow-diameter implants. MATERIAL AND METHODS: A total of 40 narrow-diameter implants (NobelReplace Conical Connection 3.5×11.5 mm) were mounted individually in acrylic resin blocks and divided equally into 4 groups. The first group, NB-0 (Control), consisted of screw-retained zirconia crowns fabricated on ASCs at 0-degree angulation (n=10). The other 3 groups consisted of a total of 30 screw-retained zirconia crowns fabricated on ASCs at 20-degree angulation: NB-20 (Angulated Screw Channel Solutions), ATL-20 (Atlantis Custom Base Solution with angulated screw access), and DA-20 (Dynamic TiBase). Each crown was secured on the mounted implant with its corresponding titanium base insert and screw and then tightened to the manufacturer's recommended torque with a digital torque gauge. The initial reverse torque value (RTVI) was obtained and recorded at baseline. Subsequently, a new set of screws were tightened to recommended values, and each specimen underwent thermocycling and then cyclic loading at 0 to 100 N at 10 Hz for 1 million cycles to simulate 1year of functional loading. After cyclic loading, the final reverse torque values (RTVF) were recorded and compared with the RTVI to evaluate the percentage torque loss (PTLF). Statistical analysis was performed using the Kruskal-Wallis analysis, Rank base analysis of covariance (ANCOVA), and the Tukey HSD post hoc comparisons (α=.05). RESULTS: Significant differences were found for the PTLF among all groups after cyclic loading (P<.001). The PTLF in ATL-20 (51.4%) was significantly higher than in NB-0 (22.2%) (P<.001) and NB-20 (29.2%) (P=.010). No significant difference was found in the PTLF among other groups (P>.05). CONCLUSIONS: The abutment screw torque loss after cyclic loading of the ASCs on narrow diameter implants among the 4 groups did not perform comparably. The largest percentage torque loss was recorded for the ATL-20 group. The NB-20 group demonstrated the lowest percentage torque loss. DA-20 showed percentage torque loss less than ATL-20; however, its RTVF was the lowest.

Evaluation of Marginal and Internal Fit of Ceramic Laminate Veneers Fabricated with Five Intraoral Scanners and Indirect Digitization.

The long-term success of ceramic laminate veneers (CLVs) is influenced by the marginal and internal fit of the restorations. However, studies comparing the fit of CLVs using different intraoral scanners or the indirect digitization technique are lacking. The purpose of this study was therefore to assess the marginal and internal fit of CAD/CAM-milled CLVs using different intraoral scanners and the indirect digitalization technique. An ivorine typodont maxillary left-central incisor was prepared; the tooth and the neighboring teeth were scanned and used as a template to print ninety 3D partial models. Thereafter, ceramic laminate veneers (CLVs) (N = 90) were milled from IPS-Emax CAD blocks and divided into six equal groups (15 specimens each) according to the type of intraoral scanner (IOS), as follows: Omnicam IOS, SC3600 IOS, Trios 3 IOS, Emerald IOS, I500 IOS. Fifteen further CLVs were fabricated using the conventional indirect digitalization technique. After cementation on the resin dies and embedding in clear epoxy resin, specimens were sectioned inciso-gingivally and mesio-distally. At the incisal and cervical positions, the marginal discrepancy was measured and evaluated in addition to the internal gap at six locations using SEM (200×). Differences between gap measurements among the six groups were determined using ANOVA. Games-Howell multiple comparisons for homogenous variances and LSD multiple comparisons for non-homogenous variances were used with 95% confidence intervals. The significance level was set at 0.05. The lowest mean absolute marginal gap at the incisal margins (AMGI) was recorded for Omnicam group (203.28 ± 80.14) µm, while the highest mean absolute marginal gap at the cervical margins (AMGC) was recorded for Omnicam group (147.16 ± 59.78) µm. The mean AMGC was reported to be significantly different between the conventional technique (146.75 ± 38.43) µm and Trios 3 (91.86 ± (35.51) µm; p = 0.001) and between Emerald (112.37 ± (50.31) µm; p = 0.042) and I500 (86.95 ± (41.55) µm; p < 0.001). The mean MGI was found to be significantly different between the conventional technique (114.11 ± (43.45) µm and I500 group (186.99 ± (73.84) µm) only (p = 0.035). However, no significant differences were found in the mean MGI between all types of IOSs. The means of AMG and MG were significantly different at incisal or cervical areas between the conventional technique and IOSs and within the scanner groups (p > 0.05). Marginal gaps were higher in the incisal region compared to the cervical region with both the indirect digitization technique and the IOSs. Ceramic laminate veneers (CLVs) fabricated using IOSs produced overall internal and marginal fit adaptation results comparable to CLVs fabricated from the indirect digitalization method, and both techniques produced clinically acceptable results.

