Biomechanical study of anterior transpedicular root screw intervertebral fusion system of lower cervical spine: a finite element analysis.

Background: The cervical anterior transpedicular screw (ATPS) fixation technology can provide adequate stability for cervical three-column injuries. However, its high risk of screw insertion and technical complexity have restricted its widespread clinical application. As an improvement over the ATPS technology, the cervical anterior transpedicular root screw (ATPRS) technology has been introduced to reduce the risk associated with screw insertion. This study aims to use finite element analysis (FEA) to investigate the biomechanical characteristics of a cervical spine model after using the novel ATPRS intervertebral fusion system, providing insights into its application and potential refinement. Methods: A finite element (FE) model of the C3-C7 lower cervical spine was established and validated. After two-level (C4-C6) anterior cervical discectomy and fusion (ACDF) surgery, FE models were constructed for the anterior cervical locked-plate (ACLP) internal fixation, the ATPS internal fixation, and the novel ATPRS intervertebral fusion system. These models were subjected to 75N axial force and 1.0 Nm to induce various movements. The range of motion (ROM) of the surgical segments (C4-C6), maximum stress on the internal fixation systems, and maximum stress on the adjacent intervertebral discs were tested and recorded. Results: All three internal fixation methods effectively reduced the ROM of the surgical segments. The ATPRS model demonstrated the smallest ROM during flexion, extension, and rotation, but a slightly larger ROM during lateral bending. Additionally, the maximum bone-screw interface stresses for the ATPRS model during flexion, extension, lateral bending, and axial rotation were 32.69, 64.24, 44.07, 35.89 MPa, which were lower than those of the ACLP and ATPS models. Similarly, the maximum stresses on the adjacent intervertebral discs in the ATPRS model during flexion, extension, lateral bending, and axial rotation consistently remained lower than those in the ACLP and ATPS models. However, the maximum stresses on the cage and the upper endplate of the ATPRS model were generally higher. Conclusion: Although the novel ATPRS intervertebral fusion system generally had greater endplate stress than ACLP and ATPS, it can better stabilize cervical three-column injuries and might reduce the occurrence of adjacent segment degeneration (ASD). Furthermore, further studies and improvements are necessary for the ATPRS intervertebral fusion system.

[Feasibility of a novel type of complex anterior cervical fixation by using Mimics software].

OBJECTIVE: To investigate the feasibility of mimics software in analyzing a new type of complex anterior cervical fixation -- anterior transpedicular screw fixation+zero notch internal fixation. METHODS: From January 2021 to September 2022, 50 normal pedestrians who underwent cervical spine CT scanning were selected for C1-C7 segment scanning, including 27 males and 23 females, aged from 25 to 65 years old with an average of (46.0 ± 9.0) years old. The dicom format is exported and engraved into the CD, and use the mimics software to perform 3D reconstruction of each segment. A simulated screw is placed on the image according to the critical value of zero notch screw (head and tail angle 44°, internal angle 29°). The position of zero notch screw in each segment is observed to determine the feasibility of anterior transpedicular screw fixation plus zero notch internal fixation. RESULTS: For the upper zero notch screws the three-dimensional images of the cervical spine across all 50 subjects within the C3-C7 segments demonstrated safe position, with no instances of intersection with ATPS. For the lower zero notch screw, in C3-C4 and C4-C5, 4 out of 50 subjects are in the safe position in the three-dimensional images of cervical vertebrae, and 46 cases could achieve secure screw placement when the maximum caudal angle is(32.3±1.9) ° and (36.1±2.2) °, respectively. In C5-C6 and C6-C7 segments, no lower zero notch screws intersected with ATPS, and all screws are in safe positions. CONCLUSION: Lower cervical anterior pedicle screw fixation plus zero notch internal fixation can achieve successful nail placement through the selected entry point and position.

Measurement of anatomical parameters of anterior transpedicular root screw intervertebral fusion system of cervical spine.

