Classification of Botrytized Wines Based on Producing Technology Using Flow-Modulated Comprehensive Two-Dimensional Gas Chromatography.

The enantiomeric ratio of chiral compounds is known as a useful tool to estimate wine quality as well as observe an influence of wine-producing technology. The incorporation of flow-modulated comprehensive two-dimensional gas chromatography in this type of analysis provides a possibility to improve the quality of results due to the enhancement of separation capacity and resolution. In this study, flow-modulated comprehensive two-dimensional gas chromatography was incorporated in enantioselective analysis to determine the influence of winemaking technology on specific features of botrytized wines. The samples included Tokaj essences (high-sugar wines), Tokaj botrytized wines and varietal wines (Furmint, Muscat Lunel, Lipovina) and wines maturated on grape peels. The obtained data was processed with hierarchic cluster analysis to reveal variations in composition and assess classification ability for botrytized wines. A significant difference between the samples was observed for the enantiomeric distribution of ethyl lactate and presence of monoterpene alcohols. The varietal wines were successfully separated from the other types, which showed more similar results and could be divided with additional parameters. We observed a correlation between the botrytized wines and the varietal wines fermented with grape skins. As to the essences produced from juice of botrytized grapes, the results were quite similar to those of the botrytized wines, even though monoterpenes were not detected in the extracts.

Enantioselective comprehensive two-dimensional gas chromatography of lavender essential oil.

The enantiomeric composition of several chiral markers in lavender essential oil was studied by flow modulated comprehensive two-dimensional gas chromatography operated in the reverse flow mode and hyphenated to flame ionization and quadrupole mass spectrometric detection. Two capillary column series were used in this study, 2,3-di-O-ethyl-6-O-tert-butyldimethylsilyl-ß-cyclodextrin or 2,3,6-tri-O-methyl-ß-cyclodextrin, as the chiral column in the first dimension and α polyethylene glycol column in the second dimension. Combining the chromatographic data obtained on these column series, the enantiomeric and excess ratios for α-pinene, ß-pinene, camphor, lavandulol, borneol, and terpinen-4-ol were determined. This maybe a possible route to assess the authenticity of lavender essential oil.

Comparison of the performance of forward fill/flush and reverse fill/flush flow modulation in comprehensive two-dimensional gas chromatography.

The performances of forward flow fill and flush (FFF) and of reverse flow fill and flush (RFF) in flow modulated comprehensive two-dimensional gas chromatography (GC×GC) using the same volume of the sampling channel have been studied and compared. Sample models include a reference mixture of hydrocarbons at low concentration, a petroleum reformate product and the essential oil of Rosa damascena Miller. The latter samples contain solutes in different concentrations but some up to 30% allowing to study overloading phenomena in detail. For solutes injected at low quantity, the performance of FFF and RFF is similar. For solutes present in a sample at high quantity, RFF guarantees less broadening and spreading resulting in better quantitation.

Enantioselective comprehensive two-dimensional gas chromatography. A route to elucidate the authenticity and origin of Rosa damascena Miller essential oils.

The analysis of Bulgarian and Turkish Rosa damascena Miller essential oils was performed by flow-modulated comprehensive two-dimensional gas chromatography using simultaneous detection of the second column effluent by flame ionization and quadrupole mass spectrometric detection. Enantioselective separations were obtained by running the samples on 2,3-di-O-ethyl-6-O-tert-butyldimethylsilyl-ß-cyclodextrin column as the first column and on polyethylene glycol as the second column. The determination of enantiomeric or diastereomeric excess of some terpenoic solutes is a possible route for quality or authenticity control as well as for the elucidation of the country of origin.

Considerations on the determination of the limit of detection and the limit of quantification in one-dimensional and comprehensive two-dimensional gas chromatography.

