The effect of denture adhesive on mandibular movement during chewing.

BACKGROUND: The authors conducted a study to determine if reducing mandibular denture movement through the use of a denture adhesive improves chewing function in edentulous patients. METHODS: The authors compared the mean chewing rates of 10 denture wearers who used and did not use a denture adhesive with that of a control group of 10 dentate people. The authors recorded mandibular movements using a multichannel magnetometer tracking system while the subjects chewed standardized pieces of dried apricots and fresh white bread. They made recordings for the test subjects without the use of denture adhesive and at zero, two and four hours after Fixodent denture adhesive cream (Procter & Gamble Co.) was applied to the mandibular denture. RESULTS: The mean chewing rate for the control group was significantly faster than that of the test group at baseline (P < .01). The authors found statistically significant increases in the mean chewing rates for the test group after the denture adhesive was applied at all time points for both foods. None of the after--adhesive-application rates were significantly different from the control group's rate (P > .05). CONCLUSIONS: Use of denture adhesive increased the mean chewing rate in test subjects immediately after and at two and four hours after denture adhesive was applied to a rate that approximated that observed in control subjects (P > .05). CLINICAL IMPLICATIONS: These findings show that using a denture adhesive promotes a faster and more natural rate of chewing.

Professional attitudes toward denture adhesives: A Delphi technique survey of academic prosthodontists.

STATEMENT OF PROBLEM: The use of denture adhesives and their role in prosthodontics has been an intriguing and conflicted topic, both in clinical practice and dental education. PURPOSE: This study generated discussion, and if possible, obtained a consensus on a series of issues related to denture adhesives among a group of leading academic prosthodontists. MATERIAL AND METHODS: The Delphi Technique survey method was used. It consists of a series of survey questionnaire rounds to a panel of experts to either develop a consensus (>70% agreement) or to clarify the reasons for multiple schools of thought on a topic. A 24-item Delphi questionnaire was sent to an expert panel that consisted of a 33% regionally stratified random sample of program directors of undergraduate complete denture courses in US dental schools. The 5 major topic areas on denture adhesives addressed by the questionnaire items were (1) general perceptions, (2) specific clinical uses/misuses, (3) patient education, (4) inclusion in dental curricula, and (5) overall opinions of utility. RESULTS: Of the 18 randomly selected panelists, 94% (n = 17) agreed to participate, with either 16 or 17 fully participating in each of the 3 survey rounds. The panel achieved consensus and clearly concluded that denture adhesives: (1) are a useful adjunct in denture prosthesis services, having specific roles in both the fabrication and postinsertion phases; (2) had the potential for misuse, both by dentists and by patients; and (3) should be an integral part of patient education for all denture patients and of the undergraduate dental curriculum. However, the panel was unable to achieve consensus on whether denture adhesives should be used at the postinsertion phase for immediate denture patients and whether, on the whole, they were a beneficial adjunct in denture patient management (59% agreed they were). The panelists also clearly expressed their concerns that neither dentists nor patients should use denture adhesives as a substitute for either good clinical practices or proper denture maintenance routines. CONCLUSIONS: This panel of leading academic prosthodontists concluded that denture adhesives are a useful adjunct in denture prosthesis services, with specific roles in both fabrication and postinsertion phases. They also indicated that only through education, for dentists and patients, would the dual goals of maximizing the beneficial aspects of denture adhesive use while minimizing the misuse of denture adhesives be achieved.

Bend testing of wrought wire removable partial denture alloys.

The flexibility of the wrought wire clasp is related to a number of factors, including the type and gauge of the alloy. The purpose of this study was to compare the bend behavior of five wrought wire alloys used in removable partial dentures. The alloys and their gauge diameters (in millimeters) were Ticonium (18, 19, 20), platinum-gold-palladium (18, 19), Wironium (18, 20), Jelenko Standard (18, 19, 20), and Denture Clasp (18, 19, 20). A total of 12 to 15 samples of each dental alloy were tested. Three-point bending was performed on a servohydraulic testing system controlled by a computer at 1.00 mm/sec until fracture or actuator contact occurred. Maximum stress and elastic modulus in bending were determined for each gauge diameter. Analysis of variance and post hoc Scheffe statistical analyses revealed significant maximum stress and elastic modulus in bending differences for different alloys of the same gauge and for different gauges of the same alloy. The choice of material and the gauge diameter significantly influenced the mechanical property of bending for wrought wire removable partial denture alloys. The Ticonium alloy had the greatest elastic modulus (stiffest) at all levels and the Denture Clasp and the Jelenko Standard alloys had the lowest elastic modulus (most flexible). These data indicate that knowledge of the bending properties of an alloy is equally as important as the gauge size when selecting a wire clasp.

Denture adhesives: changing attitudes.

Since people began using denture adhesives more than 200 years ago, dentists have been slow to acknowledge their place in prosthetic dentistry. The author maintains that if properly used, denture adhesives can be an asset to the dentist's armamentarium. This article reviews much of the recent research on adhesives and outlines the conditions under which they should be used.

