Ensifer adhaerens strain OV14 seed application enhances Triticum aestivum L. and Brassica napus L. development.

Given the challenges imposed by climate change and societal challenges, the European Union established ambitious goals as part of its Farm to Fork (F2F) strategy. Focussed on accelerating the transition to systems of sustainable food production, processing and consumption, a key element of F2F is to reduce the use of fertilisers by at least 20% and plant protection products by up to 50% by 2030. In recent years, a substantial body of research has highlighted the potential impact of microbial-based applications to support crop production practices through both biotic/abiotic stresses via maintaining or even improving yields and reducing reliance on intensive chemical inputs. Here, we have characterised the ability of a new soil-borne free-living bacterium strain Ensifer adhaerens OV14 (EaOV14) to significantly enhance crop vigour index by up to 50% for monocot (wheat, Triticum aestivum L., p < 0.0001) and by up to 40% for dicot (oilseed rape, Brassica napus L., p < 0.0001) species under in-vitro conditions (n = 360 seedlings/treatment). The beneficial effect was further studied under controlled glasshouse growing conditions (n = 60 plants/treatment) where EaOV14 induced significantly increased seed yield of spring oilseed rape compared to the controls (p < 0.0001). Moreover, using bespoke rhizoboxes, enhanced root architecture (density, roots orientation, roots thickness etc.) was observed for spring oilseed rape and winter wheat, with the median number of roots 55% and 33% higher for oilseed rape and wheat respectively, following EaOV14 seed treatment compared to the control. In addition, EaOV14 treatment increased root tip formation and root volume, suggesting the formation of a more robust root system architecture post-seed treatment. However, like other microbial formulations, the trade-offs associated with field translation, such as loss or limited functionality due to inoculum formulation or environmental distress, need further investigation. Moreover, the delivery method requires further optimisation to identify the optimal inoculum formulation that will maximise the expected beneficial impact on yield under field growing conditions.

Improving the Hydrophobicity of Plasticized Polyvinyl Chloride for Use in an Endotracheal Tube.

An endotracheal tube (ETT) is a greatly appreciated medical device at the global level with widespread application in the treatment of respiratory diseases, such as bronchitis and asthma, and in general anesthesia, to provide narcotic gases. Since an important quantitative request for cuffed ETTs was recorded during the COVID-19 pandemic, concerns about infection have risen. The plasticized polyvinyl chloride (PVC) material used to manufacture ETTs favors the attachment of microorganisms from the human biological environment and the migration of plasticizer from the polymer that feeds the microorganisms and promotes the growth of biofilms. This leads to developing infections, which means additional suffering, discomfort for patients, and increased hospital costs. In this work, we propose to modify the surfaces of some samples taken from commercial ETTs in order to develop their hydrophobic character using surface fluorination by a plasma treatment in SF6 discharge and magnetron sputtering physical evaporation from the PTFE target. Samples with surfaces thus modified were subsequently tested using XPS, ATR-FTIR, CA, SEM + EDAX, profilometry, density, Shore A hardness, TGA-DSC, and biological antimicrobial and biocompatibility properties. The obtained results demonstrate a successful increase in the hydrophobic character of the plasticized PVC samples and biocompatibility properties.

Influence of Lavender Essential Oil on the Physical and Antibacterial Properties of Chitosan Sponge for Hemostatic Applications.

Uncontrollable bleeding continues to stand as the primary cause of fatalities globally following surgical procedures, traumatic incidents, disasters, and combat scenarios. The swift and efficient management of bleeding through the application of hemostatic agents has the potential to significantly reduce associated mortality rates. One significant drawback of currently available hemostatic products is their susceptibility to bacterial infections at the bleeding site. As this is a prevalent issue that can potentially delay or compromise the healing process, there is an urgent demand for hemostatic agents with antibacterial properties to enhance survival rates. To mitigate the risk of infection at the site of a lesion, we propose an alternative solution in the form of a chitosan-based sponge and antimicrobial agents such as silver nanoparticles (AgNPs) and lavender essential oil (LEO). The aim of this work is to provide a new type of hemostatic sponge with an antibacterial barrier against a wide range of Gram-positive and Gram-negative microorganisms: Staphylococcus epidermidis 2018 and Enterococcus faecalis VRE 2566 (Gram-positive strains) and Klebsiella pneumoniae ATCC 10031 and Escherichia coli ATCC 35218 (Gram-negative strains).

Chitosan-Based Biomaterials for Hemostatic Applications: A Review of Recent Advances.

