Correction of complex three-dimensional deformities at the proximal femur using indirect reduction with angle blade plate and patient-specific instruments: a technical note.

BACKGROUND: Corrective osteotomies for complex proximal femoral deformities can be challenging; wherefore, subsidies in preoperative planning and during surgical procedures are considered helpful. Three-dimensional (3D) planning and patient-specific instruments (PSI) are already established in different orthopedic procedures. This study gives an overview on this technique at the proximal femur and proposes a new indirect reduction technique using an angle blade plate. METHODS: Using computed tomography (CT) data, 3D models are generated serving for the preoperative 3D planning. Different guides are used for registration of the planning to the intraoperative situation and to perform the desired osteotomies with the following reduction task. A new valuable tool to perform the correction is the use of a combined osteotomy and implant-positioning guide, with indirect deformity reduction over an angle blade plate. RESULTS: An overview of the advantages of 3D planning and the use of PSI in complex corrective osteotomies at the proximal femur is provided. Furthermore, a new technique with indirect deformity reduction over an angle blade plate is introduced. CONCLUSION: Using 3D planning and PSI for complex corrective osteotomies at the proximal femur can be a useful tool in understanding the individual deformity and performing the aimed deformity reduction. The indirect reduction over the implant is a simple and valuable tool in achieving the desired correction, and concurrently, surgical exposure can be limited to a subvastus approach.

Femoral Bone Restoration Patterns in Revision Total Hip Arthroplasty Using Distally Fixed Modular Tapered Titanium Stems and an Extended Trochanteric Osteotomy Approach.

BACKGROUND: Mechanical failure of modular revision stems is a serious complication in revision total hip arthroplasty. The lack of adequate osseous support to the proximal component, especially in cases of an extended trochanteric osteotomy approach, is considered a risk factor for stem failure. In this study, we analyze proximal bone regeneration patterns in patients undergoing revision total hip arthroplasty for aseptic stem loosening through an extended trochanteric osteotomy approach using an uncemented dual modular stem. METHODS: Fifty-four patients treated for aseptic stem loosening were radiologically reviewed. The femur was divided according to the Gruen zones. Preoperative bone loss, formation of new cancellous bone, and presence of direct osseous contact to the stem were noted right away for each Gruen zone. The presence of osseous support at the modular junction and the proximal component were examined. RESULTS: All patients showed restoration of proximal bone mass at final follow up. New bone formation was first seen in more distally located Gruen zones. Cases with longer proximal components had a trend toward earlier osseous support at the modular junction. Overall, 75% of patients showed osseous support at the modular junction 2 years after surgery. CONCLUSION: Restoration of proximal bone occurs in a distal to proximal direction. Shorter proximal components require more time until osseous support to the modular junction is achieved, which may result in a higher risk of mechanical failure. Based on this study, bony support at the modular junction should not be expected in 25% of cases 2 years after surgery.

The posterior ridge of the greater tuberosity of the humerus: a suitable landmark for the posterior approach to the shoulder joint?

BACKGROUND: The purpose of this study was to evaluate the posterior ridge of the greater tuberosity, a palpable prominence during surgery, as a landmark for the posterior approach to the glenohumeral joint. METHODS: Twenty-five human cadaveric shoulders were dissected. In 5 cases, a full-thickness rotator cuff tear was present. The posterior surgical anatomy was defined, and the distance from the ridge to the interval between the infraspinatus (IS) and teres minor (TM) muscle, the distance from the ridge to the inferior border of the glenoid (IBG), and the distance between the IS-TM interval and the IBG were determined. RESULTS: In all specimens, a prominent ridge on the posterior greater tuberosity lateral to the articular margin could be identified. The IS-TM interval was located, on average, 3 mm proximal to this ridge. The IS-TM interval corresponded to a point 5 mm proximal to the IBG. In all shoulders, the ridge was located, on average, 8 mm proximal to the IBG. The plane of the IS-TM interval showed a vertically oblique direction. CONCLUSION: The posterior ridge of the greater tuberosity is a suitable landmark to locate the internervous plane between the IS and TM and should not be crossed distally. Unlike other landmarks, the ridge moves with the humeral head, making it is less dependent on the patient's size, sex, and arm position and the quality of the rotator cuff. The ridge is always located proximal to the insertion of the TM and IBG.

