First report of Epicoccum latusicollum causing leaf spot on Lophatherum gracile in Jiangsu Province of China.

Lophatherum gracile Brongn. is an important Chinese herbal medicine. Since 2016, a leaf spot disease has appeared on L. gracile seedlings in the traditional Chinese medicine resource garden of the Institute of Botany, Chinese Academy of Sciences, Jiangsu Province (32.06°N, 118.83°E). About approximately 80% of the seedlings suffered from the disease. The disease spot usually starts from the leaf margin, round or irregular, with yellow halo at the edge of the lesion. To isolate the pathogen, four diseased leaves were collected from four different seedlings and there are 6 sections from each diseased leaf. The leaf sections were surface sterilized in 75% alcohol for 30 s and 1.5% NaClO for 90 s, rinsed three times in sterilized distilled water, plated on potato dextrose agar (PDA). Pure cultures were obtained by monosporic isolation. Eleven isolates were obtained (isolate rate of 55%) and identified as Epicoccum sp.. Thus, a representative isolate, DZY3-3 was used for the further study. After 7 days of culture, the colony produced white aerial hyphae, and reddish orange pigment on the underside. The chlamydospores were produced, either multicellular or unicellular. The colony produced pycnidia and conidia after nearly three weeks of cultivation on oatmeal ager OA. Conidia were unicellular, hyaline, oval, and were 4.9 to 6.4 x 2.0 to 3.3 µm (n=35). In addition, a brown discoloration was produced on malt extract agar (MEA) after using the 1 mol/L NaOH solution for 1 h. These characteristics were consistent with the description of Epicoccum sp. (Chen et al. 2017). To comfirm this identification, the internal transcribed spacer (ITS), large subunit ribosomal RNA (LSU), beta-tubulin (TUB) and RNA polymerase II second largest subunit (RPB2) regions were amplified using the detailed primer pairs described by White et al., Rehner and Samuels, Woudenberg et al. and Liu et al., respectively. They had 99.8-100% homology to the ITS (GenBank no. MN215613, 504/505 bp), LSU (MN533800, 809/809 bp), TUB (MN329871, 333/333 bp), and RPB2 (MG787263, 596/596 bp) sequences of E. latusicollum in the GenBank database. A neighbor-joining phylogenetic tree was generated based on the concatenated sequences of all the above regions in MEGA7. The DZY3-3 clustered in the E. latusicollum clade with 100% bootstrap support. Koch's postulates were performed by spray inoculation (1×106 spores/mL) on the left sides of leaves of three healthy L. gracile seedlings and detached leaves, using isolate DZY3-3, while sterilized water served as the control was sprayed on the right sides of leaves. All plants and detached leaves were covered with clear polyethylene bags to maintain about 80% relative humidity at 25℃. Whether in vivo or in vitro pathogenicity test showed similar symptoms to those occurred in the field after 5 days post inoculation. No symptoms occurred on controls. The experiment was repeated three times. Subsequently, the same fungus was reisolated and identified from leaves of three inoculated seedlings. The E. latusicollum has a very wide host range. For example, it has been reported to cause stalk rot on Maize (Xu et al. 2022) and cause leaf spot on Tobacco in China (Guo et al. 2020). To our knowledge, it is the first report of E. latusicollum causing leaf spot on L. gracile in the world. This study will provide an important reference for the biology of E. latusicollum and the distribution of the disease.

Two Novel Sesquiterpenoid Glycosides from the Rhizomes of Atractylodes lancea.

Secoatractylohexone A (1), an unprecedented secoguaiane lactone glycoside featuring 6/7 cores and dihydroxy-9-guaine-3-one 11-O-ß-d-glucopyranoside (2), a 9,10-unsaturated guaiene-type glycoside possessing an uncommon scaffold, were isolated from the water-soluble portion of the ethanolic extract of Atractylodes lancea rhizomes together with five known compounds (3-7). The structures of 1 and 2 were elucidated on the basis of extensive spectroscopic data and application of the CD technique. The potential biological activities of secoatractylohexone A were predicted by network pharmacology in silico, the result of which indicated that secoatractylohexone A may be used to treat type II diabetes.

Microwave Absorption Properties of Carbon Black-Carbonyl Iron/Polylactic Acid Composite Filament for Fused Deposition Modeling.