Hemorrhage is a detrimental event present in traumatic injury, surgery, and disorders of bleeding that can become life-threatening if not properly managed. Moreover, uncontrolled bleeding can complicate surgical interventions, altering the outcome of surgical procedures. Therefore, to reduce the risk of complications and decrease the risk of morbidity and mortality associated with hemorrhage, it is necessary to use an effective hemostatic agent that ensures the immediate control of bleeding. In recent years, there have been increasingly rapid advances in developing a novel generation of biomaterials with hemostatic properties. Nowadays, a wide array of topical hemostatic agents is available, including chitosan-based biomaterials that have shown outstanding properties such as antibacterial, antifungal, hemostatic, and analgesic activity in addition to their biocompatibility, biodegradability, and wound-healing effects. This review provides an analysis of chitosan-based hemostatic biomaterials and discusses the progress made in their performance, mechanism of action, efficacy, cost, and safety in recent years.

Antimicrobial Solutions for Endotracheal Tubes in Prevention of Ventilator-Associated Pneumonia.

Ventilator-associated pneumonia is one of the most frequently encountered hospital infections and is an essential issue in the healthcare field. It is usually linked to a high mortality rate and prolonged hospitalization time. There is a lack of treatment, so alternative solutions must be continuously sought. The endotracheal tube is an indwelling device that is a significant culprit for ventilator-associated pneumonia because its surface can be colonized by different types of pathogens, which generate a multispecies biofilm. In the paper, we discuss the definition of ventilator-associated pneumonia, the economic burdens, and its outcomes. Then, we present the latest technological solutions for endotracheal tube surfaces, such as active antimicrobial coatings, passive coatings, and combinatorial methods, with examples from the literature. We end our analysis by identifying the gaps existing in the present research and investigating future possibilities that can decrease ventilator-associated pneumonia cases and improve patient comfort during treatment.

Essential Oils as Antimicrobial Active Substances in Wound Dressings.

Wound dressings for skin lesions, such as bedsores or pressure ulcers, are widely used for many patients, both during hospitalization and in subsequent treatment at home. To improve the treatment and shorten the healing time and, therefore, the cost, numerous types of wound dressings have been developed by manufacturers. Considering certain inconveniences related to the intolerance of some patients to antibiotics and the antimicrobial, antioxidant, and curative properties of certain essential oils, we conducted research by incorporating these oils, based on polyvinyl alcohol/ polyvinyl pyrrolidone (PVA/PVP) biopolymers, into dressings. The objective of this study was to study the potential of a polymeric matrix for wound healing, with polyvinyl alcohol as the main material and polyvinyl pyrrolidone and hydroxypropyl methylcellulose (HPMC) as secondary materials, together with additives (plasticizers poly(ethylene glycol) (PEG) and glycerol), stabilizers (Zn stearate), antioxidants (vitamin A and vitamin E), and four types of essential oils (fennel, peppermint, pine, and thyme essential oils). For all the studied samples, the combining compatibility, antimicrobial, and cytotoxicity properties were investigated. The obtained results demonstrated a uniform morphology for almost all the samples and adequate barrier properties for contact with suppurating wounds. The results show that the obtained samples containing essential oils have a good inhibitory effect on, or antimicrobial properties against, Staphylococcus aureus ATCC 25923, Enterococcus faecalis ATCC 29212, Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, and Candida albicans ATCC 10231. The MTT assay showed that the tested samples were not toxic and did not lead to cell death. The results showed that the essential oils used provide an effective solution as active substances in wound dressings.

Effect of the Antimicrobial Agents Peppermint Essential Oil and Silver Nanoparticles on Bone Cement Properties.

The main problems directly linked with the use of PMMA bone cements in orthopedic surgery are the improper mechanical bond between cement and bone and the absence of antimicrobial properties. Recently, more research has been devoted to new bone cement with antimicrobial properties using mainly antibiotics or other innovative materials with antimicrobial properties. In this paper, we developed modified PMMA bone cement with antimicrobial properties proposing some experimental antimicrobial agents consisting of silver nanoparticles incorporated in ceramic glass and hydroxyapatite impregnated with peppermint oil. The impact of the addition of antimicrobial agents on the structure, mechanical properties, and biocompatibility of new PMMA bone cements was quantified. It has been shown that the addition of antimicrobial agents improves the flexural strength of the traditional PMMA bone cement, while the yield strength values show a decrease, most likely because this agent acts as a discontinuity inside the material rather than as a reinforcing agent. In the case of all samples, the addition of antimicrobial agents had no significant influence on the thermal stability. The new PMMA bone cement showed good biocompatibility and the possibility of osteoblast proliferation (MTT test) along with a low level of cytotoxicity (LDH test).

Additives Imparting Antimicrobial Properties to Acrylic Bone Cements.

