Revamping of a Full-Scale Membrane Plant for Landfill Leachate Pretreatment Using Partial Nitritation.

This paper describes a case study involving a revamping of a full-scale membrane bioreactor that treats landfill leachate and other liquid wastes. The main change was the introduction of nitritation/denitritation in alternating cycles instead of the classic denitrification/nitrification process, together with the installation of fine bubble diffusers, a reduction in the volume of the biological compartment, and an increase in the equalization volume. The most significant results were obtained for the biological compartment, with a decrease in the specific energy consumption of 46.6%. At the same time, the removal efficiency of COD, BOD, and TN substantially remained the same before and after plant revamping, while the removal efficiency of TP increased over the years, reaching an average value of almost 71%. Regarding the ultrafiltration unit, the specific flux (or permeability) was characterized by an increasing trend. At the same time, the specific energy consumption of this section decreased by 9.4%. These results led to the conclusion that the changes introduced with the revamp led to a more stable process, a reduction in membrane fouling, and important energy savings.

A New Perspective on SPME and SPME Arrow: Formaldehyde Determination by On-Sample Derivatization Coupled with Multiple and Cooling-Assisted Extractions.

Formaldehyde (FA) is a toxic compound and a human carcinogen. Regulating FA-releasing substances in commercial goods is a growing and interesting topic: worldwide production sectors, like food industries, textiles, wood manufacture, and cosmetics, are involved. Thus, there is a need for sensitive, economical, and specific FA monitoring tools. Solid-phase microextraction (SPME), with O-(2,3,4,5,6-pentafluorobenzyl)-hydroxylamine (PFBHA) on-sample derivatization and gas chromatography, is proposed for FA monitoring of real-life samples. This study reports the use of polydimethylsiloxane (PDMS) as a sorbent phase combined with innovative commercial methods, such as multiple SPME (MSPME) and cooling-assisted SPME, for FA determination. Critical steps, such as extraction and sampling, were evaluated in method development. The derivatization was performed at 60 °C for 30 min, followed by 15 min sampling at 10 °C, in three cycles (SPME Arrow) or six cycles (SPME). The sensitivity was satisfactory for the method's purposes (LOD-LOQ at 11-36 ng L-1, and 8-26 ng L-1, for SPME and SPME Arrow, respectively). The method's linearity ranges from the lower LOQ at trace level (ng L-1) to the upper LOQ at 40 mg L-1. The precision range was 5.7-10.2% and 4.8-9.6% and the accuracy was 97.4% and 96.3% for SPME and SPME Arrow, respectively. The cooling MSPME set-up applied to real commercial goods provided results of quality comparable to previously published data.

Hydrothermal carbonization of digested sewage sludge: The fate of heavy metals, PAHs, PCBs, dioxins and pesticides.

Hydrothermal carbonization (HTC) is emerging as a promising technology for the management of sewage sludge. The fate of phytosanitary products, Polycyclic aromatic hydrocarbons (PAHs) and PCBs (Polychlorinated biphenyls) after HTC, as well as the formation of dioxins and furans, is still unclear. Moreover, only little information is available on the distribution of heavy metals and major nutrients between the hydrochars and the process water. Here, we aim to contribute to fill these gaps. HTC of sewage sludge from six different wastewater treatment plants has been carried out at 220 °C for 85 min. Feedstock, hydrochars and spent liquor have been then characterized and discussed. HTC is here proven to be a suitable technology for the immobilization of both heavy hydrocarbons and heavy metals, with the exception arsenic, which was also found in the spent liquor at a significant proportion (∼15-∼50%). DDD, DDT, DDE were detected in all sludge samples and their content was reduced by nearly one order of magnitude after the process. HTC is here proven to not be responsible at an appreciable extent of PCBs enrichment of the processed solids. Moreover, the sum of PCDDs and PCDFs in hydrochars never exceeded 20 ng kg-1 s.s. The results obtained encourage further developing of HTC, with the aim to improve the sustainability of sewage sludge management. Additional studies on the environmental impact of hydrochar when used as alternative fuel, as well as soil amendment, could lead to the overcoming of the issues which still hinder these applications.

Improved energy recovery from food waste through hydrothermal carbonization and anaerobic digestion.

