Increasing grades of frontal deformities in knee osteoarthritis are not associated with ligamentous ankle instabilities.

PURPOSE: Varus or valgus deformities in knee osteoarthritis may have a crucial impact on ankle subtalar range of motion (ROM) and ligamentous stability. The purpose of this study was to assess whether the grade of ankle eversion and inversion rotation stability was influenced by frontal deformities of the knee joint. METHODS: Patients who were planned to undergo total knee arthroplasty (TKA) were prospectively included in this study. Patients were examined radiologically (mechanical tibiofemoral angle (mTFA), hindfoot alignment view angle (HAVA), anterior distal tibia angle (ADTA)) and clinically (ROM of the knee and ankle joint, foot function index, knee osteoarthritis outcome score). Ankle stability was assessed using an ankle arthrometer (AA) to test inversion/eversion (ie) rotation and anterior/posterior (ap) displacement stability of the ankle joint. Correlations were calculated using Pearson's coefficient, and differences between two independent groups of nonparametric data were calculated using a two-sided Wilcoxon signed rank test. RESULTS: Eighty-two (varus n = 52, valgus n = 30) patients were included. The preoperative mTFA significantly correlated with the HAVA (Pearson's correlation = - 0.72, p < 0.001). Laxity testing of the ankle demonstrated that in both varus and valgus knee osteoarthritis, higher grades of mTFA did not correlate with the inversion or eversion capacity of the ankle joint. The ADTA significantly correlated with the posterior displacement of the ankle joint (cor = 0.24, p = 0.049). CONCLUSIONS: This study could not confirm that higher degrees of frontal knee deformities in osteoarthritis were associated with increasing grades of ligamentous ankle instabilities or a reduced ROM of the subtalar joint. LEVEL OF EVIDENCE: II.

Accuracy of tibial positioning in the frontal plane: a prospective study comparing conventional and innovative techniques in total knee arthroplasty.

BACKGROUND: Coronal alignment of the tibial component determines functional outcome and survival in total knee arthroplasty (TKA). Innovative techniques for tibial instrumentation have been developed to improve accuracy and reduce the rate of outliers. METHODS: In a prospective study, 300 patients were allocated to four different groups using a randomization process (two innovative and two conventional) techniques of tibial instrumentation (conventional: extramedullary, intramedullary; innovative: navigation and patient-specific instrumentation (PSI); n = 75 for each group). The aims were to reconstruct the medial proximal tibial angle (MPTA) to 90° and the mechanical tibio-femoral axis (mTFA) to 0°. Both angles were evaluated and compared between all groups three months after the surgery. Patients who presented with a postoperative mTFA > 3° were classified as outliers. RESULTS: The navigation and intramedullary technique both demonstrated that they were significantly more precise in reconstructing a neutral mTFA and MPTA compared to the other two techniques. The odd's ratio (OR) for producing outliers was highest for the PSI method (PSI OR = 5.5, p < 0.05; extramedullary positioning OR = 3.7, p > 0.05; intramedullary positioning OR = 1.7, p > 0.05; navigation OR = 0.04, p < 0.05). We could only observe significant differences between pre- and postoperative MPTA in the navigation and intramedullary group. The MPTA showed a significant negative correlation with the mTFA in all groups preoperatively and in the extramedullary, intramedullary and PSI postoperatively. CONCLUSION: The navigation and intramedullary instrumentation provided the precise positioning of the tibial component. Outliers were most common within the PSI and extramedullary technique. Optimal alignment is dependent on the technique of tibial instrumentation and tibial component positioning determines the accuracy in TKA since mTFA correlated with MPTA pre- and postoperatively.

Impaired fracture healing with high non-union rates remains irreversible after traumatic brain injury in leptin-deficient mice.

Patients with traumatic brain injury (TBI) and long-bone fractures can show increased callus formation. This effect has already been reproduced in wild-type (wt) mice. However, the mechanisms remain poorly understood. Leptin is significantly increased following TBI, while its role in bone healing remains unclear. The aim of this study was to evaluate fracture healing in leptin-deficient ob/ob mice and to measure any possible impact of TBI on callus formation. 138 female, 12 weeks old, ob/ob mice were divided into four groups: Control, fracture, TBI and combined trauma. Osteotomies were stabilized with an external fixator; TBI was induced with Controlled Cortical Impact Injury. Callus bridging was weekly evaluated with in vivo micro-CT. Biomechanical testing was performed ex vivo. Micro-CT showed high non-union rates after three and four weeks in the fracture and combined trauma group. No differences were observed in callus volume, density and biomechanical properties at any time point. This study shows that bony bridging is impaired in the present leptin-deficient trauma model. Furthermore, the phenomenon of increased callus formation after TBI could not be reproduced in ob/ob mice, as in wt mice. Our findings suggest that the increased callus formation after TBI may be dependent on leptin signaling.