Methods based on the blank signal as proposed by IUPAC procedure and on the signal to noise ratio (S/N) as listed in the ISO-11843-1 norm for determination of the limit of detection (LOD) and quantitation (LOQ) in one-dimensional capillary gas chromatography (1D-GC) and comprehensive two-dimensional capillary gas chromatography (CG×GC) are described in detail and compared for both techniques. Flame ionization detection was applied and variables were the data acquisition frequency and, for CG×GC, also the modulation time. It has been stated that LOD and LOQ estimated according to IUPAC might be successfully used for 1D-GC-FID method. Moreover, LOD and LOQ decrease with decrease of data acquisition frequency (DAF). For GC×GC-FID, estimation of LOD by IUPAC gave poor reproducibility of results while for LOQ reproducibility was acceptable (within ±10% rel.). The LOD and LOQ determined by the S/N concept both for 1D-GC-FID and GC×GC-FID methods are ca. three times higher than those values estimated by the standard deviation of the blank. Since the distribution pattern of modulated peaks for any analyte separated by GC×GC is random and cannot be predicted, LOQ and LOD may vary within 30% for 3s modulation time. Concerning sensitivity, 1D-GC-FID at 2Hz and of GC×GC-FID at 50Hz shows a ca. 5 times enhancement of sensitivity in the modulated signal output.

Computerized optimization of flows and temperature gradient in flow modulated comprehensive two-dimensional gas chromatography.

Informational entropy and syentropy percent were used to optimize the flows in the first (1D) and in the second (2D) dimension ((1)Fm and (2)Fm, respectively) as well as the temperature program rate (r) for the flow modulated GC×GC-FID separation of C6-C12 aromatic hydrocarbons in a low boiling petrochemical sample. The separations were performed on a column series consisting of a 25m×0.25mm i.d.×0.2µm df of the polar ionic liquid SLB-IL 100 (1,9-di(3-vinylimidazolium)nonane bis(trifluoromethylsulfonyl)imide) in the first dimension and 5m×0.25mm i.d.×0.25µm df apolar HP-5MS (5% phenyl-95% methylpolysiloxane) in the second dimension. A dependence of a distribution of individual aromatic hydrocarbons in the 2D retention plane on the carrier gas flows ((1)Fm, and (2)Fm,) and temperature gradient (r) was examined in this study. It was found that informational entropy and synentropy percent are advantageous criteria to characterize the distribution of peaks in the 2D retention plane. Maximum informational entropy and synentropy percents correspond to the maximum distribution of C6-C12 aromatic hydrocarbons in the corresponding 2D retention plane gained by the given separation using optimized values of individual carrier gas column volume flows and the temperature rate at the temperature programmed GC×GC separations.

On the use of quadrupole mass spectrometric detection for flow modulated comprehensive two-dimensional gas chromatography.

Flow modulated comprehensive two-dimensional gas chromatography with simultaneous flame ionization detection (FM GC×GC-FID) and quadrupole mass spectrometric detection (FM GC×GC-qMSD) was applied to the analysis of a quantitative reference standard sample covering the C5-C14 hydrocarbon range and a kerosene sample. This study reports the influence of the data acquisition frequency (DAF) of the qMSD on the qualitative and quantitative data. The DAF was varied between 5.27 and 25.45Hz. In GC×GC-qMSD, the characterization of peaks is getting worse with decreasing qMSD frequencies which deteriorate the quality of the 2D contour plots of the separations. It is, however, demonstrated that the improved characterization of the peaks at high qMSD frequencies is combined with loss in sensitivity and in spectral quality. Dependences of a (2)D hydrocarbon peak area (∑Ai of all corresponding (2)D peaks) on the DAFs show negative slopes which testify the conclusion that the sensitivity of GC×GC-qMSD determinations decreases with the increase of DAF. Consequently, the limits of detection (LOD) and quantification (LOQ) increase with the increase of DAF. Moreover, quality criteria on recorded spectral data also indicate that the lower the DAF is, the higher is the spectral quality.

On the use of ionic liquid capillary columns for analysis of aromatic hydrocarbons in low-boiling petrochemical products by one-dimensional and comprehensive two-dimensional gas chromatography.

One-dimensional and comprehensive two-dimensional flow modulated gas chromatography with simultaneous flame ionization and mass spectrometric detection were applied for the identification and quantification of benzene, toluene, ethyl benzene and xylenes (BTEX) as well as of all C9-C11 aromatic hydrocarbons in the low-boiling petroleum products gasoline, reformate and fluid catalytic cracking (FCC) samples. GC×GC experiments were performed on two reversed phase polarity column sets namely SLB-IL100 (25m×250µm i.d.×0.2µm df)+HP-5MS (5m×250µm i.d.×0.25µm df) and SLB-IL111 (30m×250µm i.d.×0.2µm df)+HP-5MS (5m×250µm i.d.×0.25µm df). The one-dimensional GC experiments were carried out on the same ionic liquid columns. The most powerful method is GC×GC on the SLB-111+HP-5MS column combination. Quantitative analysis of individual aromatic hydrocarbons (C6-C11) present in gasoline, reformate and fluid catalytic cracking (FCC) samples was performed by GC×GC-FID using the internal normalization method. Mass spectra obtained by GC×GC-qMSD were used for identification of the aromatic hydrocarbons in these samples.