OBJECTIVE: This study aims to investigate the feasibility of the anterior transpedicular root screw (ATPRS) intervertebral fusion system for the cervical spine and provide a basis for the design of the ATPRS intervertebral fusion system. METHODS: A total of 60 healthy adult cervical spine CT images examined from our hospital were selected, including 30 males and 30 females, with an average age of 39.6 ± 4.8 years. The image data was imported into Mimics 21.0 software in DICOM format for 3D model reconstruction. Simulated screw insertion was performed on both sides of the midline of the intervertebral space. The entry point (P1) was determined when the upper and lower screw paths did not overlap. When the screw was tangent to the medial edge of the Luschka joint, the insertion point was determined as the entry point (P2). Measurements were taken and recorded for the following parameters: distance from the screw entry point to the midline of the intervertebral space (DPM), the simulated screw length, inclination angle, cranial/caudal tilted angle, the anterior-posterior (AP) and mediolateral (ML) diameters of the cervical intervertebral space, the heights of the anterior, middle, and posterior edges of the cervical intervertebral space, and the curvature diameter of the lower end plate of the cervical vertebral body. Statistical analysis was performed on the measurement results. RESULTS: The screw entry area (P1P2) showed an increasing trend from C3-C7 in both male (2.92-6.08 mm) and female (2.32-5.12 mm) groups. There were statistical differences between men and women at the same level (P < 0.05). The average screw length of men and women was greater than 20 mm, and the upper and lower screw lengths showed an increasing trend from C3 to C7. In the area where screws could be inserted, the range of screw inclination was as follows: male group upper screw (47.73-66.76°), lower screw (48.05-65.35°); female group upper screw (49.15-65.66°) and lower screw (49.42-63.29°); The range of cranial/caudal tilted angle of the screw was as follows: male group upper screw (32.06-39.56°), lower screw (29.12-36.95°); female group upper screw (30.97-38.92°) and lower screw (27.29-37.20°). The anterior-posterior diameter and mediolateral diameter of the cervical intervertebral space showed an increasing trend from C3 to C7 in both male and female groups. The middle height (MH) of the cervical intervertebral space was greater than the anterior edge height (AH) and posterior edge height (PD), with statistical differences (P < 0.05). CONCLUSIONS: Through the study of CT images of the cervical spine, it was determined that the ATPRS intervertebral fusion system has a feasible area for screw insertion in the cervical intervertebral space.

Clinical Outcomes of Open-Door Laminoplasty Combined with Bilateral Lateral Mass Screw Fixation for Multi-Level Cervical Spinal Stenosis with Traumatic Cervical Instability and Spinal Cord Injury: A Retrospective Study.

OBJECTIVES: The prevalence of multi-level cervical spinal stenosis complicated with traumatic cervical instability and spinal cord injury (MCSS-TCISCI) is low, and the optimal surgical approach remains unclear. Open-door laminoplasty combined with bilateral lateral mass screw fixation (ODL-BLMSF) is a relatively new surgical technique; however, its clinical effectiveness in managing MCSS-TCISCI has not been well-established. This study aims to assess the clinical value of ODL-BLMSF against MCSS-TCISCI. METHODS: We retrospectively analyzed 20 cases of MCSS-TCISCI treated with ODL-BLMSF from July 2016 to June 2020. Radiographic alterations of all included patients were measured using plain radiographs, CT scans, and MRI scans. Cervical lordosis was evaluated using C2-C7 Cobb angle and cervical curvature index (CCI) on lateral radiographs, and Pavlov ratio at the C5 level. Neurological functional recovery was assessed using Japanese Orthopaedic Association (JOA) scores and Nurick grade, while neck and axial symptoms were assessed using the neck disability index (NDI) and the visual analog scale (VAS). The paired t-test was utilized for statistical analysis. RESULTS: All included patients were followed up for an average period of 26.5 months (range: 24-30 months) after ODL-BLMSF. The average Pavlov ratio at the C5 level significantly improved from 0.57 ± 0.1 preoperatively to 1.13 ± 0.1 and 1.12 ± 0.04 at 6 months postoperatively and at the last follow-up (t = 16.347, 16.536, p < 0.001). Importantly, this approach significantly increased the JOA score from 5.0 ± 2.6 before surgery to 11.65 ± 4.3 and 12.1 ± 4.3 at 6 months postoperatively and at the last follow-up (t = 9.6, -9.600, p < 0.001), with an average JOA recovery rate of 59.1%; and the average Nurick disability score decreased from 3.0 ± 1.3 (preoperative) to 1.65 ± 1.22 and 1.5 ± 1.2 (6 months postoperatively and at last follow-up) (t = 5.111, 1.831, p < 0.001). Meanwhile, the NDI score decreased from 30.3 ± 4.3 preoperatively to 13.2 ± 9.2 at 6 months (t = 12.305, p < 0.001), and to 12.45 ± 8.6 at the final follow-up (t = 13.968, p < 0.001), while the VAS score decreased from 4.0 ± 1.5 preoperatively to 1.5 ± 0.7 at 6 months (t = 9.575, p < 0.001), and to 1.15 ± 0.7 at the final follow-up (t = 10.356, p < 0.001). CONCLUSION: ODL-BLMSF can effectively dilate the stenotic spinal canal to decompress the spinal cord, maintain good cervical alignment and stability, and improve the recovery of neurological function and neck function. This technique is suitable for treating selected cases of MCSS-TCISCI.