Evaluation of tooth preparations - a comparative study between faculty members and pre-clinical students.

INTRODUCTION: Preparation of teeth is a basic technique for dental treatment and plays an essential role in pre-clinical education. The purpose of this study was to evaluate whether undergraduate students' evaluations of prepared teeth were consistent with faculty assessments and correlated with students' performance in test preparations. MATERIALS AND METHODS: Thirty four of 52 dental students having attended a pre-clinical course on basic prosthodontic topics including tooth preparation volunteered to participate in this study. The students were given 10 casts each containing one tooth with an intentionally applied preparation fault of a certain type prepared by an experienced clinician. The students were asked to mark on a list the fault type found in every tooth. The association of students' ratings with their performance during the course was analysed by means of a contingency table, and a generalised linear model was used to compare students' and faculty ratings (α = 0.05). RESULTS: No significant difference between students' and faculty ratings could be found by analysis of deviance (P = 0.953). Significant deviations of fault detection probabilities from their group mean were found for six of ten fault types. No significant association between students' performance in test preparations and students ratings could be found (P = 0.564). DISCUSSION: It was possible to achieve a level of calibration within the group of students, which was comparable to that in the group of faculty members. CONCLUSIONS: Calibration of both students and examiners remains to be an issue with the teaching concepts applied in this study.

Student attitudes towards computer-aided testing.

INTRODUCTION: Computer-aided learning (CAL) is a viable alternative to traditional teaching methods. While CAL is used for teaching only, computer-aided testing (CAT) can be applied as a computer-based examination method. The aim of the present study was to evaluate students' attitude towards CAT as compared to written multiple choice tests. MATERIALS AND METHODS: Forty-one undergraduate dental students underwent a mock examination consisting of 15 written multiple choice questions and 15 questions delivered using the interactive MobiTed® system. A questionnaire based on an eight-item seven-point Likert scale was used to evaluate the students' attitude towards CAT. The students' performance in both tests was analysed using paired t-tests. Correlations between test performance and questionnaire were expressed by Pearson correlation coefficients. RESULTS: Despite study-design-related differences, students' test performance between written multiple choice and MobiTed® was comparable. No correlations between test results and questionnaire could be set up. Students rated MobiTed® to be equivalent to written multiple choice and had no difficulties with the CAT set up. The pre-defined sequence of questions with each question being shown only once was considered to be a major disadvantage of the CAT system. Complex questions should be displayed longer compared to short questions. DISCUSSION: Computer-aided testing appeared to be equivalent to written multiple choice tests not only in terms of student performance but also to their perception. This is consistent with previous studies. CONCLUSIONS: Interactive multiple choice tests may provide an alternative to written tests, but should allow examinees to have control over the sequence, as well as the length of time the questions are displayed.

Improvement and long-term stability of neuromuscular adaptation in implant-supported overdentures.

OBJECTIVES: In edentulous patients, implant-supported overdentures can improve chewing efficiency and patient satisfaction, and even a positive impact on bone tissue preservation has been observed. The objective of this long-term study was to investigate whether kinesiographic and electromyographic (EMG) parameters would also benefit from implant placement and whether the status achieved would remain consistent over time. MATERIAL AND METHODS: The functional adaptability of the neuromuscular system in edentulous patients has been recorded in four different states of restoration: (1) insufficient old dentures, (2) new complete dentures, (3) implant-supported overdentures, and (4) implant-supported overdentures 10 years in use. In each state of restoration, the neuromuscular adaptation was assessed during masticatory activity on the basis of myodynamic parameters such as vertical opening, frontal extension and closing velocity. EMG parameters, i.e. Musculus masseter and Musculus temporalis activities were recorded simultaneously. RESULTS: The results revealed a general increase in the myodynamic and EMG-parameters. All of them clearly approached the values for normal dentate subjects and maintained this level over a period of 10 years. The significant changes between states 2 and 3 indicate that implant stabilization of dentures is accompanied by an immediate increase of the neuromuscular parameters. CONCLUSIONS: In elderly edentulous patients, the treatment with two interforaminal implants provides evidence of neuromuscular adaptation towards values of healthy dentate. Thus, the known benefits of implant placement such as tissue perseverance and improved function are complemented by improved neuromuscular adaptation.