The interaction between the vastus medialis and vastus intermedius and its influence on the extensor apparatus of the knee joint.

PURPOSE: Although the vastus medialis (VM) is closely associated with the vastus intermedius (VI), there is a lack of data regarding their functional relationship. The purpose of this study was to investigate the anatomical interaction between the VM and VI with regard to their origins, insertions, innervation and function within the extensor apparatus of the knee joint. METHODS: Eighteen human cadaveric lower limbs were investigated using macro-dissection techniques. Six limbs were cut transversely in the middle third of the thigh. The mode of origin, insertion and nerve supply of the extensor apparatus of the knee joint were studied. The architecture of the VM and VI was examined in detail, as was their anatomical interaction and connective tissue linkage to the adjacent anatomical structures. RESULTS: The VM originated medially from a broad hammock-like structure. The attachment site of the VM always spanned over a long distance between: (1) patella, (2) rectus femoris tendon and (3) aponeurosis of the VI, with the insertion into the VI being the largest. VM units were inserted twice-once on the anterior and once on the posterior side of the VI. The VI consists of a complex multi-layered structure. The layers of the medial VI aponeurosis fused with the aponeuroses of the tensor vastus intermedius and vastus lateralis. Together, they form the two-layered intermediate layer of the quadriceps tendon. The VM and medial parts of the VI were innervated by the same medial division of the femoral nerve. CONCLUSION: The VM consists of multiple muscle units inserting into the entire VI. Together, they build a potential functional muscular complex. Therefore, the VM acts as an indirect extensor of the knee joint regulating and adjusting the length of the extensor apparatus throughout the entire range of motion. It is of clinical importance that, besides the VM, substantial parts of the VI directly contribute to the medial pull on the patella and help to maintain medial tracking of the patella during knee extension. The interaction between the VM and VI, with responsibility for the extension of the knee joint and influence on the patellofemoral function, leads readily to an understanding of common clinical problems found at the knee joint as it attempts to meet contradictory demands for both mobility and stability. Surgery or trauma in the anteromedial aspect of the quadriceps muscle group might alter a delicate interplay between the VM and VI. This would affect the extensor apparatus as a whole.

Evaluation of ninety-six periprosthetic hip joint infections seen within five consecutive years.

Periprosthetic hip joint infections (PHJI) are severe complications. In 2003 Zimmerli published a well-noted treatment algorithm for PHJI. The aim of this study is to evaluate outcome, analyze the applied treatment regimen and compare it to the proposed algorithm. We evaluated the outcome of 96 PHJI treated at our institution between 2008 and 2012 and analysed adherence to the algorithm and outcome in coherence with the algorithm. The operations performed were irrigation and debridement with exchange of mobile parts (45%), two-stage exchange (36%), one-stage exchange (12%) and permanent explantation (7%). 47% were acute infections, 53% were chronic. Staphylococcus aureus was the most common pathogen. The overall success rate was 88%. In 12% of the cases the chosen operation didn't follow the algorithm. Of these only 10% was successfully treated with the primary operation. We find that the algorithm proposed by Zimmerli is a useful tool and easy to translate into clinical practice. When followed it yields a high success rate.

Magnetic resonance imaging of the tensor vastus intermedius: A topographic study based on anatomical dissections.

The tensor of the vastus intermedius (TVI) is a newly described component of the extensor apparatus of the knee joint. The objective of this study was to evaluate the appearance of the TVI on magnetic resonance (MR) imaging and its association with the adjacent vastus lateralis (VL) and vastus intermedius (VI) muscles and to compare these findings with the corresponding anatomy. MR images were analyzed from a cadaveric thigh where the TVI, as part of the extensor apparatus of the knee joint, had been dissected. The course of the TVI in relation to the adjacent VL and VI was studied. The anatomic dissection and MR imaging revealed a multilayered organization of the lateral extensor apparatus of the knee joint. The TVI is an intervening muscle between the VL and VI that combined into a broad flat aponeurosis in the midthigh and merged into the quadriceps tendon. Dorsally, the muscle fibers of the TVI joined those of the VL and VI and blended into the attachment at the lateral lip of the linea aspera. In this area, distinguishing between these three muscles was not possible macroscopically or virtually by MR imaging. In the dorsal aspect, the onion-like muscle layers of the VL, TVI, and VI fuse to a hardly separable muscle mass indicating that these muscles work in conjunction to produce knee extension torque when knee joint action is performed. Clin. Anat. 30:1096-1102, 2017. © 2017 Wiley Periodicals, Inc.

