Mesoporosity as a new parameter for understanding tension stress generation in trees.

The mechanism for tree orientation in angiosperms is based on the production of high tensile stress on the upper side of the inclined axis. In many species, the stress level is strongly related to the presence of a peculiar layer, called the G-layer, in the fibre cell wall. The structure of the G-layer has recently been described as a hydrogel thanks to N(2) adsorption-desorption isotherms of supercritically dried samples showing a high mesoporosity (pores size from 2-50 nm). This led us to revisit the concept of the G-layer that had been, until now, only described from anatomical observation. Adsorption isotherms of both normal wood and tension wood have been measured on six tropical species. Measurements show that mesoporosity is high in tension wood with a typical thick G-layer while it is much less with a thinner G-layer, sometimes no more than normal wood. The mesoporosity of tension wood species without a G-layer is as low as in normal wood. Not depending on the amount of pores, the pore size distribution is always centred around 6-12 nm. These results suggest that, among species producing fibres with a G-layer, large structural differences of the G-layer exist between species.

Variation in xylem formation of Viburnum odoratissimum var. awabuki: growth strain and related anatomical features of branches exhibiting unusual eccentric growth.

Growth strains (GSs) and growth eccentricity in the branches of Viburnum odoratissimum var. awabuki (K. Koch) Zabel were measured. A pronounced growth promotion occurred on the lower side of some branches. Although the GS of the branches was similar to that of normal wood, a larger GS was observed on the upper side of the branches. Thus, eccentric growth occurred on the side opposite to the larger GS. In addition, there was a strong negative relationship between f-back bending and eccentric growth, indicating that eccentric growth largely precluded correction to the vertical position. To understand the function of eccentric growth on the lower side of the branches, we examined several anatomical features of the branches and found that (1) the cell walls of both sides lacked the gelatinous layer, (2) the microfibril angle measured by X-ray diffraction and polarizing light was small on both the upper and the lower sides and (3) the vessel number and the cell wall area did not change to a large extent. The anatomical features of the xylem did not differ obviously between the upper and the lower sides of the branches; however, the fibers were longer on the lower side than on the upper side. These results suggest that the growth stress pattern and formation of branch architecture in V. odoratissimum differ from those observed in other woody angiosperms.

Characterization of a gel in the cell wall to elucidate the paradoxical shrinkage of tension wood.

Wood behavior is characterized by high sensibility to humidity and strongly anisotropic properties. The drying shrinkage along the fibers, usually small due to the reinforcing action of cellulosic microfibrils, is surprisingly high in the so-called tension wood, produced by trees to respond to strong reorientation requirements. In this study, nitrogen adsorption-desorption isotherms of supercritically dried tension wood and normal wood show that the tension wood cell wall has a gel-like structure characterized by a pore surface more than 30 times higher than that in normal wood. Syneresis of the tension wood gel explains its paradoxical drying shrinkage. This result could help to reduce technological problems during drying. Potential applications in biomechanics and biomimetics are worth investigating, considering that, in living trees, tension wood produces tensile growth stresses 10 times higher than that of normal wood.

Mechanical analysis of the strains generated by water tension in plant stems. Part I: stress transmission from the water to the cell walls.

Plant tissues shrink and swell in response to changes in water pressure. These strains can be easily measured, e.g., at the surface of tree stems, to obtain indirect information about plant water status and other physiological parameters. We developed a mechanical model to clarify how water pressure is transmitted to cell walls and causes shrinkage of plant tissues, particularly in the case of thick-walled cells such as wood fibers. Our analysis shows that the stress inside the fiber cell walls is lower than the water tension. The difference is accounted for by a stress transmission factor that depends on two main effects. The first effect is the dilution of the stress through the cell wall, because water acts at the lumen border and is transmitted to the outer border of the cell, which has a larger circumference. The second effect is the partial conversion of radial stress into tangential stress. Both effects are quantified as functions of parameters of the cell wall structure and its mechanical properties.

Using wood creep data to discuss the contribution of cell-wall reinforcing material.

Longitudinal four-point creep bending tests were performed on small clear-wood spruce specimens having various microfibrillar angles. Cell-wall compliance was deduced from macroscopic data by accounting for porosity. Time-dependent compliance was converted into complex compliance and rigidity using the value and the slope of the compliance versus logarithm of time. Complex rigidity plots of all specimens, for the time range 10(3)-10(6) s, could be superimposed by a horizontal shift depending on the microfibrillar angle. The shape of complex trajectories allowed a decomposition of the cell-wall relaxation modulus as the sum of an elastic contribution function of the microfibrillar angle and a time-dependent term unrelated to it, and suggested a discussion on the contribution of the various cell-wall layers to the observed relaxation process.