Modeling and validation of delivered fluence of a continuous Dean flow pilot scale UV system: monitoring fluence by biodosimetry approach.

The inactivation of pathogenic microorganisms in water and high transmittance liquid foods has been studied extensively. The efficiency of the process is relatively low for treating opaque liquid foods using traditional UV systems. This study evaluated the ability of UV-C light to inactivate foodborne pathogens in a simulated opaque fluid (6.5 to 17 cm-1) at commercial relevant flow rates (31.70, 63.40, 95.10 gph) using a pilot-scale Dean Flow UV system. In this study, a mathematical model for the prediction of delivered fluence was developed by the biodosimetry method. The results revealed that increased Reduction equivalent fluence (REF) rates were observed with increased flow rates due to additional turbulence. The experimental and calculated REF were well correlated with the UV-C absorption coefficient range of 6.5 to 17 cm-1 indicating efficient mixing in the reactor. REF scaled up linearly at experimental conditions as an inverse function of flow rate and absorption coefficient, and a linear mathematical model (R2 > 0.99, p < 0.05) to predict delivered REF was developed. The model was tested and validated against independent experiments using Salmonella Typhimurium and Bacillus cereus endospores. The predicted and experimental REF values were in close agreement (p > 0.05). It is demonstrated that the developed model can predict the REF, thus microbial inactivation of microbial suspensions in simulated fluid with the absorption coefficient of 6.5-17 cm-1 and flow rates of 31.70-95.10 gph. The pilot system will be field-tested against microorganisms in highly absorbing and scattering fluids.

Effect of UV-C irradiation on the inactivation kinetics of oxidative enzymes, essential amino acids and sensory properties of coconut water.

The impact of ultraviolet light (UV-C) irradiation on oxidative enzymes [Polyphenol oxidase (PPO) and Peroxidase (POD)], free essential amino acids and sensory profile of coconut water were investigated. PPO and POD activities were lost to 94 and 93%, respectively of its original value at fluence level of 400 mJ/cm2. Inactivation kinetics of both enzymes were fitted to nonlinear Weibull model with an increase in UV dosage with a high coefficient of determination (R2 > 0.97) and low root mean square error (RMSE < 0.06). No significant change was observed in all essential amino acids (p > 0.05) after UV-C treatment up to maximum delivered fluence of 400 mJ/cm2. Sensory attributes of coconut water up to a treated UV-C fluence level of 200 mJ/cm2 were well retained in terms of chosen descriptors (p > 0.05). This study allow to further investigate the development of UV-C light technology for inhibition of spoilage enzymes and prolonged shelf-life of low acid beverages.

Inactivation of Bacillus and Clostridium Spores in Coconut Water by Ultraviolet Light.

Bacterial spores are generally more resistant than vegetative bacteria to ultraviolet (UV) inactivation. The UV sensitivity of these spores must be known for implementing UV disinfection of low acid liquid foods. UV inactivation kinetics of bacterial spores in coconut water (CW) and distilled sterile water was studied. Populations of Bacillus cereus and Clostridium sporogenes dormant spores were reduced by more than 5.5 log10 at the UV-C photon fluence of 1142 µE·m-2 and 1919 µE·m-2 respectively. C. sporogenes spores showed higher UV-C resistance than B. cereus, with the photon fluence 300 µE·m-2 required for one log inactivation (D10) and 194 µE·m-2, respectively. No significant difference was observed in D10 values of spores suspended in the two fluid types (p > 0.05). The inactivation kinetics of microorganisms were described by log linear models with low root mean square error and high coefficient of determination (R2 > 0.98). This study clearly demonstrated that high levels of inactivation of bacterial spores can be achieved in CW. The baseline data generated from this study will be used to conduct spore inactivation studies in continuous flow UV systems. Further proliferation of the technology will include conducting extensive pilot studies.