PMMA bone cements are mainly used to fix implanted prostheses and are introduced as a fluid mixture, which hardens over time. The problem of infected prosthesis could be solved due to the development of some new antibacterial bone cements. In this paper, we show the results obtained to develop four different modified PMMA bone cements by using antimicrobial additives, such as gentamicin, peppermint oil incorporated in hydroxyapatite, and silver nanoparticles incorporated in a ceramic glass matrix (2 and 4%). The structure and morphology of the modified bone cements were investigated by SEM and EDS. We perform experimental measurements on wettability, hydration degree, and degradation degree after immersion in simulated body fluid. The cytotoxicity was evaluated by MTT assay using the human MG-63 cell line. Antimicrobial properties were checked against standard strains Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. The addition of antimicrobial agents did not significantly affect the hydration and degradation degree. In terms of biocompatibility assessed by the MTT test, all experimental PMMA bone cements are biocompatible. The performance of bone cements with peppermint essential oil and silver nanoparticles against these two pathogens suggests that these antibacterial additives look promising to be used in clinical practice against bacterial infection.

Turning Meadow Weeds Into Valuable Species for the Romanian Ethnomedicine While Complying With the Environmentally Friendly Farming Requirements of the European Union's Common Agricultural Policy.

The cross-compliance mechanism of the European Union (EU)'s common agricultural policy (CAP) makes the approval of the direct payments to the European farmers subject to compliance with the requirement to maintain the land in good agricultural and environmental condition. One of the obligations of the Romanian land owners and farmers is to avoid the installation of unwanted vegetation on their land plots. This vegetation is represented by some species of herbaceous or woody plants, annual or perennial, that spontaneously invade the agricultural lands, diminishing the production capacity of the cultivated plants. Included in this category are 10 meadow weeds, without fodder value or even toxic to animals: Arctium lappa L., Carduus nutans L., Conium maculatum L., Eryngium campestre L., Euphorbia cyparissias L., Pteridium aquilinum (L.) Kuhn, Rumex acetosella L., Veratrum album L., Xanthium spinosum L., and Xanthium strumarium L. Various and multiple uses in traditional medicine of these meadow weed species have been reported for Romania and other nine neighboring East European countries, i.e. Bosnia and Herzegovina, Bulgaria, Czech Republic, Estonia, Kosovo, Russia, Turkey, Serbia, and Ukraine. For A. lappa were recorded the highest number of ethnomedicinal uses, in the largest number of East European countries, including Romania. C. maculatum and V. album are not recommended for human consumption but can be further investigated as potential sources of pharmaceutically active compounds. Once removed by landowners and farmers from their land, the raw plant material of these 10 species become readily and easily available to the Romanian local communities and the industry of herbal food supplements, while the biodiversity of the agro-ecosystems is maintained.

Controlling the Degradation Rate of Biodegradable Mg-Zn-Mn Alloys for Orthopedic Applications by Electrophoretic Deposition of Hydroxyapatite Coating.

Magnesium alloys as bioresorbable materials with good biocompatibility have raised a growing interest in the past years in temporary implant manufacturing, as they offer a steady resorption rate and optimal healing in the body. Magnesium exhibits tensile strength properties similar to those of natural bone, which determines its application in load-bearing mechanical medical devices. In this paper, we investigated the biodegradation rate of Mg-Zn-Mn biodegradable alloys (ZMX410 and ZM21) before and after coating them with hydroxyapatite (HAP) via the electrophoretic deposition method. The experimental samples were subjected to corrosion tests to observe the effect of HAP deposition on corrosion resistance and, implicitly, the rate of biodegradation of these in simulated environments. X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) provided detailed information on the quality, structure, and morphology of the HAP coating. The obtained results demonstrate that coating of Mg-Zn-Mn alloys by HAP led to the improvement of corrosion resistance in simulated environments, and that the HAP coating could be used in order to control the biodegradation rate.

Inhibitory Effect of 2R,3R-Dihydromyricetin on Biofilm Formation by Staphylococcus aureus.

The adherence and biofilm formation of Staphylococcus aureus on food contact surfaces are a major concern for the food industry. Development of antibiofilm agents from polyphenols has drawn much attention due to their potent activity. The present study explored the antibacterial and antibiofilm activities of 2R,3R-dihydromyricetin (DMY) against S. aureus ATCC 29213. It was found that DMY exerted excellent antibacterial and bactericidal properties against S. aureus with minimum inhibitory concentration and minimum bactericidal concentration values of 0.125 and 0.25 mg/mL, respectively. Crystal violet staining and 2,3-bis (2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide sodium salt reduction assay demonstrated that DMY significantly reduced the biofilm biomass of S. aureus and decreased the metabolic activity of biofilm cells. Micrographs of light microscope and scanning electron microscope confirmed that DMY inhibited the biofilm formation and caused a disintegration of the complex biofilm architecture. Moreover, DMY was highly efficient in reducing the number of sessile S. aureus cells adhered to stainless steel. These results suggested that DMY could have potential application to control S. aureus contamination in a food processing environment.