Palladium hexacyanoferrate hydrogel as a novel and simple enzyme immobilization matrix for amperometric biosensors.

An amperometric glucose biosensor with glucose oxidase (GOx) immobilized into palladium hexacyanoferrate (PdHCF) hydrogel has been prepared and evaluated. The sensor was based on a two-layer configuration with biocatalytic and electrocatalytic layers separately deposited onto the electrode. To reduce the overpotential for reduction of hydrogen peroxide liberated in the enzyme catalyzed oxidation of glucose, an inner thin layer of nickel hexacyanoferrate (NiHCF) electrodeposited onto the surface of graphite electrode was used as an electrocatalyst. As an outer layer, the hydrogel of palladium hexacyanoferrate with entrapped glucose oxidase was used. Under optimal operating conditions (pH 5.0 and E = -0.075 V versus calomel (3.0 M KCl) reference electrode), sensor showed high sensitivity to glucose (0.3-1.0 microA/mM) and a response time of less than 30s. The linear response to glucose was obtained in the concentration range between 0.05 and 1.0 mM in batch analysis mode and 0-7.0 mM in FIA. During the 32 days testing period, no significant decrease in the sensor sensitivity was observed. The sensor was applied for the determination of glucose concentration in fruit juice and yoghurt drink, and the results obtained showed good correlation with results obtained by reference spectrophotometric enzyme method.

Improved signals ratio resolution method by optimization of resolution function--simultaneous determination of Cu(II) and Cd(II) in water samples.

From an ecological and economical point of view, it is important to design analytical procedures for monitoring heavy metals in the environment and industrial processes in a way to minimize the use of hazardous reagents and reduce the analysis time. In this paper, a well-known dithizonate extraction-based method for the determination of many metal ions was improved by using chemometrical selectivity of the strongly overlapped spectra of copper and cadmium dithizonates in CCl4 for their simultaneous determination from a single extraction at pH 10. The individual absorption spectra, having absorption maxima difference of only 20 nm, were separated, and the metal ions were quantified by using an improved procedure for optimizing the resolving function in a recently proposed signals ratio method. The procedure consists of using many different resolving functions and plotting the difference of the mean of absolute and nonabsolute mean values of pseudosignals [PDMMV (PS)] against analyte concentrations obtained with each of the resolving functions, thus obtaining 2 straight lines having intersections that give a unique and reliable value of the unknown concentration of the individual analyte in mixture giving strongly overlapped spectra. In this way, the main drawback of the signals ratio resolution method, that is, the visual estimation of optimal resolving function, is eliminated. The proposed parameter, PDMMV (PS), was tested by using both simulated and experimental spectra. Copper was determined in the mixture with ca 20-fold excess of cadmium, and cadmium was determined in ca 10-fold excess of copper at submicromolar concentration levels.