Comparison between computer-aided testing and traditional multiple choice: an equivalence study.

AIMS: Computer-aided learning (CAL) is a viable alternative to traditional teaching methods. While CAL is used for teaching only, computer-aided testing (CAT) can be applied as a computer-based examination method. The aim of the present study was to compare the performance of undergraduate students in computer-interactive tests and traditional multiple choice tests and to evaluate the influence of question length and language skills on test results. MATERIALS AND METHODS: Fifty-two native German-speaking students and five non-native speaking students were randomly assigned to two groups. They were required to answer 20 conventional multiple choice questions and 20 questions using the interactive MobiTed system. An analysis of variance and t-tests (alpha = 0.05) were used to compare scores. RESULTS: Non-native speakers scored significantly lower on the interactive test compared with the native speaking students (P = 0.048 for long questions and P = 0.003 for short questions). There were no significant group differences on the conventional multiple choice test (P = 0.052 for long questions and P = 0.089 for short questions). Based on the results of the native speaking students neither test method nor question length had an influence on overall performance. CONCLUSION: Interactive multiple choice tests may provide an alternative to written tests, especially when considering time expenditure. Language skills and question length should be taken into account when setting time limits for examination.

Stress and inflammation as a detrimental combination for peri-implant bone loss.

The causes of peri-implant bone loss continue to be controversial. To determine the impact of biomechanical stress and inflammation, we investigated a total of 80 interforaminal implants in situ for more than 10 years. Two stress groups, with 14 patients each, were established: a low-stress situation with single-standing implants, and an increased-stress situation with splinted implants. To categorize inflammation, we introduced a Composite Inflammation Score using 4 inflammatory parameters. Peri-implant bone loss was calculated from digital panoramic radiographs. To differentiate between the effects of stress and inflammation, we compared bone loss in both stress groups at equivalent levels of inflammation. With greater Composite Inflammation Score values, a clear discrepancy between single-standing and splinted implants was evident (p = 0.117/0.000, regression analysis; p = 0.135/0.000, analysis of variance; p = 0.002, t tests). While stress and inflammation alone may not necessarily be detrimental factors, the presence of stress heightens peri-implant bone loss significantly as inflammation increases.

Methodological scheme for designing the monitoring of genetically modified crops at the regional scale.

According to EC regulations the deliberate release of genetically modified (GM) crops into the agro-environment needs to be accompanied by environmental monitoring to detect potential adverse effects, e.g. unacceptable levels of gene flow from GM to non-GM crops, or adverse effects on single species or species groups thus reducing biodiversity. There is, however, considerable scientific and public debate on how GM crops should be monitored with sufficient accuracy, discussing questions of potential adverse effects, agro-environmental variables or indicators to be monitored and respective detection methods; Another basic component, the appropriate number and location of monitoring sites, is hardly considered. Currently, no consistent GM crop monitoring approach combines these components systematically. This study focuses on and integrates spatial agro-environmental aspects at a landscape level in order to design monitoring networks. Based on examples of environmental variables associated with the cropping of Bt-Maize (Zea maize L.), herbicide-tolerant (HT) winter oilseed rape (Brassica napus L.), HT sugar beet (Beta vulgaris L.), and starch-modified potato (Solanum tuberosum L.), we develop a transferable framework and assessment scheme that comprises anticipated adverse environmental effects, variables to be measured and monitoring methods. These we integrate with a rule-based GIS (geographic information system) analysis, applying widely available spatial area and point information from existing environmental networks. This is used to develop scenarios with optimised regional GM crop monitoring networks.

Determining ecoregions for environmental and GMO monitoring networks.

A representative environmental monitoring network at the regional scale cannot use raster-based or random sampling designs, but requires a stratified sampling procedure integrating different information layers, and it has to occur in ecologically differing homogeneous regions (ecoregions). These we have determined using a set of spatial strata with ecological variables which we analysed with classification and regression trees (CART). We present a framework for environmental monitoring, that covers different scales, and we transfer the framework to a potential GMO (genetically modified organisms) monitoring network. We use ecoregion and other environmental strata together with existing environmental monitoring networks to determine GMO monitoring sites more precisely.