Selecting a Virtual Articulator: An Analysis of the Factors Available with Mechanical Articulators and their Potential Need for Inclusion with Virtual Articulators.

The ever-expanding world of digital technology has produced many changes, including the availability of virtual articulators. The use of such digital technology requires an understanding of the features that have been available with different mechanical articulators. These features include such items as facebow, intercondylar distance, incisal guide table, condylar inclination, reference plane, lateral condylar inclination, immediate mandibular translation, and ability to verify a centric relation record. This paper reviews the adjustable features that have been available with different types of mechanical articulators so that clinicians can determine if these features should be included in the virtual articulators they choose to use. Regardless of whether one is utilizing a mechanical or virtual articulator, the rationale for which type of articulator to select is the same and is predicated on the needs of the patient, the occlusal philosophy of the clinician, and the required accuracy.

Noncarious cervical lesions: Morphology and progression, prevalence, etiology, pathophysiology, and clinical guidelines for restoration.

PURPOSE: To synthesize the literature regarding noncarious cervical lesions (NCCLs) and propose clinical guidelines when lesion restoration is indicated. MATERIAL AND METHODS: A PubMed search was performed related to NCCL morphology, progression, prevalence, etiology, pathophysiology, and restoration. RESULTS: NCCLs form as either rounded (saucerlike) depressions with smooth, featureless surfaces that progress mainly in height or as V-shaped indentations that increase in both height and depth. Prevalence ranges from less than 10% to over 90% and increases with age. Common locations are the facial surfaces of maxillary premolars. They have a multifactorial etiology due to personal habits such as excessive horizontal toothbrushing and consumption of acidic foods and drinks. Occlusal factors have been identified as contributing to the prevalence of NCCLs in some studies, whereas other studies indicate there is no relationship. The concept of abfraction has been proposed whereby mechanical stress from occlusal loading plays a role in the development and progression of NCCLs with publications supporting the concept and others indicating it lacks the required clinical documentation. Regardless of the development mechanism, demineralization occurs and they are one of the most common demineralization diseases in the body. Treatment should be managed conservatively through preventive intervention with restorative treatment delayed until it becomes necessary due to factors such as lesion progression, impact on patient's quality of life, sensitivity, poor esthetics, and food collection may necessitate restoration. Composite resins are commonly used to restore NCCLs although other materials such as glass ionomer and resin-modified glass ionomer are also used. Sclerotic dentin does not etch like normal dentin and therefore it has been recommended to texture the dentin surface with a fine rotary diamond instrument to improve restoration retention. Some clinicians use mechanical retention to increase retention. Beveling of enamel is used to increase the bonding area and retention as well as enhance the esthetic result by gradually creating a color change between the restoration and tooth. Both multistep and single-step adhesives have been used. Dentin etching should be increased to 30 seconds due to the sclerotic dentin with the adhesive agent applied using a light scrubbing motion for 20 seconds but without excessive force that induces substantial bending of a disposable applicator. Both flowable and sculptable composite resins have been successfully used with some clinicians applying and polymerizing a layer of flowable composite resin and then adding an external layer of sculptable composite resin to provide enhanced resistance to wear. When caries is present, silver diamine fluoride has been used to arrest the caries rather than restore the lesion. CONCLUSIONS: Noncarious cervical lesions (NCCLs) form as smooth saucerlike depressions or as V-shaped notches. Prevalence values as high as 90% and as low as 10% have been reported due to habits such as excessive toothbrushing and an acidic diet. Occlusal factors have been proposed as contributing to their presence but it remains controversial. Publications have both supported and challenged the concept of abfraction. They are one of the most common demineralization diseases in the body. Conservative treatment through prevention is recommended with restorative treatment delayed as long as possible. When treatment is needed, composite resins are commonly used with proposed restorative guidelines including texturing the sclerotic dentin, beveling the enamel, potential use of mechanical retention, 30 seconds of acid etching, and use of either multistep or single-step adhesives in conjunction with a light scrubbing motion for 20 seconds without excessive force placed on disposable applicators.