Anatomical and Imaging Study on the Optimum Entry Point and Trajectory for Anterior Transpedicular Root Screw Placement into the Lower Cervical Spine.

Objective: To study the optimum entry point and trajectory for anterior transpedicular root screw (ATPRS) placement into the lower cervical spine (LCS), so as to provide a basis for clinical application. Methods: A retrospective analysis of cervical CT images of patients who underwent cervical CT examination in the Spinal Surgery of Ningbo No. 6 Hospital from January 2020 to August 2021 was conducted. The data were obtained and modeled. On the coronal plane, the vertebral body (VB) between the anterior midline of cervical vertebral segments C3-7 and the left P line (by drawing the line parallel to the anterior midline of the VB at the intersection of the anterior edge of the Luschka's joint and the upper endplate) was equally divided into 9 zones (a-i). The ideal entry point and path of cervical ATPRS were designed and recorded. Additionally, 7 cadaveric specimens were selected, and the screw placement parameters were regenerated according to the above methods for screw placement. Results: Zone i of each segment, with the longest screw length, was the best area for screw placement. In all patients, the horizontal angles of vertebrae C3-7 in zones a, d, and g, zones b, e, and h, and zones c, f, and i showed a gradually decreasing trend. The sagittal angle range of C3-7 in all patients showed a gradually increasing trend in zones a-c, d-f, and g-i. The distance from the anterior midline of C3-7 to the P line increased in all patients, and the distance was longer in males than in females, with statistical significance. Pedicle screws were successfully inserted in all the 7 cadaveric specimens. Conclusions: ATPRS placement can be used for LCS internal fixation, and the precise screw placement parameters can be simulated by the software, which provides theoretical basis for its future clinical application.

Biomechanical analysis of atlantoaxial intraarticular fusion cages with posterior pedicle screws fixation using finite element method.

BACKGROUND: Cadaveric biomechanical studies indicated that atlantoaxial intraarticular fusion cages with posterior pedicle screws fixation could increase the multi-axial rigidity. However, the stress distribution of the fixation construct is still unclear. METHODS: From computed tomography images, a nonlinear intact three-dimensional C0-2 finite element model was developed and validated. Four finite element models were reconstructed: intact model, unstable model, bilateral atlantoaxial pedicle screws combined bilateral cages model, bilateral atlantoaxial pedicle screws model. The range of motion and maximum von Mises stresses were compared under flexion, extension, lateral bending, and axial rotation. FINDINGS: Compared with unstable model, both bilateral atlantoaxial pedicle screws combined bilateral cages model and bilateral atlantoaxial pedicle screws model fixation techniques reduced range of motion by >99% in extension, flexion, lateral bending and axial rotation. For bilateral atlantoaxial pedicle screws combined bilateral cages model, the maximum von Mises stress was in the base of the C2 screw head site. In the bilateral atlantoaxial pedicle screws model was stressed at the rod linked C1 and C2 screws. Compared with bilateral atlantoaxial pedicle screws model, bilateral atlantoaxial pedicle screws combined bilateral cages model reduced the maximum von Mises stress on the implants by >90% in extension, flexion, lateral bending and axial rotation. INTERPRETATION: The finite element model study indicated that, compared with posterior C1-C2 pedicle screws fixation, atlantoaxial intraarticular fusion cages with posterior pedicle screws fixation could not only significantly restore stability to the atlantoaxial junction, but also dramatically reduce the maximum von Mises stress in the C1-C2 pedicle screws.