Here we studied energy valorization of food waste by hydrothermal carbonization coupled with anaerobic digestion. Hydrothermal treatment was carried out at 200 °C and 230 °C for 1 h, obtaining hydrochar with properties suitable for solid biofuel according to ISO/TS 17225-8. The increase in temperature improved the fuel properties of hydrochar (higher heating value 20.3 and 23.7 MJ kg-1, fuel ratio 0.33 and 0.37, energy density 1.07 and 1.25). The anaerobic digestion of process water achieved methane yields around 150 mL CH4 STP g-1 CODadded and made it possible to remove some specific recalcitrant compounds, such as 2-methylpyridine and 2-ethyl-3-methylpyrazine. Energy recovery from hydrochar and process water seems to be an interesting alternative way to sustain the process energetically and economically, despite the significant energy inputs required for hydrothermal carbonization.

Rigid and film bioplastics degradation under suboptimal composting conditions: A kinetic study.

The present research investigates the degradation rate of bioplastics under various composting conditions, including suboptimal ones. Lab-scale tests were carried out setting three variables: temperature (37°C-58°C), humidity (30%-60%) and duration of the thermophilic and the maturation phases (15-60 days). The composting tests were carried out following modified guideline ISO 20200:2015 and lasted for 60 days. Bioplastics in the synthetic waste matrix consisted of Mater-Bi® film biobags and PLA rigid teaspoons. A kinetic study was performed, resulting in faster degradation rates for film bioplastics (first-order kinetics with k = 0.0850-0.1663 d-1) than for rigid (0.0018-0.0136 d-1). Moreover, film bioplastics reached a complete degradation within the 60 days of the test. Concerning the rigid products, 90% degradation would be achieved in 2-3 years for mesophilic conditions. Finally, in the undersieve of 0.5 mm some microplastics were identified with the ImageJ software, mainly relatable to rigid (PLA) bioplastics. Overall, the results disclosed that the combination of mesophilic temperatures and absence of moistening slowed down both the degradation and the disintegration process of bioplastics.

Treatment of NSAPs-rich petrochemical wastewaters using a two-stage combined process of fungi and activated sludge.

A two-stage biological process using fungi and bacteria was set-up and tested for treating a petrochemical wastewater containing naphthalene sulphonic acid polymers. The fungal treatment was carried out through a trickling filter inoculated with Pleurotus ostreatus attached on Luffa cylindrica acting as both physical support and carbon source. The fungal reactor was operated in non-sterile conditions setting two pH values (5 and 6) and two hydraulic retention times (2 d and 3 d). The effluent was then sent to an activated sludge reactor operating the second stage of the treatment. Using an HPLC-based technique, it was observed that the fungal reactor was capable of reducing the polymerization grade of naphthalene sulphonic acid polymers up to 35%, thus increasing significantly the biodegradability of the petrochemical wastewater, from the initial 9% to 46%. The two-stage process allowed to remove about 50% of the total COD much higher than 9% that can be achieved with activated sludge alone. The use of Luffa cylindrica as support for fungi allowed to limit bacterial contamination of the trickling filter and enhanced enzymatic production (on average 20 U/L of Laccase) without any release of non-biodegradable by-products in the effluent. Extraction and PCR-amplification of fungal DNA was carried out along with over 70 d running process in order to monitor the changes of the fungal community inside the reactors. Results showed that Meyerozyma, Fusarium and Thricoderma, spp. developed inside the reactor with Thricoderma, spp. representing the main constituent of fungal biomass at the end of the experiment.

A highly efficient multi-step methodology for the quantification of micro-(bio)plastics in sludge.

The present study develops a multi-step methodology for identification and quantification of microplastics and micro-bioplastics (together called in the current work micro-(bio)plastics) in sludge. In previous studies, different methods for the extraction of microplastics were devised for traditional plastics, while the current research tested the methodology on starch-based micro-bioplastics of 0.1-2 mm size. Compostable bioplastics are expected to enter the anaerobic or aerobic biological treatments that lead to end-products applicable in agriculture; some critical conditions of treatments (e.g. low temperature and moisture) can slow down the degradation process and be responsible for the presence of microplastics in the end-product. The methodology consists of an initial oxidation step, with hydrogen peroxide 35% concentrated to clear the sludge and remove the organic fraction, followed by a combination of flotation with sodium chloride and observation of the residues under a fluorescence microscope using a green filter. The workflow revealed an efficacy of removal from 94% to 100% and from 92% to 96% for plastic fragments, 0.5-2 mm and 0.1-0.5 mm size, respectively. The methodology was then applied to samples of food waste pulp harvested after a shredding pre-treatment in an anaerobic digestion (AD) plant in Italy, where polyethylene, starch-based Mater-Bi® and cellophane microplastics were recovered in amounts of 9 ± 1.3/10 g <2 mm and 4.8 ± 1.2/10 g ⩾2 mm. The study highlights the need to lower the threshold size for the quantification of plastics in organic fertilizers, which is currently set by legislations at 2 mm, by improving the background knowledge about the fate of the micro-(bio)plastics in biological treatments for the organic waste.