Additive Manufacturing for Complete Denture Fabrication: A Narrative Review.

PURPOSE: To evaluate and compare the benefits and limitations of additive manufacturing for complete denture fabrication. METHODS: A PubMed and Google Scholar search for topics pertaining to additive manufacturing for complete dentures was performed. The resulting articles were then divided into topics to allow a narrative review. DISCUSSION: Determining how printing compares with conventional and milled dentures is critical for the widespread adoption of this fabrication technique. Physical properties, denture tooth bond strength, denture base adaptation and soft-liner bond strength are discussed to establish how printing compares. CONCLUSIONS: Printing offers many advantages over milled and conventionally processed dentures; however, many questions need to be answered by research. The advantages include reduced cost of most printers compared to milling machines, less material waste, ability to print multiple dentures simultaneously, and complex designs can be fabricated that otherwise could not be milled. Current research has shown flexural strength, fracture toughness, color stability, and denture base adaptation are reduced for printed dentures when compared with milled dentures. Print orientation has been shown to influence accuracy, strength, surface roughness and C. albicans adherence which is not seen with conventional or milled denture materials. These factors do not represent a criticism of printing but rather indicate the need for more research with this new and promising denture fabrication technique. Since printing offers numerous benefits to complete denture fabrication it is likely to have a more significant role in complete denture fabrication in years to come as knowledge increases and materials/techniques continue to advance.

Reducing the need to maintain fixed complete dentures by providing gold occlusal surfaces: A clinical report.

The excessive occlusal wear of complete-arch implant-supported prostheses made with metal and acrylic resin is a clinical complication that can require repeated maintenance in certain patients. A patient who presented with moderate occlusal wear of the prosthetic teeth and substantial fracture of the maxillary anterior acrylic resin base only 2 years after a previous replacement of the acrylic resin base and denture teeth is described. Because of the patient's history and existing wear, both the maxillary and mandibular prostheses were repaired by replacing the acrylic resin bases and resin denture teeth but with the addition of cast gold occlusal surfaces on the posterior prosthetic teeth. The provided treatment helped this patient, who was likely to need more frequent maintenance visits in the future because of his history of accelerated occlusal wear and increased occlusal force.

Comparison of Different Clinical Decision Support Tools in Aiding Dental and Medical Professionals in Managing Primary Dentition Traumatic Injuries.

BACKGROUND: Many patients are taken to the emergency room for dental trauma treatment, but studies reveal that medical professionals do not feel confident in diagnosing and treating children with traumatic dental injuries. The purpose of this study was to determine if a clinical decision support tool (CDST) would improve dental trauma knowledge of primary teeth in medical students and pediatric dentists. Another purpose was assessing effectiveness of print and mobile app CDSTs. METHODS: Medical students (n = 100) and pediatric dentists (n = 49) were given a pretest to assess baseline dental trauma knowledge. All subjects were randomly assigned to 1 of 3 groups for the posttest: no CDST, print CDST, and mobile app CDST. Test scores and total time spent on each test were recorded and analyzed. RESULTS: Compared with medical students, pediatric dentists scored significantly higher in both pretest (8.57 ± 0.96 vs 4.20 ± 1.58; P < 0.001) and posttest (8.37 ± 1.09 vs 4.96 ± 1.99; P < 0.001). There was no significant difference in time spent to complete the 2 tests between both groups. Medical students and pediatric dentists who utilized the mobile app CDST had scored highest (P = 0.028) but took the longest time (P < 0.001) on the posttest. CONCLUSIONS: Both print and mobile app CDSTs improved diagnosing and managing traumatic dental injuries in primary dentition significantly compared with those without aid. Medical students with CDSTs showed significant improvement in managing primary dental trauma; therefore, it is recommended for better, more accurate diagnosis and treatment in patients.