A single microwave absorbent and simple coating structure cannot meet the increasing requirements for broadband and strong absorption. Three-dimensional printing is an effective way to prepare multi-component complex structure metamaterial absorbers, and the key is to prepare raw materials with excellent absorption properties, suitable for 3D printing. In this paper, CB-CIP/PLA composite filament was prepared via a high-energy mixer and twin-screw extruder by compounding the dielectric loss material carbon black (CB) and the magnetic loss material carbonyl iron powder (CIP) with polylactic acid (PLA) as the matrix. The coaxial ring test piece was printed by FDM technology, and the microstructure of the composites was observed and analyzed by SEM. Meanwhile, the electromagnetic parameters of the composites were examined by a vector network analyzer, mainly studying the influence of the CB and CIP content and thickness on the microwave absorbing properties of the composite material. The results show that when the CB content is 20% and the CIP content is 30%, the CB-CIP/PLA composite has excellent microwave absorption and broad bandwidth. When the matching thickness is 1.6 mm, the minimum reflection loss (RL) reaches −51.10 dB; when the thickness is 1.7 mm, the effective absorption bandwidth (RL < −10 dB) is 5.04 GHz (12.96−18 GHz), nearly covering the whole Ku band. This work provides an efficient formulation and process to prepare an absorbing composite filament for FDM.

Can Electrochemical Sensors Be Used for Identification and Phylogenetic Studies in Lamiaceae?

Electrochemical sensors have shown potential in recent years for plant species identification and phylogenetic studies. These works have been used to investigate the affinities of different species in many genera. However, the ability of electrochemical sensors to study relationships between different genera within a family has not been investigated. In this work, we selected 31 species in the Labiatae and 5 exotaxa as subjects to investigate the feasibility of electrochemical sensors at the genus level. The results show that electrochemical sensors are still very effective for the identification of these plants. Different pattern recognition techniques can make the identification more efficient. Also, the fingerprint profiles collected by the sensors can be used for phylogenetic studies of Labiatae. The phylogram divides all the species into five clusters, where the exotaxa are in one cluster. Species in the Labiatae are mainly distributed in four other clusters. Importantly, the different genera of species all showed close affinities, representing that electrochemical fingerprinting can well distinguish the affinities between the different genera. The results of this work demonstrate the great potential of electrochemical sensors in the study of plant phylogeny. Its application is not limited to the study at the species level, but can be extended to the genus level.

Voltammetric Electrochemical Sensor for Phylogenetic Study in Acer Linn.

Acer Linn. is a highly divergent species morphology in the maple family (Aceraceae). It is one of the genera facing a very difficult taxonomic situation. The phylogeny of the genus and the taxonomic system under the genus remain unclear. The use of electrochemical fingerprints for plant phylogenetic study is an emerging application in biosensors. In this work, leaves of 18 species of Acer Linn. with an exo-taxa were selected for electrochemical fingerprint recording. Two different conditions were used for improving the data abundance. The fingerprint of all species showed a series of oxidation peaks. These peaks can be ascribed to the oxidation of flavonols, phenolic acids, procyanidins, alkaloids, and pigments in plant tissue. These electrochemical fingerprints can be used for the identification of plant species. We also performed a phylogenetic study with data from electrochemical fingerprinting. The phylogenetic tree of Acer is divided into three main clades. The result is in full agreement with A. shangszeense var. anfuense, A. pictum subsp. mono, A. amplum, A. truncatum, and A. miaotaiense, belonging to the subsection Platanoidea. A. nikoense and A. griseum were clustered together in the dendrogram. Another group that fits the traditional classification results is in the subsection Integrifolia.

[Curve analysis and geometric measurement of root canal curvatures].

PURPOSE: To study the anatomical features of curved root canals. METHODS: According to Nagy's classification,the root canals were divided into 4 types:type I (straight), type C (continuously curved), type J (apically curved) and type S (multicurved). Each type had a sample selected from extracted permanent teeth. Digital radiographs were taken at buccolingual and mesiodistal directions with a K-file inserted into the root canal. The images were treated by Photoshop7.0 and CorelTRACE10 softwares, after that a CAD/CAM software UG NX V1.0 was applied to extract the 2D curves of the root canal axis from the images,then the 3D curves of the root canal axis were built up accordingly. The curvature of the curves was analysed and the geometric parameters were measured by UG. RESULTS: The curvature values of type I root canal were very low; the curvature of type C root canal reached a peak on the middle part,it decreased slowly towards the two ends; type J root canal had a curvature peak near the root apex, and the middle 1/3 and neck 1/3 parts of the root canal were "curvature flat zones". Type S root canal had a curvature inflection,and beside it were 2 curvature peaks at opposite directions. The geometric parameter values of the same root canal's 2D and 3D axis were different. CONCLUSION: Each point on the root canal axis had a curvature value and a vector of tangent, different root canal forms had different rules of curvature distribution, just 1 or 2 parameters couldn't describe a curved root canal completely.