Enhanced Carrier Transport in Strongly Coupled, Epitaxially Fused CdSe Nanocrystal Solids.

Strongly coupled, epitaxially fused colloidal nanocrystal (NC) solids are promising solution-processable semiconductors to realize optoelectronic devices with high carrier mobilities. Here, we demonstrate sequential, solid-state cation exchange reactions to transform epitaxially connected PbSe NC thin films into Cu2Se nanostructured thin-film intermediates and then successfully to achieve zinc-blende, CdSe NC solids with wide epitaxial necking along {100} facets. Transient photoconductivity measurements probe carrier transport at nanometer length scales and show a photoconductance of 0.28(1) cm2 V-1 s-1, the highest among CdSe NC solids reported. Atomic-layer deposition of a thin Al2O3 layer infiltrates and protects the structure from fusing into a polycrystalline thin film during annealing and further improves the photoconductance to 1.71(5) cm2 V-1 s-1 and the diffusion length to 760 nm. We fabricate field-effect transistors to study carrier transport at micron length scales and realize high electron mobilities of 35(3) cm2 V-1 s-1 with on-off ratios of 106 after doping.

Rare-Earth Sulfide Nanocrystals from Wet Colloidal Synthesis: Tunable Compositions, Size-Dependent Light Absorption, and Sensitized Rare-Earth Luminescence.

We report the synthesis of colloidal EuS, La2S3, and LaS2 nanocrystals between 150 and 255 °C using rare-earth iodides in oleylamine. The sulfur source dictates phase selection between La2S3 and LaS2, which are stabilized for the first time as colloidal nanocrystals. The indirect bandgap absorption of LaS2 shifts from 635 nm for nanoellipsoids to 365 nm for square-based nanoplates. Er3+ photoluminescence in La2S3:Er3+ (10%) is sensitized by the semiconducting host in the 390-450 nm range. The synthetic route yields tunable compositions of rare-earth sulfide nanocrystals. Interaction of light with these novel semiconducting nanostructures hosting rare-earth emitters should be attractive for applications that require broadband sensitization of RE emitters.

Unusual Dinitrogen Binding and Electron Storage in Dinuclear Iron Complexes.

A rare example of a dinuclear iron core with a non-linearly bridged dinitrogen ligand is reported in this work. One-electron reduction of [(tBupyrr2py)Fe(OEt2)] (1) (tBupyrr2py2- = 2,6-bis((3,5-di-tert-butyl)pyrrol-2-yl)pyridine) with KC8 yields the complex [K]2[(tBupyrr2py)Fe]2(µ2-η1:η1-N2) (2), where the unusual cis-divacant octahedral coordination geometry about each iron and the η5-cation-π coordination of two potassium ions with four pyrrolyl units of the ligand cause distortion of the bridging end-on µ-N2 about the FeN2Fe core. Attempts to generate a Et2O-free version of 1 resulted instead in a dinuclear helical dimer, [(tBupyrr2py)Fe]2 (3), via bridging of the pyridine moieties of the ligand. Reduction of 3 by two electrons under N2 does not break up the dimer, nor does it result in formation of 2 but instead formation of the ate-complex [K(OEt2)]2[(tBupyrr2py)Fe]2 (4). Reduction of 1 by two electrons and in the presence of crown-ether forms the tetraanionic N2 complex [K2][K(18-crown-6)]2(tBupyrr2py)Fe]2(µ2-η1:η1-N2) (5), also having a distorted FeN2Fe moiety akin to 2. Complex 2 is thermally unstable and loses N2, disproportionating to Fe nanoparticles among other products. A combination of single-crystal X-ray diffraction studies, solution and solid-state magnetic studies, and 57Fe Mössbauer spectroscopy has been applied to characterize complexes 2-5, whereas DFT studies have been used to help explain the bonding and electronic structure in these unique diiron-N2 complexes 2 and 5.

Efficient photoluminescence of isotropic rare-earth oxychloride nanocrystals from a solvothermal route.

Eu3+-doped sub-10 nm LaOCl nanocrystals with 43% photoluminescence quantum yield were prepared by solvothermal synthesis from hydrated rare-earth chlorides. As-obtained nanocrystals are nearly spherical, monodisperse and stable as colloidal dispersions. These combined features should intensify the interest for nanocrystalline rare-earth oxyhalides and their optical properties.

A high pressure pathway toward boron-based nanostructured solids.

Inorganic nanocomposites made of an inorganic matrix containing nanoparticle inclusions provide materials of advanced mechanical, magnetic, electrical properties and multifunctionality. The range of compounds that can be implemented in nanocomposites is still narrow and new preparation methods are required to design such advanced materials. Herein, we describe how the combination of nanocrystal synthesis in molten salts with subsequent heat treatment at a pressure in the GPa range gives access to a new family of boron-based nanocomposites. With the case studies of HfB2/ß-HfB2O5 and CaB6/CaB2O4(iv), we demonstrate by X-ray diffraction and through (scanning) transmission electron microscopy the crystallization of borate matrices into rare compounds and unique nanostructured solids, while metal boride nanocrystals remain dispersed in the matrix and maintain small sizes below 30 nm, thus demonstrating a new multidisciplinary approach toward nanoscaled heterostructures.