Modified Extended Trochanteric Osteotomy for the Treatment of Vancouver B2/B3 Periprosthetic Fractures of the Femur.

BACKGROUND: Femoral component revision is the treatment of choice for Vancouver type B2/B3 periprosthetic femur fractures (PFFs). The purpose of this study was to report the clinical outcome of revision total hip arthroplasty with the use of a modified extended trochanteric osteotomy (ETO) in PFF treatment. METHODS: A total of 43 cases between 2000 and 2014 were analyzed. Clinical and radiographic evaluation was performed with a mean follow-up of 40 months. Patient survival after revision surgery, complications, radiographic outcomes, and quality of life and hip function were assessed. RESULTS: Merle d'Aubignè and Postel score averaged 15, and mean postoperative Harris hip score was 70. Radiographic evaluation revealed that the ETO and fractures healed in all but 1 patient within 9 months. Component stability and apparent osseointegration were not coincident with healing of the osteotomy and fracture sites proximal to the inserted stem. Six patients (15%) developed postoperative complications, which included the following: 1 nonunion with progressive subsidence, 2 hip dislocations, 2 deep infections, and 1 breakage of the modular junction of the revision stem. CONCLUSION: The modified ETO with a lateral approach to the hip for the treatment of PFF is compatible with fracture healing, a low dislocation rate, and good clinical results. However, component stability and apparent osseointegration are coincident with fracture healing only in the distal aspect of the inserted stem. Absence of proximal osseointegration might lead to poor osseous support resulting in inadequate fatigue strength at the junction of the dual modular revision stem.

The Anatomy of the Articularis Genus Muscle and Its Relation to the Extensor Apparatus of the Knee.

BACKGROUND: The anatomy of the articularis genus muscle has prompted speculation that it elevates the suprapatellar bursa during extension of the knee joint. However, its architectural parameters indicate that this muscle is not capable of generating enough force to fulfill this function. The purpose of the present study was to investigate the anatomy of the articularis genus, with special emphasis on its relationship with the adjacent vastus intermedius and vastus medialis muscles. METHODS: The articularis genus muscle was investigated in 18 human cadaveric lower limbs with use of macrodissection techniques. All components of the quadriceps muscle group were traced from origin to insertion, and their affiliations were determined. Six limbs were cut transversely in the middle third of the thigh. The modes of origin and insertion of the articularis genus, its nerve supply, and its connections with the vastus intermedius and vastus medialis were studied. RESULTS: The muscle bundles of the articularis genus were organized into 3 main layers: superficial, intermediate, and deep. The bundles of the superficial layer and, in 60% of the specimens, the bundles of the intermediate layer originated from both the vastus intermedius and the anterior and anterolateral surfaces of the femur. The bundles of the deep layer and, in 40% of the specimens, the bundles of the intermediate layer arose solely from the anterior surface of the femur. The distal insertion sites included different levels of the suprapatellar bursa and the joint capsule. A number of connections between the articularis genus and the vastus intermedius were found. While the vastus medialis inserted into the whole length of the vastus intermedius aponeurosis, it included muscle fibers of the articularis genus, building an intricate muscle system supplied by nerve branches of the same medial deep division of the femoral nerve. CONCLUSIONS: The articularis genus, vastus medialis, and vastus intermedius have a complex, interacting architecture, suggesting that the articularis genus most likely does not act as an independent muscle. With support of the vastus intermedius and vastus medialis, the articularis genus might be able to function as a retractor of the suprapatellar bursa. The finding of likely interplay between the articularis genus, vastus intermedius, and vastus medialis is supported by their concurrent innervation. CLINICAL RELEVANCE: The association between the articularis genus, vastus medialis, and vastus intermedius may be more complex than previously believed, and this close anatomical connection could have functional implications for knee surgery. Dysfunction, scarring, or postoperative arthrofibrosis of the sophisticated interactive mechanism needs further investigation.

New insight in the architecture of the quadriceps tendon.