[Minimally invasive direct lateral approach debridement, interbody bone grafting, and interbody fusion combined with posterior percutaneous pedicle screw fixation for lumbar spinal tuberculosis].

OBJECTIVE: To investigate the clinical efficacy and superiority of direct lateral interbody fusion combined with posterior percutaneous screw fixation in the treatment of lumbar tuberculosis. METHODS: From June 2013 to August 2016, the clinical data of 83 patients with lumbar tuberculosis were retrospectively analyzed, including 55 males and 28 females, aged from 27 to 72 (49.5±13.5) years. These 83 patients were divided into two groups according to different operation methods, 35 cases in group A were treated with direct lateral interbody fusion combined with posterior percutaneous screw fixation;48 cases in group B were treated with anterior traditional extraperitoneal debridement combined with posterior internal fixation. After operation, regular quadruple antituberculosis drugs were continued for 18 months. The operation time, intraoperative blood loss, hospital stay, bone graft fusion time and complications were compared between the two groups. Visual analogue score (VAS) of lumbar pain, Oswestry Disability Index (ODI), sagittal Cobb angle, erythrocyte sedimentation rate (ESR) and C-reactive protein(CRP) values before and after operation were analyzed. RESULTS: The operation was successfully completed in both groups, and the operation mode was not changed during operation. The operation time, intraoperative blood loss and hospital stay were (149.4±13.3) min, (354.3±69.0) ml, (9.4±1.6) d in group A and(116.8±10.0) min, (721.9±172.3) ml, (11.8±1.7) d in group B, respectively, with significant difference between the two groups (P<0.05). The follow up time was (24.2±5.1) months in group A and (24.0±5.0) months in group B, there was no significant difference between two groups (P>0.05). At the follow-up of 4 months after operation, one patient in group A was found to have enlarged psoas major abscess on the contralateral side, and was cured after secondary operation. No sinus formation, cerebrospinal fluid leakage, internal fixation loosening, fracture or distal junction kyphosis were found during follow-up. The fusion time was (5.1±1.6) months in group A and (5.1± 1.7) months in group B, there was no significant difference between two groups (P>0.05). The VAS, ODI score, sagittal Cobb angle, ESR and CRP value of the lesion segment at the last follow-up of the two groups were significantly improved (P<0.05), but there was no significant difference between two groups (P>0.05). CONCLUSION: The two kinds of operation can obtain satisfactory clinical effect. Direct lateral interbody fusion combined with posterior percutaneous screw fixation can reduce intraoperative blood loss and hospital stay, which is conducive to early rehabilitation of patients.

Effectiveness of 2 Types of Drill Templates for Cervical Anterior Transpedicular Screw Placements: A Comparative Study.

OBJECTIVE: To evaluate effectiveness of regular and modified drill templates used to guide cervical anterior transpedicular screw (ATPS) placement. METHODS: This study included 15 adult cadaveric specimens. Computed tomography images were imported into Mimics software. Three-dimensional modeling of all cervical vertebrae was done, and the ideal trajectories were designed for ATPSs. Models of regular and modified templates were designed for every level on the left or right side randomly. After three-dimensional printing, 2 types of templates were used to guide the insertion. Postoperative computed tomography scans were used to measure deviations between real and ideal trajectories in the direction and positioning of entry points. The deviations in the 2 groups were compared using paired t test. RESULTS: There were 120 templates and ATPSs fabricated and placed. Postoperative images showed that 7 screws perforated pedicles in the regular group, with an accuracy rate of 88.3%. Deviations between real and ideal trajectories in cranially inclined angles and extroversive angles were 1.13° ± 0.61° and 0.97° ± 0.60°, respectively, and deviations of entry point position in the x-axis and y-axis were 0.72 ± 0.38 mm and 0.95 ± 0.47 mm, respectively. In the modified group, there were 2 malposition screws with accuracy rate of 96.7%. Deviations in cranially inclined angles were 0.66° ± 0.53° and 0.66° ± 0.55° in extroversive angles, respectively, and deviations in entry point positions in the x-axis and y-axis were 0.45 ± 0.37 mm and 0.51 ± 0.34 mm, respectively. The differences in deviations between groups were statistically significant. CONCLUSIONS: Compared with regular drill templates, modified drill templates can provide higher accuracy and stronger trajectory control in ATPS insertions.

