Inhibitory Effect of 5-Aminoimidazole-4-Carbohydrazonamides Derivatives Against Candida spp. Biofilm on Nanohydroxyapatite Substrate.

Candida can adhere and form biofilm on biomaterials commonly used in medical devices which is a key attribute that enhances its ability to cause infections in humans. Furthermore, biomaterial-related infections represent a major therapeutic challenge since Candida biofilms are implicated in antifungal therapies failure. The goals of the present work were to investigate the effect of three 5-aminoimidazole-4-carbohydrazonamides, namely (Z)-5-amino-1-methyl-N'-aryl-1H-imidazole-4-carbohydrazonamides [aryl = phenyl (1a), 4-fluorophenyl (1b), 3-fluorophenyl (1c)], on Candida albicans and Candida krusei biofilm on nanohydroxyapatite substrate, a well-known bioactive ceramic material. To address these goals, both quantitative methods (by cultivable cell numbers) and qualitative evaluation (by scanning electron microscopy) were used. Compounds cytocompatibility towards osteoblast-like cells was also evaluated after 24 h of exposure, through resazurin assay. The three tested compounds displayed a strong inhibitory effect on biofilm development of both Candida species as potent in vitro activity against C. albicans sessile cells. Regarding cytocompatibility, a concentration-dependent effect was observed. Together, these findings indicated that the potent activity of imidazole derivatives on Candida spp. biofilms on nanohydroxyapatite substrate, in particular compound 1c, is worth further investigating.

Antibacterial effect and biocompatibility of a novel nanostructured ZnO-coated gutta-percha cone for improved endodontic treatment.

This work explored a novel approach to enhance the antibacterial activity of commercial Gutta-percha (GP) cones, the most commonly used core filling materials used in endodontic treatment. The reported procedure involved an argon (Ar) plasma treatment (PT) of the GP cone surface, followed by the deposition of a ZnO thin film by magnetron sputtering. The resulting surfaces were evaluated for surface topography, antibacterial activity against Enterococcus faecalis and Staphylococcus aureus, and cytocompatibility with human osteoblastic cells. GP cones treated with NaOCl, a routine chair-side protocol, were also tested as reference. The deposition of a ZnO film on pristine GP cones increased its antibacterial activity. Cones pre-treated with Ar-plasma (PT) and coated with the ZnO thin film presented significantly higher antibacterial activity than that observed on the pristine and, also, compared to the ZnO coated cones. The higher antibacterial activity of PT + ZnO cones appears related to the major effects induced by the PT pre-treatment on the cone surface endowing the deposited ZnO film with a homogeneous nanostructured topography that greatly improved surface reactivity. The modified GP cones maintained an appropriate cytocompatibility with human cells. This novel approach provides ready-to-use cones with enhanced antibacterial activity, improving a strict asepsis protocol during endodontic treatment and preventing secondary endodontic infections.

Micropatterned Silica Films with Nanohydroxyapatite for Y-TZP Implants.

This investigation aimed at developing micropatterned silica thin films (MSTFs) containing nanohydroxyapatite (nano-HA) microaggregates that were not completely covered by silica so that they could directly interact with the surrounding cells. The objectives were 1) to evaluate the effect of the presence of 2 films (MSTF with or without nano-HA addition) on the characteristic strength (σ0) and Weibull modulus ( m) of a yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) and 2) to evaluate the effect of these 2 films, as applied onto the Y-TZP surface, on the morphology, orientation, and proliferation of MG63 cells. Sol-gel process and soft lithography were used to apply the MSTF onto the Y-TZP specimens. Three experimental groups were produced: Y-TZP, Y-TZP + MSTF, and Y-TZP + MSTF + sprayed nano-HA. All surfaces were characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy and tested for 4-point flexural strength ( n = 30) in water at 37 °C. Weibull analysis was used to determine m and σ0 (maximum likelihood method). In vitro biological behavior was performed with human osteoblast-like cells (MG63). Y-TZP was successfully coated with MSFT and MSFT + nano-HA. Scanning electron microscopy micrographs indicated that the microaggregates of nano-HA were not entirely covered by the silica. There was no statistically significant difference among the experimental groups for σ0 and m. In the groups containing the films, the cells were elongated and aligned along the lines. The MSFT + nano-HA group showed significantly higher cell metabolic activity than that obtained for the Y-TZP group at day 7. This investigation was successful in producing an MSTF containing nano-HA microaggregates that remained exposed to the environment. The developed films did not jeopardize the structural reliability of a commercial Y-TZP, as confirmed by the Weibull statistics. The MG63 cells seeded over the films became elongated and aligned along the films' micropatterned lines. Y-TZP specimens coated with MSTF and nano-HA showed a higher cell metabolic activity and proliferation after 7 d of culture when compared with uncoated Y-TZP.

Potential anti-cancer and anti-Candida activity of Zn-derived foams.