BACKGROUND: Published data regarding the structure of the quadriceps tendon are diverse. Dissection of the quadriceps muscle group revealed that beside the rectus femoris, vastus lateralis, vastus intermedius and vastus medialis a fifth muscle component- named the tensor vastus intermedius consistently fused into quadriceps tendon. It can be hypothesized that all these elements of the extensor apparatus of the knee joint must also be represented in the quadriceps tendon. This study investigated the multi-layered quadriceps tendon with special emphasis on all components of the quadriceps muscle group including the newly discovered tensor vastus intermedius. METHODS: Ten cadaveric lower limbs were dissected. All muscle bellies of the extensor apparatus of the knee joint were identified and traced distally until they merged into the quadriceps tendon. Connections between the different aponeurotic layers of each muscle were studied from origin to insertion. The fusing points of each layer were marked. Their distance to the patella and the distances between the fusing points were measured. RESULTS: Six elements of the quadriceps muscle group form a tri-laminar structure of the quadriceps tendon. The intermediate layer could be further sub-divided. The elements of the quadriceps tendon are 1. lateral aponeurosis of the vastus intermedius, 2. deep and 3. superficial medial aponeurosis of the vastus intermedius, 4. vastus lateralis, 5. tensor vastus intermedius and 6. rectus femoris. Even with differences in fiber direction - these elements join each other a certain distance proximal to the patella. All elements were fused over a region measuring 13 to 90 mm proximal to the patella. Lateral parts of the vastus intermedius formed the deepest layer of the quadriceps tendon. The superficial and deep layer of the medial vastus intermedius aponeurosis fused 56 mm (range, 30 to 90 mm) and 33 mm (range, 13 to 53 mm) above the patella with the aponeurosis of the tensor vastus intermedius and vastus lateralis respectively. Together they built the two-layered intermediate layer of the quadriceps tendon. The tendon of the rectus femoris forms the superficial layer. The vastus medialis inserts medially in all layers of the quadriceps tendon. Fibers of the lateral muscle components were oriented towards the medial, and fibers of the medial muscle components were oriented towards the lateral femoral condyle. CONCLUSIONS: The three-layered quadriceps tendon is formed by six elements. These are 1. lateral aponeurosis of the vastus intermedius, 2. deep and 3. superficial medial aponeurosis of the vastus intermedius, 4. vastus lateralis, 5. tensor vastus intermedius and 6. rectus femoris. These elements of the extensor apparatus join each other proximal to the patella in a complex onion-like architecture. Its two-layered intermediate layer shows variable fusions points. The vastus medialis contributes to the quadriceps tendon with its medial insertion into all layers of the quadriceps tendon.

Tibial tubercle osteotomy to improve exposure in complex knee fractures: A cadaveric study and case series.

Adequate exposure is fundamental to safely and correctly perform open procedures around the knee. Tibial tubercle osteotomy (TTO) has previously been described as a method to improve exposure, particularly in complex primary elective knee arthroplasty or revision surgery. We describe a tibial tubercle osteotomy technique to improve exposure in complex knee fractures and a cadaveric study and trauma case series. METHODS: A cadaveric study using 8 knee specimens was conducted using a lateral subvastus approach to the knee. Standardised pictures were taken of the exposure, the tibial tubercle osteotomy was performed and pictures were taken of the new exposed area. These images were compared using a computer program that calculated the area of exposure before and after tibial tubercle osteotomy and the results analysed. The technique was then used in a case series of 6 different complex knee fractures including three distal femoral, one periprosthetic distal femur and two tibial plateau fractures. The outcomes of these patients were followed clinically and radiologically. RESULTS: All specimens in the cadaveric study demonstrated an increase in area of exposure after the TTO with a mean increase of 148%. All tibial tubercle osteotomies performed in the trauma case series were united by 6 months without complication. CONCLUSIONS: Tibial tubercle osteotomy is a recognised technique for improving exposure to the knee. This has been demonstrated in a cadaveric study and in a case series of six complex fractures around the knee. If performed properly, this technique can be extended to appropriate trauma cases with good results.

The Anatomical Course of the Lateral Femoral Cutaneous Nerve with Special Attention to the Anterior Approach to the Hip Joint.