Heat and Sound Generation During Implant Osteotomy When Using Different Types of Drills in Artificial and Bovine Bone Blocks.

The purpose of this study was to compare heat and sound generated during implant osteotomy when different types of drill were used in artificial bone and bovine bone blocks. A total of 80 implant osteotomies were formed using 4 implant drilling systems: N1 (OsseoShaper) (Nobel), NobelActive (Nobel), V3 (MIS), and BLX (Straumann) in both artificial bone and bovine bone blocks. Thermocouple probes were used to record temperature change at the depths of 5.0 mm and 13.0 mm of each implant osteotomy formed by the final drill. In addition, thermographic images, drilling sound, and drilling time were recorded and evaluated. Statistical analyses were performed at α = 0.05. The mean temperature changes as recorded by thermocouple probes and thermocamera were significantly lower in OsseoShaper than most other drill-bone combinations (P < .05). The mean drilling times and sound generation for OsseoShaper were significantly higher and lower than most other drill-bone combinations (P < .05), respectively. Minimal heat and sound generation can be expected when implant osteotomies are performed using OsseoShaper at a low rotational speed (50 rpm) even without irrigation. However, extended drilling time is required.

Conversion of Digital Dentures for Immediate Loading of Complete Arch Implant Prostheses.

The development and expanded use of digital dentures has led to their use in the immediate loading of complete arch implant prostheses. This paper reviews the prosthetic complications that can occur with immediately loaded conversion prostheses along with the advantages afforded by digital dentures in minimizing or eliminating these complications. The process of using digital dentures in the fabrication of conversion dentures for immediate loading of complete arch implant prostheses is presented as well as the use of digital dentures for definitive prostheses. The described procedures include methods of obtaining clinical records, the fabrication of conversion dentures, the immediate loading procedure using a conversion prosthesis, and use of a conversion denture in the fabrication of a definitive prosthesis.

What Occlusal Scheme Should Be Used with Removable Partial Dentures?

PURPOSE: Multiple clinical studies have been published comparing different philosophies of complete denture occlusion and different types of denture teeth. However, it is unclear whether comparable data are available for occlusal schemes used with removable partial dentures (RPDs). Therefore, this review investigated the dental literature related to occlusal schemes for RPDs. MATERIALS AND METHODS: A PubMed search of English language articles was performed using the term "removable partial denture, occlusion" with 765 results. When the term "occlusion in removable partial prosthodontics" was used there were 784 results. Seventy-four articles were identified using the different search term of "RPD, occlusion" while use of the term "occlusal scheme, with removable partial dentures" listed 18 publications. The term "removable partial denture, occlusion, literature reviews" produced 38 potential publications related to the topic. Using the term "removable partial denture occlusion systematic review" resulted in 2 citations. Using the term "RPD occlusion literature review" resulted in one foreign language manuscript whereas using the term "RPD occlusion systematic review" resulted in one article unrelated to dentistry. The term "clinical studies of RPD occlusion" produced 5 results with none related to the topic. There were 23 results using the term "clinical studies of removable partial denture occlusion" with one potentially related to RPD occlusal schemes. RESULTS: A review of the titles and abstracts revealed 12 articles that appeared to contain specific information about the occlusal scheme used with RPDs. Following a detailed review of those publications, only 4 contained recommendations for RPD occlusion and were included in this review. The available information regarding the recommendations for occlusal schemes in these articles was based on expert opinion. A decision was made to include a hand search of 9 textbooks containing varying amounts of information related to occlusal schemes for RPDs, but no evidence-based references related to RPD occlusal schemes were found in the textbooks. Since this entire review is based on expert opinion, no attempt was made to critique the opinions expressed by these authors but rather to present their perspectives for evaluation by readers. CONCLUSIONS: The occlusion developed with RPDs should be physiologically harmonious, allowing the supporting structures to remain in a good state of health with functional stress distributed among all the occluding teeth. Multiple authors indicate the occlusion in maximum intercuspation/centric occlusion should incorporate bilateral posterior contacts with no deflective occlusal contacts. When most occlusal contacts on natural teeth are missing, it has been proposed that extension base RPDs have their occlusal contacts developed in centric occlusion. Regarding eccentric occlusal relationships, a balanced occlusal scheme has been recommended by multiple authors with one author advocating use of a lingualized balanced. An anterior guided (canine-protected) occlusion has also been recommended when the canines are present and not periodontally compromised. When RPDs oppose a complete denture, several authors indicate a bilateral balanced occlusion should be used to help stabilize the complete denture.