Phosphorus recovery from sewage sludge hydrochar: process optimization by response surface methodology.

Hydrothermal carbonization can play an innovative role in sewage sludge (SS) treatment and valorization, as well as in phosphorus recovery. In this study, leaching tests using nitric acid were performed on hydrochar from SS and the influence of pH (1-3.5), leaching time (30-240 min), and solid/liquid (S/L) ratio (5-20 wt%) was analyzed and optimized according to the Design of Experiments method, under the Response Surface Methodology approach. The highest phosphorus extraction yield (59.57%) was achieved at the lowest pH and the lowest S/L ratio, while an increase in temperature from 20 to 60 °C negatively affected the phosphorus recovery. Quadratic models, with the addition of semi-cubic terms, were found to best represent both phosphorus yield and ash content of the hydrochar after leaching. As observed by 3-dimensional surface responses, phosphorus yield increases as the pH decreases. The pH is the factor that most influences this response, while time has little influence. At pH 1, the yield increases as the S/L ratio decreases, while the S/L ratio only slightly affects the response at pH 3.5. At an S/L ratio of 12.5%, multi-objective optimization indicates that pH 1 and a leaching time of 135 min are the parameters that allow both maximum phosphorus yield and minimum ash content.

Towards an online mitigation strategy for N2O emissions through principal components analysis and clustering techniques.

Emission of N2O represents an increasing concern in wastewater treatment, in particular for its large contribution to the plant's carbon footprint (CFP). In view of the potential introduction of more stringent regulations regarding wastewater treatment plants' CFP, there is a growing need for advanced monitoring with online implementation of mitigation strategies for N2O emissions. Mechanistic kinetic modelling in full-scale applications, are often represented by a very detailed representation of the biological mechanisms resulting in an elevated uncertainty on the many parameters used while limited by a poor representation of hydrodynamics. This is particularly true for current N2O kinetic models. In this paper, a possible full-scale implementation of a data mining approach linking plant-specific dynamics to N2O production is proposed. A data mining approach was tested on full-scale data along with different clustering techniques to identify process criticalities. The algorithm was designed to provide an applicable solution for full-scale plants' control logics aimed at online N2O emission mitigation. Results show the ability of the algorithm to isolate specific N2O emission pathways, and highlight possible solutions towards emission control.

Monitoring of degradation of starch-based biopolymer film under different composting conditions, using TGA, FTIR and SEM analysis.

This paper presents the results of a composting lab-scale test carried out on Mater-Bi® film, a starch-based biopolymer. The test material is composed by starch, additives and polybutylene adipate terephthalate (PBAT). The test lasted for 45 days and was developed in three replicates under different temperature and moisture conditions, with the aim to assess the influence on Mater-Bi® degradation of less favourable composting conditions as short thermophilic phase, absence of moistening, and a combination of the two factors. The chemical nature and the morphology of the material and of its single components have been investigated before, during and at the end of the composting process, by means of different analytical techniques. ThermoGravimetric Analysis (TGA) allowed to obtain activation energy and weight loss; Fourier Transform InfraRed spectroscopy (FTIR) and Scanning Electron Microscopy (SEM) were used to study changes in the polymeric and morphological structure, and visual analysis provided information on the size of the Mater-Bi® particles. The results show that the biodegradation of PBAT is strongly influenced by the environmental conditions (temperature and moisture); on the contrary, in all the three replicates, both starch and additives are completely biodegraded within the first days of the process.

Optimization of a large industrial wastewater treatment plant using a modeling approach: A case study.

