Culture-independent techniques for rapid detection of bacteria associated with loss of chloramine residual in a drinking water system.

Chloramination is often the disinfection regimen of choice for extended drinking water systems. However, this process is prone to instability due to the growth of nitrifying bacteria. This is the first study to use alternative approaches for rapid investigation of chloraminated drinking water system instability in which flow cytometric cell sorting of bacteria with intact membranes (membrane-intact fraction) (BacLight kit) or with active esterases (esterase-active fraction) (carboxyfluorescein diacetate) was combined with 16S rRNA gene-directed PCR and denaturing gradient gel electrophoresis (DGGE). No active bacteria were detected when water left the water treatment plant (WTP), but 12 km downstream the chloramine residual had diminished and the level of active bacteria in the bulk water had increased to more than 1 x 10(5) bacteria ml(-1). The bacterial diversity in the system was represented by six major DGGE bands for the membrane-intact fraction and 10 major DGGE bands for the esterase-active fraction. PCR targeting of the 16S rRNA gene of chemolithotrophic ammonia-oxidizing bacteria (AOB) and subsequent DGGE and DNA sequence analysis revealed the presence of an active Nitrosospira-related species and Nitrosomonas cryotolerans in the system, but no AOB were detected in the associated WTP. The abundance of active AOB was then determined by quantitative real-time PCR (qPCR) targeting the amoA gene; 3.43 x 10(3) active AOB ml(-1) were detected in the membrane-intact fraction, and 1.40 x 10(4) active AOB ml(-1) were detected in the esterase-active fraction. These values were several orders of magnitude greater than the 2.5 AOB ml(-1) detected using a routine liquid most-probable-number assay. Culture-independent techniques described here, in combination with existing chemical indicators, should allow the water industry to obtain more comprehensive data with which to make informed decisions regarding remedial action that may be required either prior to or during an instability event.

Enumeration of water-borne bacteria using viability assays and flow cytometry: a comparison to culture-based techniques.

Maintaining optimal conditions in catchments or distribution systems relies heavily on water authorities having access to rapid and accurate water quality data, including an indication of bacteriological quality. In this study, the BacLight bacterial viability kit and carboxyfluorescein diacetate (CFDA) were coupled with flow cytometry (FCM) for rapid detection of physiologically active bacteria from raw and potable waters taken from various locations around South Australia. Results were compared to the direct viable count (DVC) and quantitative DVC (qDVC), in addition to the culture-based methods of the heterotrophic plate count (HPC) and a commercial SimPlate technique. Raw and potable water analysis revealed that DVC and culture-based techniques reported significantly fewer viable bacteria compared to the number of physiologically active bacteria detected using the rapid FCM assays, where this difference appeared to be nonlinear across different samples. Inconclusive results were obtained using qDVC as a viability assay. In particular, HPC results were 2-4 log orders of magnitude below that reported by the FCM assays for raw waters. Few bacteria in potable waters examined were culturable by HPC, even though FCM assays reported between 5.56 x 10(2) and 3.94 x 10(4) active bacteria ml(-1). These differences may be attributed to the presence of nonheterotrophic bacteria, sublethal injury or the adoption of an active but nonculturable (ABNC) state.

A comparative study of carboxyfluorescein diacetate and carboxyfluorescein diacetate succinimidyl ester as indicators of bacterial activity.

Staining bacteria with esterified fluorogenic substrates followed by flow cytometric analysis offers a means for rapid detection of metabolically active bacteria. Flow cytometry (FCM) was used to assess carboxyfluorescein diacetate (CFDA) and carboxyfluorescein diacetate succinimidyl ester (CFDA/SE) as indicators of bacterial activity for cultured bacteria, including Aeromonas hydrophila, Bacillus subtilis, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus epidermidis and bacteria from environmental waters. In theory, CFDA/SE should be a better indicator of metabolic bacterial activity compared to CFDA due to greater intracellular retention of the fluorescent product. Qualitative and quantitative analysis of exponential phase cultures, mixtures of active and inactive cells and bacteria from environmental waters revealed CFDA was successful in detecting active bacteria, whereas CFDA/SE was not. CFDA/SE labelled inactive cells with intensities equal to that of the active population and could not even discriminate between bacteria in exponential phase growth and a fixed cell preparation. We propose that the specific mode of action of the succinimidyl ester (SE) group in combination with the nonenzymatic aqueous hydrolysis of the CFDA moiety results in the nonspecific labelling of all cells, irrespective of their metabolic state. This study shows that CFDA/SE is a poor marker of bacterial activity.