Frankfort Mandibular Plane Angle: Critically Appraised Topic (CAT).

PURPOSE: The objective of this Critically Appraised Topic was to determine the level of evidence relative to the usefulness of the Frankfort mandibular plane angle in prosthodontic treatment. MATERIALS AND METHODS: The Patient Intervention Comparison Outcome (PICO) mesh heading received zero PubMed references, as did Frankfort Mandibular Plane Angle (FMA) as a determinant for dental occlusion and Frankfort Mandibular Plane Angle as a determinant of the occlusal scheme. Frankfort Mandibular Plane Angle alone received 168 PubMed citations that highlighted 2 DiPietro articles and a third from the orthodontics literature which was a Randomized Controlled Trial not relevant to the PICO. Four others, three prosthodontic and one orthodontic publication, were related to the PICO. A Google search revealed one additional article, which was a narrative review. RESULTS: Nine articles were related to the search, 2 of which were clinical trials that revealed no evidence to support the use of FMA as a diagnostic test. CONCLUSION: Based on the limited data presented above, there is a lack of evidence to support the use of FMA as a diagnostic procedure to predict outcomes, or dictate prosthodontic treatment.

Occlusal Vertical Dimension: Best Evidence Consensus Statement.

PURPOSE: Patients in need of extensive prosthodontic treatment may need restoration of their occlusal vertical dimension (OVD) due to tooth wear, tooth loss, or changes that have occurred to existing prostheses over time. Prosthodontic treatment is based on the clinical application of the available evidence regarding interocclusal distance (IOD), the positional stability of rest vertical dimension (RVD), and the effect of altering the OVD. Hence, the purpose of this consensus document is to examine available data related to IOD, RVD, and alteration of the OVD. MATERIALS AND METHODS: The search was limited to Clinical trials, Randomized Controlled Trials, Systematic Reviews and Meta-analyses. Key words were healthy patient, mean, range, interocclusal rest distance; healthy patient, mean, range, freeway space; and dentistry, interocclusal gap, and no citations appeared. Dentistry, interocclusal distance, revealed 5 not relevant citations. Dentistry, inter occlusal rest space, and dentistry, interocclusal rest distance, both had the same single not relevant citation. Dentistry, freeway space revealed over 7,000 citations. Dentistry, occlusal vertical dimension, revealed 253 citations, 7 of which were related to the search question but only 1 which was different from the previous search. Mandible, rest vertical dimension, age changes, found 7 citations, none relative to the question. Expanding the search to include journal article found 260 citations with only one relevant to the question. Mandible, rest vertical dimension, alteration, harm revealed no citations; mandible, occlusal vertical dimension, alteration, revealed 15 citations, 1 of which was relevant; mandible, occlusal vertical dimension, changes, revealed 75 citations, none of which were relevant; mandible, occlusal vertical dimension, rehabilitation revealed 10 citations, none of which were relevant. Expanding the search strategy to include Journal article, mandible, occlusal vertical dimension, alteration, received 159 citations, 4 of which were relevant; mandible, occlusal vertical dimension, restoration revealed 208 citations, 1 of which was relevant. Numerous other articles were culled by going through the reference lists of the aforementioned articles. RESULTS: For IOD, 27 articles were found relevant to the search question, which confirmed a mean of 3.0 mm with ranges from 1 to 9 mm. Five articles revealed little evidence as to whether the RVD changes during life. For OVD, 20 articles, including 4 systematic reviews, revealed some evidence that skeletal growth continues from mid adolescence into mid adulthood; strong anecdotal evidence that some unopposed teeth will continue to erupt; no clinical evidence to support the concept that abraded teeth in occlusion in a patient with bruxism will undergo continuous eruption; and some evidence from clinical case reports that restoring OVD in patients with severe abrasion is a successful treatment. CONCLUSIONS: There is a range of dimensions for the interocclusal distance (IOD) with many normal dental patients functioning with a higher or lower IOD than the commonly used 3.0 mm average dimension. The resting vertical dimension (RVD) is a 3-dimensional range with little evidence related to changes in the RVD during life. However, aging can cause a decrease in muscle tone which could affect the RVD. The restoration of the OVD can be successfully accomplished if proper diagnosis and treatment planning are performed.