BACKGROUND: Injury to the lateral femoral cutaneous nerve (LFCN) is a risk during the operative anterior approach to the hip joint. Although several anatomical studies have described the proximal course of the nerve in relation to the anterior superior iliac spine (ASIS) and the inguinal ligament, the distal course of the LFCN in the proximal aspect of the thigh has not been sufficiently studied. The aim of this cadaveric study was to examine the branching pattern of the nerve, with special consideration to the anterior approach to the hip joint. METHODS: Twenty-eight cadaveric hemipelves from 18 donors (10 paired and 8 unpaired specimens) were dissected. The LFCN branches were localized proximal to the inguinal ligament and traced distally into the area of the proximal aspect of the thigh. Distribution patterns of the nerve with respect to its relationship to the ASIS and the internervous plane of the anterior approach to the hip joint were recorded. RESULTS: We found 3 different branching patterns of the LFCN: sartorius-type (in 36% of the specimens), characterized by a dominant anterior nerve branch coursing along the lateral border of the sartorius muscle with no, or only a thin, posterior branch; posterior-type (in 32%), characterized by a strong posterior nerve branch; and fan-type (in 32%), characterized by multiple spreading nerve branches of equal thickness. In 50% of the specimens, the LFCN divided into ≥2 branches superior to the inguinal ligament. Sixty-two percent of the LFCN branches entered the proximal aspect of the thigh medial to the ASIS; 27%, above; and 11%, lateral to the ASIS. The LFCN consistently coursed within the deep layer of the subcutaneous fat tissue. CONCLUSIONS: Injury to branches of the LFCN cannot be avoided in approximately one-third of surgical dissections that use the anterior approach to the hip joint. To protect the anterior branch of the LFCN, the skin incision should be as lateral as possible. The posterior branch of the LFCN is most vulnerable in the proximal aspect of the anterior approach to the hip joint, where it can be expected to course within the deep layer of the subcutaneous tissue.

Osteolytic changes around biodegradable cement restrictors in hip surgery.

Background and purpose - Biodegradable cement restrictors are widely used in hip arthroplasty. Like others, we observed osteolytic reactions associated with a specific cement restrictor (SynPlug; made of PolyActive) and reviewed our patients. Patients and methods - We identified 703 patients with suitable radiographs from our database (2007 to 2012) who underwent cemented hip arthroplasty and received a SynPlug biodegradable cement restrictor. We reviewed all available radiographs to determine the incidence, severity, and progression of osteolysis. Mean postoperative follow-up was 1.8 (1-7) years Results - 1 year after implantation, the femoral cortex showed thinning by 12% in the anterior-posterior view and by 8% in the axial view. This had increased to 14% and 12%, respectively, at the latest available follow-up postoperatively (at a mean of 4 years). Cortical thinning of less than 10% was found in 37% of patients, but cortical thinning of 10-30% was found in 56% of patients. In the remaining 7%, a reduction of more than 30% of the original cortical thickness was observed. Interpretation - Osteolytic changes associated with the SynPlug biodegradable bone restrictors are inconsistent and highly variable. While some patients showed increased weakening of the femoral cortex with the potential risk of periprosthetic fracture, in others the degree of osteolysis only increased slightly or stabilized after 2 or more years. Any cortical bone loss after total hip replacement should be avoided, so the use of PolyActive biodegradable cement restrictors should be discontinued. Patients with a PolyActive cement restrictor in place should be followed up closely after surgery.

Potential Risk to the Superior Gluteal Nerve During the Anterior Approach to the Hip Joint: An Anatomical Study.

BACKGROUND: The anterior approach to the hip joint is widely used in pediatric and adult orthopaedic surgery, including hip arthroplasty. Atrophy of the tensor fasciae latae muscle has been observed in some cases, despite the use of this internervous approach. We evaluated the nerve supply to the tensor fasciae latae and its potential risk for injury during the anterior approach to the hip joint. METHODS: Cadaveric hemipelves (n = 19) from twelve human specimens were dissected. The course of the nerve branch to the tensor fasciae latae muscle, as it derives from the superior gluteal nerve, was studied in relation to the ascending branch of the lateral circumflex femoral artery where it enters the tensor fasciae latae. RESULTS: The nerve supply to the tensor fasciae latae occurs in its proximal half by divisions of the inferior branch of the superior gluteal nerve. The nerve branches were regularly coursing in the deep surface on the medial border of the tensor fasciae latae muscle. In seventeen of nineteen cases, one or two nerve branches entered the tensor fasciae latae within 10 mm proximal to the entry point of the ascending branch of the lateral circumflex femoral artery. CONCLUSIONS: Coagulation of the ascending branch of the lateral circumflex femoral artery and the placement of retractors during the anterior approach to the hip joint carry the potential risk for injury to the motor nerve branches supplying the tensor fasciae latae. CLINICAL RELEVANCE: During the anterior approach, the ligation or coagulation of the ascending branch of the lateral circumflex femoral artery should not be performed too close to the point where it enters the tensor fasciae latae. The nerve branches to the tensor fasciae latae could also be compromised by the extensive use of retractors, broaching of the femur during hip arthroplasty, or the inappropriate proximal extension of the anterior approach.