The objective of this paper is to find the optimum solid retention time (SRT) of a wastewater treatment plant (WWTP), which minimizes operating costs, using a modeling approach with WEST software by MIKE DHI®. For the determination of the kinetic and stoichiometric parameters (used for the correct calibration of the model implemented), respirometric and kinetic batch tests were carried out. Each Oxidation ditch was modeled by a sequence of four aerated activated sludge units (ASUs) and four anoxic ASUs with recirculation. The model is able to simulate the separation efficiency of the secondary settler, which is generally quite low: in fact, the industrial origin of the wastewater induces the formation of small flocs, the dimensions of which can be further reduced by the presence of surface aerators. The nitrification/denitrification process is also accurately predicted. Using data obtained from the model, mass balances at the steady state for COD and N were made and compared to the ones obtained using measured data. After calibration and validation of the model, steady-state simulations were carried out by increasing and decreasing the SRT of the system under two different operational conditions used by the managing company and by evaluating the costs related to the water treatment line and the sludge treatment line for each scenario. It is interesting to note how the total costs are lower in summer than in winter (7.2 €cent/m3 in summer and 8.7 €cent/m3 in winter, in scenario 0). In general, the increase in the SRT led to a decrease in the total management costs. In fact, differences between scenario 0 and the scenario with the lowest total treatment costs (corresponding to an SRT of 11.4 d in winter and 10.0 d in summer) could give rise to total savings of about 44·000€/year in summer and 93·000€/year in winter.

Development of a Dynamic Oriented Rehabilitative Integrated System (DORIS) and Preliminary Tests.

Moving platforms were introduced in the field of the study of posturography since the 1970s. Commercial platforms have some limits: a limited number of degrees of freedom, pre-configured protocols, and, usually, they are expensive. In order to overcome these limits, we developed a robotic platform: Dynamic Oriented Rehabilitative Integrated System (DORIS). We aimed at realizing a versatile solution that can be applied both for research purposes but also for personalizing the training of equilibrium and gait. We reached these goals by means of a Stewart platform that was realized with linear actuators and a supporting plate. Each actuator is provided by an ad hoc built monoaxial load cell. Position control allows a large range of movements and load cells measure the reactive force applied by the subject. Transmission Control Protocol/Internet Protocol (TCP/IP) guarantees the communication between the platform and other systems. We integrated DORIS with a motion analysis system, an electromyography (EMG) system, and a virtual reality environment (VR). This integration and the custom design of the platform offer the opportunity to manipulate the available information of the subject under analysis, which uses visual, vestibular, and plantar feet pressure inputs. The full access to the human movements and to the dynamic interaction is a further benefit for the identification of innovative solutions for research and physical rehabilitation purposes in a field that is widely investigated but still open.

Hydrothermal carbonization of sewage sludge: A critical analysis of process severity, hydrochar properties and environmental implications.

Hydrothermal carbonization (HTC) of sewage sludge reduces the waste volume and can be source of energy and valuable products. Furthermore, HTC offers several advantages over conventional dry-thermal pre-treatments, as no prior drying is requested, and the high quality of the char produced promotes applications as energy production and storage, wastewater remediation, and soil amendment. Relationships between char yields, physicochemical properties and process parameters are here analysed, with the aim to provide insight into the choice of the process severity required to fit the desired application. Moreover, presence and fate of heavy metals and organic contaminants are discussed. The highest reaction temperature is the main parameter affecting the physicochemical characteristics of the char produced, while the heating rate governs the heat mass transfer and the rate of intermediates formation. Depolymerization of the biomass results in a reduction of the oxygen to carbon ratio and, therefore, in augmented high heating values, further increased by deposition of 5-(hydroxymethyl)furfural. Recirculation of process water may enhance dehydration reactions and the deposition of degraded polymers, increasing dewaterability and yield, but field trials are recommended to assess the feasibility of this option. An overuse of chars for energy generation purposes would be deleterious for the environmental life cycle. Further research is encouraged to assess the pollutants abatement and their degradation pathways when incorporated in the carbonaceous product, to promote the application of hydrochars as soil amendment, as well as for environmental remediation purposes.

Methodologies to assess biodegradation of bioplastics during aerobic composting and anaerobic digestion: A review.

Bioplastics are emerging on the market as sustainable materials which rise to the challenge to improve the lifecycle of plastics from the perspective of the circular economy. The article aims at providing a critical insight of research studies carried out in the last 20 years on the degradation of bioplastics under aerobic composting and anaerobic digestion conditions. It mainly focuses on the various and different methodologies which have been proposed and developed to monitor the process of biodegradation of several bioplastic materials: CO2 and CH4 measurements, mass loss and disintegration degree, spectroscopy, visual analysis and scanning electron microscopy. Moreover, across the wide range of studies, the process conditions of the experimental setup, such as temperature, test duration and waste composition, often vary from author to author and in accordance with the international standard followed for the test. The different approaches, in terms of process conditions and monitoring methodologies, are pointed out in the review and highlighted to find significant correlations between the results obtained and the experimental procedures. These observed correlations allow critical considerations to be reached about the efficiency of the methodologies and the influence of the main abiotic factors on the process of biodegradation of bioplastics.