Zinc (Zn)-derived foams have been prepared from an alkaline electrolyte solution by galvanostatic electrodeposition under different conditions. A detailed physico-chemical characterization was performed by Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). A pioneer application of these foams in medical implant-related applications was investigated. The in vitro behaviour of these Zn-derived foams in simulated physiological conditions was studied. The results revealed that the presence of zinc oxide was important enough to change the in vitro behaviour of these materials. The potential of these Zn-derived foams in inhibiting bone cancer cell proliferation - osteoscarcoma cells - and important pathogenic fungi responsible for implant-related infections -Candida albicans- was examined. Furthermore, the foams were evaluated for cytocompatibility with normal human osteoblasts. The results obtained allowed us to conclude that Zn-derived foams have an interesting potential for anti-cancer and anti-Candida activity, targeted for bone-related implant applications, suggesting that this novel material may have potential for further clinical studies.

Antibacterial activity and biocompatibility of three-dimensional nanostructured porous granules of hydroxyapatite and zinc oxide nanoparticles--an in vitro and in vivo study.

Ceramic scaffolds are widely studied in the bone tissue engineering field due to their potential in regenerative medicine. However, adhesion of microorganisms on biomaterials with subsequent formation of antibiotic-resistant biofilms is a critical factor in implant-related infections. Therefore, new strategies are needed to address this problem. In the present study, three-dimensional and interconnected porous granules of nanostructured hydroxyapatite (nanoHA) incorporated with different amounts of zinc oxide (ZnO) nanoparticles were produced using a simple polymer sponge replication method. As in vitro experiments, granules were exposed to Staphylococcus aureus and Staphylococcus epidermidis and, after 24 h, the planktonic and sessile populations were assessed. Cytocompatibility towards osteoblast-like cells (MG63 cell line) was also evaluated for a period of 1 and 3 days, through resazurin assay and imaging flow cytometry analysis. As in vivo experiments, nanoHA porous granules with and without ZnO nanoparticles were implanted into the subcutaneous tissue in rats and their inflammatory response after 3, 7 and 30 days was examined, as well as their antibacterial activity after 1 and 3 days of S. aureus inoculation. The developed composites proved to be especially effective at reducing bacterial activity in vitro and in vivo for a weight percentage of 2% ZnO, with a low cell growth inhibition in vitro and no differences in the connective tissue growth and inflammatory response in vivo. Altogether, these results suggest that nanoHA-ZnO porous granules have a great potential to be used in orthopaedic and dental applications as a template for bone regeneration and, simultaneously, to restrain biomaterial-associated infections.

Anti-sessile bacterial and cytocompatibility properties of CHX-loaded nanohydroxyapatite.

Nanohydroxyapatite possesses exceptional biocompatibility and bioactivity regarding bone cells and tissues, justifying its use as a coating material or as a bone substitute. Unfortunately, this feature may also encourage bacterial adhesion and biofilm formation. Surface functionalization with antimicrobials is a promising strategy to reduce the likelihood of bacterial infestation and colonization on medical devices. Chlorhexidine digluconate is a common and effective antimicrobial agent used for a wide range of medical applications. The purpose of this work was the development of a nanoHA biomaterial loaded with CHX to prevent surface bacterial accumulation and, simultaneously, with good cytocompatibility, for application in the medical field. CHX (5-1500 mg/L) was loaded onto nanoHA discs and the materials were evaluated for CHX adsorption and release profile, physic-chemical features, antibacterial activity against Escherichia coli, Staphylococcus aureus and Staphylococcus epidermidis, and cytocompatibility toward L929 fibroblasts. Results showed that the adsorption of CHX on nanoHA surface occurred by electrostatic interactions between the cationic group of CHX and the phosphate group of nanoHA. The release of CHX from CHX-loaded nanoHA showed a fast initial rate followed by a slower kinetics release, due to constraints caused by dilution and diffusion-limiting processes. NanoHA.50 to nanoHA.1500 showed strong anti-sessile activity, inhibiting bacterial adhesion and the biofilm formation. CHX-nanoHA caused a dose- and time-dependent inhibitory effect on the proliferation of fibroblasts for nanoHA.100 to nanoHA.1500. Cellular behavior on nanoHA.5 and nanoHA.50 was similar to control. Therefore, CHX-loaded nanoHA surfaces appear as a promising alternative to prevention of devices-related infections.

In vitro antimicrobial activity and biocompatibility of propolis containing nanohydroxyapatite.

The high number of biomaterial associated infections demands new strategies to prevent this problem. In this study the suitability of nanohydroxyapatite (nanoHA)-based surfaces containing two Brazilian extracts of propolis (green and red ones) to prevent bacterial growth and biofilm formation, as well as its non-cytotoxic nature, was investigated. Optical density, colony forming units and MTT reduction assay were used to assess the materials' antibacterial activity against planktonic and sessile growth of Staphylococcus aureus. NanoHA matrix was able to absorb both types of propolis and the obtained results revealed the antibacterial effectiveness of the novel materials expressed as the reduction of bacterial growth and biofilm formation ability. Additionally, cell culture tests showed the growth of fibroblasts with high metabolic activity and without membrane damage. Therefore, these nanoHA-based surfaces containing natural products deriving from bees may be a promising bioactive biomaterial to be further studied with the aim of application to orthopaedic or dental devices.