Retention and stability of the maxillary denture during function.

The objectives of this study were to provide a quantitative account of the extent to which the maxillary complete denture moves during function (chewing, swallowing, and speech production) and to determine whether differences in movement occur as a function of denture fit. A total of 24 patients were studied, 12 with poorly fitting dentures and 12 with well-fitting dentures. Denture movements were measured with a Myotronics kinesiograph that tracked the movements of a small magnet attached to the inferior surface of the denture. Results indicated that denture movement was greatest for the two chewing activities; varied extensively from individual to individual; and that there were no statistically significant overall movement effects as a function of fit. It was concluded that all maxillary dentures are subject to movements in all directions, but that the degree of movement is related more to the individual denture wearer than it is to the fit of the denture.

Effect of denture adhesive on the retention and stability of maxillary dentures.

This study used quantitative methods to measure the effects of a denture adhesive on the retention and stability of the maxillary denture. Denture movements were measured on 20 patients during standardized chewing, swallowing, and speaking activities, first with no adhesive, and then at 0, 2, 4, 6, and 8 hours after application of an over-the-counter cream adhesive. The major findings were that the denture adhesive produced a statistically significant improvement in the retention and stability of the maxillary denture during the various chewing, swallowing, and speaking activities, for up to 8 hours; there were no statistically significant differences in improvement between a poorly fitting and well-fitting denture; and patients were able to produce significantly greater levels of incisal bite force with the use of the adhesive.

Light-cured resin for post patterns.

A method of using light-cured acrylic resin as an alternative to the use of chemically-cured acrylic resins with elastomeric impressions for direct post patterns is presented. The GC Unifast LC acrylic resin is a powder/liquid type resin cured by exposure to visible light. The polymerization process has four stages before final curing: slurry, stringy, dough-like (plastic), and rubber-like (elastic). Advantages over current direct and indirect procedures include ease of manipulation of the material and no change in laboratory handling procedures. While in the dough-like state, the material can be contoured. In the rubber-like state, it is flexible to disengage from minor undercut areas.

Removable partial overdentures. Clinical considerations.

Removable partial overdentures have the potential for salvaging teeth with poor prognoses and using them for prosthesis support and retention. Careful case selection and creative treatment planning can lead to aesthetic, well-supported restorations for a variety of patients with compromised dentitions.

Endodontic considerations in restoration of partial overdenture abutments.

Overdenture abutment teeth often require endodontic treatment. Various factors, such as status of the pulp, periodontal state of the tooth, and the sequence of overdenture treatment, influence endodontic management of the patient. After completion of endodontic treatment, the coronal part of the root filling is removed, leaving an adequate amount of the root filling in the apical part of the root canal undisturbed. The abutment tooth is then permanently restored with a filling material, or is prepared for a cast restoration.

Clinical and microbiological effects of daily brushing with either NaF or SnF2 gels in subjects with fixed or removable dental prostheses.

61 adults, with fixed or removable dental protheses, completed a 6-month double-blind trial comparing the clinical and microbial effects of brushing twice daily with either 0.22% NaF or 0.4% SnF2. Those subjects brushing with SnF2 had less gingivitis and fewer bleeding sites for both "total teeth" and "abutment teeth". Plaque scores between groups were only statistically different for the "abutment teeth". The microbial parameters, salivary S. mutans and subgingival plaque total CFU, were significantly reduced in the SnF2 group. In both treatment groups, there was a reduction over the course of the study in the number of subjects with recoverable A. actinomycetemcomitans and black pigmented bacteroides, yet there was no difference between groups.

Augmentation of the atrophic maxilla with interpositional autogenous bone grafts.

Extreme ridge atrophy is a significant problem when it occurs in the maxilla, since inadequate denture function, as well as poor facial aesthetics, commonly result. Use of the Le Fort I osteotomy of the maxilla with interpositional iliac cortico-cancellous bone grafts is a predictable method of ridge augmentation in severe cases. In our experience, secondary vestibuloplasty has not been necessary prior to construction of new prostheses. Patient satisfaction has been excellent.

The quality of restorative dental care.

This study investigated the quality of restorative care in a group of health center employees. With limitations in sample size, representativeness of the sample, and methods of measuring quality clearly recognized, the results of the study suggest that significant improvements in the quality of amalgams, synthetic restorations, crowns, fixed partial denture abutments, and pontics will probably require advances in the science and technology of dentistry and modifications in the present system for delivering dental care. The impact of a quality review system is unlikely to affect the care provided by the majority of dentists. Quality review should play a role in monitoring the services fo the small percentage of dentists whose care is very inadequate. Admittedly, these conclusions are speculative and are not based on a large body of experimental information. Nevertheless, the evidence that is available is suggestive, and the development of a national policy to monitor the quality of dental care must consider what can be reasonably achieved with a quality assurance system.