Occurrence of selected pharmaceuticals in wastewater treatment plants of Tuscany: An effect-based approach to evaluate the potential environmental impact.

Municipal wastewaters may pose a risk to the aquatic environment and ultimately to human kind. Their treatment is a fundament step but the actual WWTPs performances cannot be taken for granted, claiming instead for continuous evaluation campaigns. Our waters are indeed threatened by the continuous input of various persistent micropollutants that are part of human daily routine life; the potential effects of their presence in the receiving waters have to be quantified. The present paper reports data of a monitoring campaign focused on nine pharmaceuticals belonging to different therapeutic groups in three WWTPs in Tuscany (Italy). All the three WWTPs use conventional activated sludge process with pre-denitrification and no tertiary treatment. The analytical determination has been achieved through off-line solid phase extraction and analysis in liquid chromatography coupled with mass spectrometry. The overall ecotoxicological effect of effluents was evaluated through a battery of tests using organisms belonging to different trophic levels. All nine pharmaceuticals were detected in the influent of all WWTPs at least in one sampling campaign. The most concentrated compounds were acetaminophen, diclofenac and amoxicillin followed by atenolol, ketoprofen, clarithromycin, carbamazepine, doxycycline and E2; their average concentrations (considering all measurements from all plants) were, respectively: 3914 ±â€¯2620; 2065 ±â€¯739; 2002 ±â€¯2170; 1223 ±â€¯1042; 961 ±â€¯1003; 356 ±â€¯370; 233 ±â€¯100; 196 ±â€¯189; 4 ±â€¯4 ng/L. The highest concentrations were found in the plant that treats urban and hospital wastewaters. Amoxicillin, atenolol and diclofenac were more concentrated in winter than in summer, while ketoprofen, doxycycline and 17-ß-estradiol are higher in summer. These results are probably due to the different consumption of each drug during the year, depending on their therapeutic usage. Measured drugs can be divided into three categories: those ones that are generally well removed inside the WWTP (such as acetaminophen, ketoprofen and atenolol), the partly removed ones (doxycycline, clarithromycin and 17-ß-estradiol) and the refractory ones to biodegradation during activated sludge process (carbamazepine, diclofenac and amoxicillin). Regarding ecotoxicological assays, the most sensitive organisms were V. fisheri and R. subcapitata, whereas D. magna almost never reacted to the wastewaters. Seasonal variability was not clearly observed among plants and collecting time. The toxicity score evaluated all the results coming from the bioassays battery, indicating that WWTPs treatments always determined a toxicity reduction, even though a residual toxicity was still measured. This observation, together with chemical data, clearly indicate WWTPs as an important source of pharmaceuticals in the Arno river with an important environmental toxicity; therefore, the reduction of pharmaceutical load originated from point source such us WWTPs would ask in the future the adoption of refinery steps in WWTPs able to increase RE of drugs.

Tanks in series versus compartmental model configuration: considering hydrodynamics helps in parameter estimation for an N2O model.

The choice of the spatial submodel of a water resource recovery facility (WRRF) model should be one of the primary concerns in WRRF modelling. However, currently used mechanistic models are limited by an over-simplified representation of local conditions. This is illustrated by the general difficulties in calibrating the latest N2O models and the large variability in parameter values reported in the literature. The use of compartmental model (CM) developed on the basis of accurate hydrodynamic studies using computational fluid dynamics (CFD) can take into account local conditions and recirculation patterns in the activated sludge tanks that are important with respect to the modelling objective. The conventional tanks in series (TIS) configuration does not allow this. The aim of the present work is to compare the capabilities of two model layouts (CM and TIS) in defining a realistic domain of parameter values representing the same full-scale plant. A model performance evaluation method is proposed to identify the good operational domain of each parameter in the two layouts. Already when evaluating for steady state, the CM was found to provide better defined parameter ranges than TIS. Dynamic simulations further confirmed the CM's capability to work in a more realistic parameter domain, avoiding unnecessary calibration to compensate for flaws in the spatial submodel.

Development of a dynamic oriented rehabilitative integrated system.