Occlusal Schemes for Implant Restorations: Best Evidence Consensus Statement.

PURPOSE: Numerous studies have focused on the various complications with implant-retained restorations and a common thread in these publications is the potential for occlusal overload. The purpose of this Best Evidence Consensus Statement on implant occlusal schemes was to review the literature to determine the level of scientific evidence upon which the articles are based. MATERIALS AND METHODS: Limiting the search to Clinical trials, Randomized Controlled Trials, Systematic Reviews, Meta-analyses, the key words: dental implants, occlusion, found no citations. Expanding the search to Journal articles found 1,483 results, 20 of which pertained to the question. Doing a similar search including Journal Articles, the key words: dental implants and occlusal scheme found 47 citations, 17 of which were pertinent to the question. RESULTS: After eliminating duplicates and non-relevant articles, 15 were included in the review. Nineteen additional articles were culled by going through the reference lists in the aforementioned articles. CONCLUSIONS: There is a lack of scientific evidence regarding the occlusal scheme utilized with implant restorations that will minimize or eliminate complications. In light of this lack of scientific evidence, the style of occlusion a practitioner utilizes with tooth or mucosal supported prostheses may be used with implant-supported restorations until compelling evidence dictates otherwise.

Bruxism: Best Evidence Consensus Statement.

PURPOSE: The purpose of this Best Evidence Consensus Statement is to report on the prevalence, potential causes or association, treatment and cure of bruxism. MATERIALS AND METHODS: A literature search limited to Clinical Trials, Randomized Controlled Trials, Systematic Reviews and Meta Analyses, with the key words bruxism, and prevalence identified 22 references, bruxism and causation 21, bruxism, and treatment 117, and bruxism and cure none. RESULTS: Prevalence received 5 references which were relevant to the question researched. Causation received 11 relevant references, treatment 34 relevant references and cure none. Eighteen additional references were culled from the reference lists in the aforementioned articles. CONCLUSIONS: Due to variations in demographics and the dependence on anamnestic data, the true prevalence of bruxism in any specific population is unknown. There is moderate evidence that psychosocial factors such as stress, mood, distress, nervousness, and feeling blue are associated with sleep bruxism (SB) as well as caffeine, alcohol, and smoking. There is no consensus on what symptoms of SB or awake bruxism (AB) should be treated. There is some evidence that occlusal devices and bio feedback therapies can be utilized in SB treatment. There is conflicting evidence in the use of Botulinum toxin A and no compelling evidence for the use of drug therapy to treat SB. There is not an established cure for bruxism. The clinician is best served in using caution in the dental rehabilitation of patients with severe occlusal wear.