On the determination of a detector response enhancement factor for flow modulated comprehensive two-dimensional gas chromatography.

Comparison of conventional one-dimensional gas chromatography (1D-GC) and comprehensive two-dimensional gas chromatography (GC×GC) shows that the detector signal in GC×GC is significantly enhanced. The value of this enhancement depends on the operating parameters, such as the modulation time and the non-modulated ((1)D column) and corresponding modulated ((2)D column) peak widths. Determination of the enhance factors in flow modulated GC×GC for separation of hydrocarbon samples using flame ionization detection (FM GC×GC-FID) was studied. A term named detector response enhance factor (DREF) has been designed to express the value of the signal enhancement. Two methods were used to calculate DREF: (i) employing (2)D peak height, and (ii) using a theoretical approach. Comparison of FM GC×GC-FID and 1D-GC-FID method illustrates that the DREF increases from 10 to 33 times, in 1-6s modulation time intervals.

Flow-modulated comprehensive two-dimensional gas chromatography with simultaneous flame ionization and quadrupole mass spectrometric detection.

Flow-modulated comprehensive two-dimensional gas chromatography with simultaneous monitoring of the separation by flame ionization (GC × GC-FID) and quadrupole mass spectrometric (GC × GC-qMSD) detection was studied for the analysis of gasoline and kerosene samples. The acquisition frequency of the FID was 100 Hz and of the qMSD 18 Hz for the mass range m/z 40-300. The instrumental set-up is such that both one-dimensional (GC-FID and GC-qMSD) and two-dimensional separations using the same working conditions can be performed. Gasoline and kerosene samples were analyzed on the column combination HP-5MS ((1)D)+HP INNOWax ((2)D). Three modulated peaks were obtained for each hydrocarbon present above 0.1% with ca. 300 ms peak width at the base using 6 s modulation times. Modulated peaks in GC × GC-FID were thus characterized by ca. 30 points while those in GC × GC-qMSD method by 6-8 points only. The FID speed is sufficient for reliable quantitative analysis, while the qMSD scan speed is perfectly appropriate for identification purposes. Moreover, in the GC × GC-qMSD method considerably improved quality of uncorrected spectra was obtained, arising from the enhanced separation over one-dimensional GC-MSD analysis. Spectral match qualities of up to 98% were found.

On retentivity tuning by flow in the second column of different comprehensive two dimensional gas chromatographic configurations.

Retentivity tuning in comprehensive two dimensional GC separations of aliphatics (linear and cyclic hydrocarbons) and aromatics in gasoline by changing the carrier gas flows in the column series at constant working temperature parameters of both columns is discussed. Comprehensive 2D techniques studied include GC×GC with cryogenic and differential flow modulation and non-modulated transfer (NMT). In all configurations, the first dimension was a non-polar column and the second dimension a polar column. Using three different flows (0.6, 1.0 and 1.4mL/min) of helium carrier gas in cryogenic modulated GC×GC illustrated that, as expected, retention of the solutes on the (1)D and (2)D columns increased but the separation quality was nearly constant. A change of carrier gas pressure (p(m)=175-125kPa) on the (1)D and (2)D columns joint point at constant inlet pressure (p(i)=525kPa) in NMT, induces an increase of the carrier gas flow rate on the (1)D and a decrease on the (2)D column, respectively. The higher retentivity of the (2)D column improved the group type separation of aliphatic/cyclic hydrocarbons and aromatics and a higher distribution of aromatics on the 2D retention plane was noted. Retentivity tuning was also performed in flow modulated GC×GC by operating the (1)D column at 0.8mL/min and the (2)D column at 20 and 26mL/min. The higher retentivity at 20mL/min improved the group type separation of aliphatic/cyclic hydrocarbons and aromatics in the 2D retention plane.