Moving platform are introduced in the field of the study of posturography since '70 years. Commercial platforms have some limits: a limited number of degrees of freedom; preconfigured protocols and usually they are expensive. In order to overcome these limits, we developed a robotized platform: DORIS. We aimed at realizing a versatile solution that can be applied both for research purpose but also for personalizing the training of equilibrium and gait. We reached these goals by means of a Stewart platform that was realized with linear actuators and a supporting plate. Each actuator is provided by a monoaxial ad hoc built load cell. Position and force control allow a multipurpose range of movement and a reactive interaction with the force applied by the subject. TCP/IP protocol guarantees the communication between the platform and other systems. Therefore, we integrated DORIS with motion analysis system, EMG system and virtual reality. The adopted solution offers the opportunity to manipulate available information by means of different coupling of visual, vestibular and plantar feet pressure inputs. The full control of its movement and of human dynamic interaction is a further benefit for the identification of innovative solutions for research and physical rehabilitation in a field that is strongly investigated, but still open.

Long-Term Performance of a Full-Scale Membrane Plant for Landfill Leachate Pretreatment: A Case Study.

This paper presents a case study describing a full-scale membrane bioreactor (MBR) for the pretreatment of landfill leachates. The treatment train includes an aerated equalization tank, a denitrification tank, an oxidation/nitrification tank, and two ultrafiltration units. The plant has worked continuously since 2008 treating landfill leachates at a flux of 2⁻11 L·h-1·m-2. The old train of membranes worked in these conditions for more than seven years prior to being damaged and replaced. The permeability (K) of the membrane varied between 30 and 80 L·h-1·m-2·bar-1 during the years of operation. In 2010, after two years of operation, the oxidation/nitrification tank was changed to work in alternate cycles of aerated and anoxic conditions, in order to improve the denitrification process. The MBR, working at a mean sludge retention time of 144 days and with mixed liquor suspended solids of 17 g/L, achieved high removal rates of conventional contaminants, with more than 98% for Biochemical Oxygen Demand, 96% for ammonium, and 75% for Chemical Oxygen Demand (COD). From the COD balance, half the COD entering was determined to be biologically oxidized into carbon dioxide, while another 24% remains in the sludge. In order to obtain these results, the company used 5.2 KWh·m-3, while spending 0.79 €·m-3.

Multi-point monitoring of nitrous oxide emissions in three full-scale conventional activated sludge tanks in Europe.

The large global warming potential of nitrous oxide (N2O) is currently of general concern for the water industry, especially in view of a new regulatory framework concerning the carbon footprint of water resource recovery facilities (WRRFs). N2O can be generated through different biological pathways and from different treatment steps of a WRRF. The use of generic emission factors (EF) for quantifying the emissions of WRRFs is discouraged. This is due to the number of different factors that can affect how much, when and where N2O is emitted from WRRFs. The spatial and temporal variability of three WRRFs in Europe using comparable technologies is presented. An economically feasible and user-friendly method for accounting for the contribution of anoxic zones via direct gas emission measurements was proven. The investigation provided new insights into the contribution from the anoxic zones versus the aerobic zones of biological WRRF tanks and proved the unsuitability of the use of a single EF for the three WRRFs. Dedicated campaigns for N2O emissions assessment are to be advised. However, similarities in the EF magnitude can be found considering treatment strategy and influent water composition.

Preliminary evaluation of Pleurotus ostreatus for the removal of selected pharmaceuticals from hospital wastewater.

The fungus Pleurotus ostreatus was investigated to assess its ability to remove diclofenac, ketoprofen, and atenolol spiked at 10 mg/L each one in hospital wastewater. The degradation test was carried out in a fluidized bed bioreactor testing both the batch and the continuous mode (hydraulic retention time in the range 1.63-3 days). In batch mode, diclofenac disappeared in less than 24 h, ketoprofen was degraded up to almost 50% in 5 days while atenolol was not removed. In continuous mode, diclofenac and ketoprofen removals were about 100% and 70% respectively; atenolol degradation was negligible during the first 20 days but it increased up to 60% after a peak of laccase production and notable biomass growth. In order to identify the enzymatic system involved, further experiments were carried out in flasks. Purified laccase completely transformed atenolol and diclofenac in less than 5 h, but not ketoprofen. In vivo experiments suggested that cytochrome P450 could be involved in diclofenac and ketoprofen degradation, while partial correlation studies confirmed the role of laccase in atenolol and diclofenac degradation. Two intermediates of diclofenac and ketoprofen were detected by nuclear magnetic resonance. Moreover P. ostreatus was able to reduce chemical oxygen demand of the hospital wastewater which is an important advantage comparing to other fungi in order to develop a wastewater treatment process. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1529-1537, 2017.