A simple decontamination approach using hydrogen peroxide vapour for Bacillus anthracis spore inactivation.

AIMS: To evaluate the use of relatively low levels of hydrogen peroxide vapour (HPV) for the inactivation of Bacillus anthracis spores within an indoor environment. METHODS AND RESULTS: Laboratory-scale decontamination tests were conducted using bacterial spores of both B. anthracis Ames and Bacillus atrophaeus inoculated onto several types of materials. Pilot-scale tests were also conducted using a larger chamber furnished as an indoor office. Commercial off-the-shelf (COTS) humidifiers filled with aqueous solutions of 3 or 8% hydrogen peroxide (H2 O2 ) were used to generate the HPV inside the mock office. The spores were exposed to HPV for periods ranging from 8 h up to 1 week. CONCLUSIONS: Four- to seven-day exposures to low levels of HPV (average air concentrations of approx. 5-10 parts per million) were effective in inactivating B. anthracis spores on multiple materials. The HPV can be generated with COTS humidifiers and household H2 O2 solutions. With the exception of one test/material, B. atrophaeus spores were equally or more resistant to HPV inactivation compared to those from B. anthracis Ames. SIGNIFICANCE AND IMPACT OF THE STUDY: This simple and effective decontamination method is another option that could be widely applied in the event of a B. anthracis spore release.

Laboratory evaluation of large-scale decontamination approaches.

AIMS: To evaluate the effectiveness of two spray-based decontamination methods for surface contamination reduction and to determine the potential for contamination spread by these methods. METHODS AND RESULTS: Material coupons (treated plywood and concrete) were contaminated with c. 1 × 10(7) spores of Bacillus atrophaeus by aerosol deposition. Decontaminants (pH-adjusted bleach or Spor-Klenz(®) RTU) were applied to coupons by either backpack sprayer or gas-powered sprayer. Contact time, reapplication frequency and rinse method were also varied. In addition to surface removal efficacy, partitioning of contamination between the rinsate and aerosol fractions was determined. Results indicated that pH-adjusted bleach was effective (≥6 logs reduction) when two applications and a 30 min contact time were administered, regardless of the decontaminant application method or material. Spor-Klenz(®) RTU was effective on wood, but achieved ≤3 logs reduction on concrete. A shortened application procedure with pH-adjusted bleach resulted in lower efficacy on wood, and a greater apparent potential for contamination spread. CONCLUSIONS: Consideration of material surface type is important when selecting a decontaminant. Also, achieving conditions that effectively inactivate surface biological contamination are critical to preventing the spread of contamination. SIGNIFICANCE AND IMPACT OF THE STUDY: Results presented here are intended to help development of remediation plans following a biological contamination incident.

Optimizing acidified bleach solutions to improve sporicidal efficacy on building materials.

AIMS: We evaluated whether lowering pH (with acetic acid) and raising free available chlorine (FAC) levels in bleach solutions would improve efficacy in inactivating Bacillus spores on different materials. We also determined how varying pH and FAC levels affected bleach stability. METHODS AND RESULTS: Acidified bleach solutions with pH levels of 4.5, 6 and 7.5 and FAC levels between 5000 and 10,000 ppm were evaluated for decontamination efficacy against Bacillus subtilis spores inoculated onto test coupons made from wood, ceramic and galvanized steel. Lowering the pH or increasing the FAC level improved efficacy in some of the tests, but depended on the material, which significantly affected decontamination efficacy. The acidified bleach at pH of 7.5 was significantly less effective than bleach at a pH of 4.5 or 6. The FAC levels in the bleach were the most stable at pH 4.5, and stability at pH 4.5 was not significantly affected by the initial FAC level. CONCLUSIONS: It may be advisable to use bleach solutions with lower pH (rather than high FAC levels) in light of both the decontamination efficacy and bleach stability results. For wood materials, use of sporicides other than acidified bleach may be warranted. SIGNIFICANCE AND IMPACT OF THE STUDY: These results may be useful in preparing acidified bleach solutions for decontamination of materials contaminated with spores such as Bacillus anthracis.