RESUMO
Here, we report on the time dependence of a synthesis procedure for generation of both n- and p-type bismuth telluride-based materials. To initiate the reaction, the starting materials were first mechanical pre-reacted. The Rietveld refinements of X-ray diffraction (XRD) data collected after different milling times demonstrate that Bi2Te3 was formed after only 10 min, and longer milling times do not alter the composition. To complete the phase formation, the powders were treated by field-assisted sintering and heat treatment afterwards. The effect of this fast procedure on the structural and thermoelectric properties was investigated. Samples were obtained with relative densities above 99%. A clear preferred orientation of the crystallites in the samples is evidenced by Rietveld refinements of XRD data. The thermoelectric characteristics demonstrate a good performance despite the short milling time. Further, it was demonstrated for this fast synthesis that the physical transport properties can be varied with well-known n- and p-type dopants like CHI3 or Pb. For these non-optimized materials, a ZT value of 0.7 (n-type) and 0.9 (p-type) between 400 and 450 K was achieved. The long-term stability is demonstrated by repeated measurements up to 523 K showing no significant alteration of the thermoelectric performance.
RESUMO
Various electrode materials are considered for sodium-ion batteries (SIBs) and one important prerequisite for developments of SIBs is a detailed understanding about charge storage mechanisms. Herein, we present a rigorous study about Na storage properties of ultra-small Fe3S4 nanoparticles, synthesized applying a solvothermal route, which exhibit a very good electrochemical performance as anode material for SIBs. A closer look into electrochemical reaction pathways on the nanoscale, utilizing synchrotron-based X-ray diffraction and X-ray absorption techniques, reveals a complicated conversion mechanism. Initially, separation of Fe3S4 into nanocrystalline intermediates occurs accompanied by reduction of Fe3+ to Fe2+ cations. Discharge to 0.1 V leads to formation of strongly disordered Fe0 finely dispersed in a nanosized Na2S matrix. The resulting volume expansion leads to a worse long-term stability in the voltage range 3.0-0.1 V. Adjusting the lower cut-off potential to 0.5 V, crystallization of Na2S is prevented and a completely amorphous intermediate stage is formed. Thus, the smaller voltage window is favorable for long-term stability, yielding highly reversible capacity retention, e.g., 486 mAh g-1 after 300 cycles applying 0.5 A g-1 and superior coulombic efficiencies >99.9%. During charge to 3.0 V, Fe3S4 with smaller domains are reversibly generated in the 1st cycle, but further cycling results in loss of structural long-range order, whereas the local environment resembles that of Fe3S4 in subsequent charged states. Electrokinetic analyses reveal high capacitive contributions to the charge storage, indicating shortened diffusion lengths and thus, redox reactions occur predominantly at surfaces of nanosized conversion products.