Influence of nanohydroxyapatite surface properties on Staphylococcus epidermidis biofilm formation.

Nanohydroxyapatite (nanoHA), due to its chemical properties, has appeared as an exceptionally promising bioceramic to be used as bone regeneration material. Staphylococcus epidermidis have emerged as major nosocomial pathogens associated with infections of implanted medical devices. In this work, the purpose was to study the influence of the nanoHA surface characteristics on S. epidermidis RP62A biofilm formation. Therefore, two different initial inoculum concentrations (Ci) were used in order to check if these would affect the biofilm formed on the nanoHA surfaces. Biofilm formation was followed by the enumeration of cultivable cells and by scanning electron microscopy. Surface topography, contact angle, total surface area and porosimetry of the biomaterials were studied and correlated with the biofilm data. The surface of nanoHA sintered at 830 (nanoHA830) showed to be more resistant to S. epidermidis attachment and accumulation than that of nanoHA sintered at 1000 (nanoHA1000). The biofilm formed on nanoHA830 presented differences in terms of structure, surface coverage and EPS production when compared to the one formed on nanoHA1000 surface. It was observed that topography and surface area of nanoHA surfaces had influence on the bacterial attachment and accumulation. Ci influenced bacteria attachment and accumulation on nanoHA surfaces over time. The choice of the initial inoculum concentration was relevant proving to have an effect on the extent of adherence thus being a critical point for human health if these materials are used in implantable devices. This study showed that the initial inoculum concentration and surface material properties determine the rate of microbial attachment to substrata and consequently are related to biofilm-associated infections in biomaterials.

Micropatterned silica thin films with nanohydroxyapatite micro-aggregates for guided tissue regeneration.

UNLABELLED: Surface modification of biomaterials has been shown to improve the biological response to dental implants. The ability to create a controlled micro-texture on the implant via additive surface modification techniques with bioactive nanohydroxyapatite (nanoHA) may positively influence guided tissue regeneration. OBJECTIVE: The main goal of this study was to produce micro-fabricated SiO(2) surfaces modified with nanohydroxyapatite particles and to characterize their influence on the biological response of Human Dental-Pulp Mesenchymal Stem Cells (hDP-MSCs) and Streptococcus mutans. MATERIALS AND METHODS: A combined methodology of sol-gel and soft-lithography was used to produce micropatterned SiO(2) thin films with different percentages of nanoHA micro-aggregates. The surfaces were characterized by SEM/EDS, FT-IR/ATR, AFM, XPS quantitative elemental percentage and contact angle measurements. Biological characterization was performed using hDP-MSCs cultures, while Streptococcus mutans was the selected microorganism to evaluate the bacterial adhesion on the thin films. RESULTS: Micropatterned SiO(2) surfaces with 0%, 1% and 5% of nanoHA micro-aggregates were successfully produced using a combination of sol-gel and soft-lithography. These surfaces controlled the biological response, triggering alignment and oriented proliferation of hDP-MSCs and significant differences in the adhesion of S. mutans to the different surfaces. SIGNIFICANCE: The micropatterned surfaces exhibited biocompatible behavior that induced an oriented adhesion and proliferation of hDP-MSCs while SiO(2) presented low bacterial adhesion. These results show that the combination of sol-gel with soft-lithography is a good approach to create micropatterned surfaces with bioactive nanoparticles for guided tissue regeneration.

Adhesion of Staphylococcus aureus, Staphylococcus epidermidis, and Pseudomonas aeruginosa onto nanohydroxyapatite as a bone regeneration material.

In orthopedics due to the enormous number of surgical procedures involving invasive implant biomaterials, infections have a huge impact in terms of morbidity, mortality, and medical costs. In this study the initial adhesion of several strains namely Staphylococcus aureus, Staphylococcus epidermidis, and Pseudomonas aeruginosa, to nanohydroxyapatite, previously heat-treated at 725 °C and 1000 °C was assessed. Adherent cells were evaluated by scanning electron microscopy and quantified by confocal laser scanning microscopy and as colony forming units after being released by sonication. The wettability and roughness of samples surfaces were assessed by contact angle measurements and atomic force microscopy, respectively. Nanohydroxyapatite heat-treated at 1000 °C appeared to be more resistant to bacterial adhesion, over time, in five of the six tested strains while the clinical strains isolated from orthopedic infections presented superior ability to adhere, as well as better capacity to produce slime. The increase in materials sintering temperature resulted in increased hydrophobicity and roughness; however, other surface features such as the decrease in surface area and on porosity as well as the decrease on zeta potential may be the aspects that contributed to a lower bacterial adhesion on the materials sintered at 1000 °C.