Abutment screw torque changes with straight and angled screw-access channels.

STATEMENT OF PROBLEM: Angle-correcting options allow the use of screw-retained implant prostheses in situations where an implant has been placed with a facial inclination. However, manufacturers have different recommended torque values, and it is unclear whether the performance of these designs is equivalent to that of the traditional screw-retained crowns (SRCs) when subjected to cyclic loading forces. PURPOSE: The purpose of this in vitro study was to compare torque differences between conventional straight-line screw access and angulated access SRCs before and after simulated functional loading. MATERIAL AND METHODS: Five groups consisting of 10 SRCs and implants were formed: Nobel Biocare zirconia crowns with 20-degree access channels (NB-20); Dynamic Abutment Solution zirconia crowns (DA-20) with 20-degree access channels; Core3dcentre angle correction zirconia crowns with 20-degree access channels (C3D-20); Nobel Biocare zirconia crowns with 0-degree access channels (NB-0); and gold alloy crowns cast to Nobel Biocare Gold-Adapt abutments (GA-0). Each specimen underwent thermocycling before cyclic loading. A preload torque based on the manufacturer's recommendation was applied to each crown placed on an implant. Reverse torque measurements were obtained for each specimen before cyclic loading. Each implant-abutment assembly was then cyclic loaded at 0 to 100 N at 10 Hz for 1 million cycles. Reverse torque measurements were obtained after cyclic loading and the percentage difference calculated. RESULTS: No significant percentage torque loss differences were observed between the 0-degree and 20-degree SRCs after cyclic loading. No significant differences were seen among the angulated access channel crowns. DA-20 and C3D-20 specimens had significantly higher torque loss compared with the NB-0 group. The C3D-20 group reported the largest percentage torque loss (34.5%) among the angulated access screw channel groups. The GA-0 group reported the largest percentage torque loss of all the groups (35.9%). No crown mobility or other complications were observed in any of the groups after cyclic loading. CONCLUSIONS: Angulated access channel crowns performed comparably with conventional straight-line screw access SRCs with regard to percentage torque values after cyclic loading. Angulated access channel crowns with lower manufacturer recommended torque values had higher percentage torque differences.

CAD/CAM Complete Denture Systems and Physical Properties: A Review of the Literature.

PURPOSE: CAD/CAM complete dentures have increased in popularity and a wide variety of systems are currently available. These prostheses present many advantages for clinicians, technicians and patients. Subtractive manufacturing is used by most of the available systems while a few manufacturers use an additive manufacturing technique. This article describes the currently available systems and materials available for the fabrication of CAD/CAM complete dentures and reviews the literature relative to their physical properties. METHODS: A comprehensive review of the literature was completed to enumerate the currently available techniques to fabricate CAD/CAM complete dentures and discuss their physical properties. A search of English language peer-reviewed literature was undertaken using MEDLINE and PubMed on research articles published between 2000 and 2019. A hand search of relevant dental journals was also completed. RESULTS: The literature indicates the physical properties of CAD/CAM milled poly(methylmethacrylate) or PMMA as it is commonly described is superior to conventionally processed PMMA for the fabrication of complete dentures. CONCLUSION: The incorporation of CAD/CAM technology into complete denture design and fabrication streamlines the clinical and laboratory processes and provides improved physical properties that enhance denture quality.

Should Digital Complete Dentures Be Part of A Contemporary Prosthodontic Education?

Digital complete dentures should be incorporated into a contemporary dental school education due to factors that include the substantial increase in the number of scientific publications devoted to digital dentures, the increased number of companies producing these prostheses, and the expanded use by practitioners. These factors increased recently due to multiple advantages of digital dentures that are described. Based on positive clinical experiences with such prostheses, preclinical curriculum changes were made with examples presented of both didactic and laboratory courses that now include digital dentures. Perspectives are presented regarding online laboratory procedures where a substantial portion can be performed at home through remote instruction.