Increasing the Thermal Stability and High-Temperature Strength of Vanadium Alloys by Strengthening with Nanosized Non-Metallic Particles.

Using the methods of scanning and transmission electron microscopy, the features of the structural-phase state of a vanadium alloy of the V-Cr-Ta-Zr system after a combined treatment, which consisted in cyclic alternation of thermomechanical and chemical-heat treatments, were studied. The values of yield strength and ductility of the V-Cr-Ta-Zr alloy were determined, depending on the stabilization and test temperatures. It was established that, after the combined treatment, the structural-phase state of the V-Cr-Ta-Zr alloy was composite, in which the joint implementation of dispersion and substructural strengthening ensured the formation of a gradient grain structure with a polygonal state, the elements of which were fixed by nanosized ZrO2 particles characterized by a high thermal stability. Such modification of the microstructure was accompanied by an increase in the high-temperature strength and a shift in the upper limit of the temperature stability interval towards high temperatures, of up to 900 °C. It was assumed that the polygonal state inside the grains contributed to the implementation of cooperative mechanisms of the dislocation-disclination type, which ensured the accommodation of the material in the "high-strength state" under loading.

Structure and Phase Composition of a W-Ta-Mo-Nb-V-Cr-Zr-Ti Alloy Obtained by Ball Milling and Spark Plasma Sintering.

In this paper, the structural characteristics of a W-Ta-Mo-Nb-V-Cr-Zr-Ti non-equiatomic refractory metal alloy obtained by spark plasma sintering (SPS) of a high-energy ball-milled powder mixture are reported. High-energy ball milling resulted in the formation of particle agglomerates ranging from several tens to several hundreds of micrometers. These agglomerates were composed of micrometer and submicrometer particles. It was found that, during ball milling, a solid solution of A2 structure formed. The grains of the sintered material ranged from fractions of a micrometer to several micrometers. During SPS, the phase transformations in the alloy led to the formation of a Laves phase of C15 structure and ZrO and ZrO2 nanoparticles. The microhardness of the ball-milled alloy and sintered material was found to be 9.28 GPa ± 1.31 GPa and 8.95 GPa ± 0.42 GPa, respectively. The influence of the processing conditions on the structure, phase composition, and microhardness of the alloy is discussed.