[Effect of posterior osteotomy on the sagittal parameters of the spinopelvis in patients with lumbar degenerative kyphosis].

OBJECTIVE: To investigate the influence of posterior osteotomy on spinopelvic parameters in lumbar degenerative kyphosis (LDK) patients. METHODS: The clinical data of 21 patients with lumbar degenerative kyphosis who underwent osteotomy from January 2012 to December 2015 were retrospectively analyzed. There were 5 males and 16 females, aged from 55 to 76 years with an average of (66.24±5.13) years. All patients had taken preoperative and postoperative full length spinal X-ray, analyzing the spinopelvic parameters as thoracic kyphosis (TK), lumbar lordosis (LL), sagittal vertical axis (SVA), pelvic incidence (PI), pelvic tilt (PT) and sacral slope (SS). RESULTS: All operations were successful, the average operative time was 190 min (160 to 220 min) and intraoperative blood loss was 1 000 ml (800 to 1900 ml). Parameters of the patients between preoperative and period 1-year follow-up were as follows : preoperative TK increased from (31.67±21.13) ° to (34.67±11.60) °, LL corrected from (4.76±3.17) ° to (37.41±6.28) °, PT reduced from (33.94±5.01) ° to (20.12±5.36) °, and SS improved from (18.47±2.60) ° to (31.71±4.30) °, SVA restored from (13.24±3.60) cm to (2.82±1.33) cm. There were significant differences of spinopelvic parameters between preoperation and postoperation (P<0.05). CONCLUSION: Posterior osteotomy can effectively reconstruct the sagittal balance of spinopelvis in patients with lumbar degenerative kyphosis. The recovery of lumbar lordosis and sacral slope is closely related to the reconstruction of sagittal balance.

A Deep Supervised Learning Framework for Data-Driven Soft Sensor Modeling of Industrial Processes.

Deep learning has been recently introduced for soft sensors in industrial processes. However, most of the existing deep networks, such as stacked autoencoder, are pretrained in a layerwise unsupervised way to learn feature representations for the raw input data itself. For soft sensors, it is necessary to extract quality-relevant features for quality prediction. Thus, a deep layerwise supervised pretraining framework is proposed for quality-relevant feature extraction and soft sensor modeling in this article, which is based on stacked supervised encoder-decoder (SSED). In SSED, hierarchical quality-relevant features are successively learned by a number of supervised encoder-decoder (SED) models. For each SED, the features from the previous hidden layer are served as new inputs to generate the high-level features that are learned with the constraint of predicting the quality data as good as possible at the output layer of this SED. With this new structure, the SED can learn quality-relevant features that can largely improve the prediction performance. By stacking multiple SEDs, hierarchical quality-relevant features can be progressively learned, and irrelevant information is gradually reduced by deep SSED network. The effectiveness of the proposed model is demonstrated on a numerical example and an industrial process of the debutanizer column.

[Efficacy of bilateral sagittal cross percutaneous kyphoplasty for preventing recurrent fracture of the cemented vertebrae].