Limitations of the Vastus Lateralis Muscle as a Substitute for Lost Abductor Muscle Function: An Anatomical Study.

Abductor insufficiency after hip arthroplasty resulting from an impaired gluteus medius and minimus remains an unsolved problem in orthopaedic surgery. The vastus lateralis (VL) was described as a functional substitute for abductor insufficiency in 2004. We carried out a macrodissection of twelve cadaveric hemipelvises to investigate the innervation of the VL and adjacent muscles to assess the extent the VL can be safely transferred. Results showed that direct muscle branches to proximal portions of the VL are too short to allow a significant shift; the shift may be as small as 13 mm. Nerves that supply the VL also extend to the vastus intermedius. This innervation pattern makes it impossible to shift the VL significantly without damaging branches to both.

Distal extension of the direct anterior approach to the hip poses risk to neurovascular structures: an anatomical study.

BACKGROUND: The anterior approach to the hip gained popularity for total hip arthroplasty in recent years. Distal extension of the anterior approach, sometimes needed intraoperatively, potentially endangers neurovascular structures to the quadriceps. The aim of this study was to determine the anatomical structures placed at risk by distal extension of the anterior approach to the hip. METHODS: Seventeen cadaveric hemipelves from twelve human specimens were dissected. The femoral nerve and its branches and the vessels arising from the lateral femoral circumflex artery were assessed in relation to the distal extension of the anterior approach. The damage caused by the introduction of a cerclage cable passer was also investigated. RESULTS: The area immediately distal to the intertrochanteric line is a common entry point for several nerve branches and is a useful distal landmark for surgeons to use to protect important neurovascular structures. The distal extension of the anterior approach compromises the nerve supply to the anterolateral portions of the quadriceps. Introduction of a cerclage cable passer through the anterior access also jeopardizes nerve branches to the vastus lateralis, lateral parts of the vastus intermedius, and branches of the lateral femoral circumflex artery. CONCLUSIONS: Distal extension of the direct anterior approach to the hip is challenging to accomplish without neurovascular injury to anterolateral parts of the quadriceps muscle group. In addition, important neurovascular structures are endangered with the introduction of a cable passer through the anterior approach. CLINICAL RELEVANCE: Distal extension of the direct anterior approach to the hip beyond the intertrochanteric line may compromise neurovascular structures supplying the quadriceps muscle.

Dynamic plate osteosynthesis for fracture stabilization: how to do it.

Plate osteosynthesis is one treatment option for the stabilization of long bones. It is widely accepted to achieve bone healing with a dynamic and biological fixation where the perfusion of the bone is left intact and micromotion at the fracture gap is allowed. The indications for a dynamic plate osteosynthesis include distal tibial and femoral fractures, some midshaft fractures, and adolescent tibial and femoral fractures with not fully closed growth plates. Although many lower limb shaft fractures are managed successfully with intramedullary nails, there are some important advantages of open-reduction-and-plate fixation: the risk of malalignment, anterior knee pain, or nonunion seems to be lower. The surgeon performing a plate osteosynthesis has the possibility to influence fixation strength and micromotion at the fracture gap. Long plates and oblique screws at the plate ends increase fixation strength. However, the number of screws does influence stiffness and stability. Lag screws and screws close to the fracture site reduce micromotion dramatically.DYNAMIC PLATE OSTEOSYNTHESIS CAN BE ACHIEVED BY APPLYING SOME SIMPLE RULES: long plates with only a few screws should be used. Oblique screws at the plate ends increase the pullout strength. Two or three holes at the fracture site should be omitted. Lag screws, especially through the plate, must be avoided whenever possible. Compression is not required. Locking plates are recommended only in fractures close to the joint. When respecting these basic concepts, dynamic plate osteosynthesis is a safe procedure with a high healing and a low complication rate.