Beyond the Compositional Threshold of Nanoparticle-Based Materials.

The design of inorganic nanoparticles relies strongly on the knowledge from solid-state chemistry not only for characterization techniques, but also and primarily for choosing the systems that will yield the desired properties. The range of inorganic solids reported and studied as nanoparticles is however strikingly narrow when compared to the solid-state chemistry portfolio of bulk materials. Efforts to enlarge the collection of inorganic particles are becoming increasingly important for three reasons. First, they can yield materials more performing than current ones for a range of fields including biomedicine, optics, catalysis, and energy. Second, looking outside the box of common compositions is a way to target original properties or to discover genuinely new behaviors. The third reason lies in the path followed to reach these novel nano-objects: exploration and setup of new synthetic approaches. Indeed, willingness to access original nanoparticles faces a synthetic challenge: how to reach nanoparticles of solids that originally belong to the realm of solid-state chemistry and its typical protocols at high temperature? To answer this question, alternative reaction pathways must be sought, which may in turn provide tracks for new, untargeted materials. The corresponding strategies require limiting particle growth by confinement at high temperatures or by decreasing the synthesis temperature. Both approaches, especially the latter, provide a nice playground to discover metastable solids never reported before. The aim of this Account is to raise attention to the topic of the design of new inorganic nanoparticles. To do so, we take the perspective of our own work in the field, by first describing synthetic challenges and how they are addressed by current protocols. We then use our achievements to highlight the possibilities offered by new nanomaterials and to introduce synthetic approaches that are not in the focus of recent literature but hold, in our opinion, great promise. We will span methods of low temperature "chimie douce" aqueous synthesis coupled to microwave heating, sol-gel chemistry and processing coupled to solid state reactions, and then molten salt synthesis. These protocols pave the way to metastable low valence oxyhydroxides, vanadates, perovskite oxides, boron carbon nitrides, and metal borides, all obtained at the nanoscale with structural and morphological features differing from "usual" nanomaterials. These nano-objects show original properties, from sensing, thermoelectricity, charge and spin transports, photoluminescence, and catalysis, which require advanced characterization of surface states. We then identify future trends of synthetic methodologies that will merit further attention in this burgeoning field, by emphasizing the importance of unveiling reaction mechanisms and coupling experiments with modeling.

In Situ Solid-Gas Reactivity of Nanoscaled Metal Borides from Molten Salt Synthesis.

Metal borides have mostly been studied as bulk materials. The nanoscale provides new opportunities to investigate the properties of these materials, e.g., nanoscale hardening and surface reactivity. Metal borides are often considered stable solids because of their covalent character, but little is known on their behavior under a reactive atmosphere, especially reductive gases. We use molten salt synthesis at 750 °C to provide cobalt monoboride (CoB) nanocrystals embedded in an amorphous layer of cobalt(II) and partially oxidized boron as a model platform to study morphological, chemical, and structural evolutions of the boride and the superficial layer exposed to argon, dihydrogen (H2), and a mixture of H2 and carbon dioxide (CO2) through a multiscale in situ approach: environmental transmission electron microscopy, synchrotron-based near-ambient-pressure X-ray photoelectron spectroscopy, and near-edge X-ray absorption spectroscopy. Although the material is stable under argon, H2 triggers at 400 °C decomposition of CoB, leading to cobalt(0) nanoparticles. We then show that H2 activates CoB for the catalysis of CO2 methanation. A similar decomposition process is also observed on NiB nanocrystals under oxidizing conditions at 300 °C. Our work highlights the instability under reactive atmospheres of nanocrystalline cobalt and nickel borides obtained from molten salt synthesis. Therefore, we question the general stability of metal borides with distinct compositions under such conditions. These results shed light on the actual species in metal boride catalysis and provide the framework for future applications of metal borides in their stability domains.

New route toward nanosized crystalline metal borides with tuneable stoichiometry and variable morphologies.

Herein we highlight for the first time the ability to tune the stoichiometry of metal boride nanocrystals through nanoparticle synthesis in thermally stable inorganic molten salts. Two metal-boron systems are chosen as case studies: boron-poor nickel borides and boron-rich yttrium borides. We show that NiB, Ni4B3, Ni2B, Ni3B, and YB6 particles can be obtained as crystalline phases with good selectivity. Anisotropic crystallization is observed in two cases: the first boron-rich YB4 nanorods are reported, while boron-poor NiB nanoparticles show a peculiar crystal habit, as they are obtained as spheres with uniaxial defects related to the crystal structure. Crystallization mechanisms are proposed to account for the appearance of these two kinds of anisotropy at the nanoscale.