OBJECTIVE: To explore the efficacy of bilateral sagittal cross percutaneous kyphoplasty(PKP) for preventing recurrent fracture of the cemented vertebrae. METHODS: From January 2017 to June 2017, 85 patients with single-segment osteoporotic vertebral compression fractures(OVCFs) were treated by bilateral sagittal cross PKP(cross group). There were 35 males and 50 females with an average age of (70.1±8.3) years old in cross group. Another 85 patients with single-segment OVCFs were treated by traditional PKP (traditional group). There were 37 males and 48 females with an average age of (73.3±9.5) years old in traditional group. The cement distribution condition, recurrent fracture of the cemented vertebrae, the anterior vertebral body height and sagittal Cobb angle, visual analogue scale(VAS) were observed in two groups. RESULTS: All patients underwent operation successfully. The follow-up time were (11.8±4.5) months in cross group and (12.1±3.7) months in traditional group. In cross group, all patients' bone cement touched the upper and lower endplates of the vertebral body while 67 cases (78.8%) in traditional group did with significant difference between two groups (P<0.05). No patient in cross group suffered recurrent fracture of the cemented vertebrae while 10 cases (11.8%) in traditional group did with significant difference between two groups(P<0.05). The anterior vertebral body height, sagittal Cobb angle and VAS in both groups were obvious improved at 2 days after operation (P<0.05) and there were no significant difference between two groups at 2 days after operation and the final follow-up(P>0.05). CONCLUSIONS: Bilateral sagittal cross PKP was a simple, safe and effective technique which can make bone cement distribute in the fractured vertebral body and contact the upper and lower endplates of the vertebral body, thus preventing the recurrent fracture of the cemented vertebrae.

[Digital modeling and analysis of the applicability of backward rotation method in lumbar kyphoplasty with unilateral puncture].

OBJECTIVE: The 3D model of lumbar spine was established by using Mimics software. To observe the applicability and needling parameters of lumbar vertebral kyphoplasty with unilateral puncture by backward rotation method using simulated puncture. METHODS: Twenty-four patients (12 males and 12 females) with osteoporotic thoracic fracture in the first time and no signs of lumbar misalignment and bone destruction were scanned by spiral CT on the lumbar spine. The original DICOM file was modeled in 3D with Mimics software, and the vertebral bodies were separated. After being imported into 3-matic software, the posterior wall of the vertebral body was restrained for standardized measurement. A sketch perpendicular to the mid-section of the pedicle and the posterior wall of the vertebral body was drawn. The simulated puncture was performed on the sketch. The angle and distance parameters of the range of motion of the puncture needle were recorded, and the puncture needle was recorded at the top. The crossing points of the anterior, middle and posterior zones of the tangential line of the vertebral body were located at the high extraversion angle, and the results were compared and analyzed. RESULTS: All the data in the left and right sides had no significantly differences(P>0.05). Data of different segments in different gender were significantly differences(P<0.05). The maximal extraversion angle in lumbar spine increased gradually from (33.41±1.31) degree to (56.53±4.71) degree in males, as same as in females from(28.58±2.55) to (53.86±2.68) degree. There was no crossing point in area A, 3.3% of males and 26.67% of females in area B, rest in area C. The distribution areas on gender showed statistically significance (P<0.05). CONCLUSIONS: Backward rotation method can theoretically meet the requirements of puncture point for vertebral compression fracture, especially for males and lower lumbar spine. The determination of the maximum inclination angle is of guiding significance to the backward rotation method.

[French door segmented laminectomy decompression for severe cervical ossification of posterior longitudinal ligament complicated with spinal cord injury].

OBJECTIVE: To evaluate the clinical effects of French door segmented laminectomy decompression for severe cervical OPLL complicated with spinal cord injury. METHODS: The clinical data of 38 patients with serious cervical OPLL complicated with spinal cord injury were retrospectively analyzed and these patients were treated with French door segmented laminectomy decompression and internal fixation from June 2012 to June 2014. There were 25 males and 13 females, aged from 42 to 78 years with an average of 58.2 years. Of them, 35 cases suffered from aggravating neurological symptoms with a definite precipitating factor. Spinal cord injury was related to minor injury of the neck, such as hyperextension of the neck in 3 cases. Preoperative Japanese Orthopaedic Score (JOA) was 8.1±1.7 and Neck Disability Index (NDI) was 19.8±4.4. Preoperative CT scans showed the range of OPLL was more than three segments. The spinal canal was occupied 50% to 85% with an average of 70.7%. RESULTS: All the patients were followed up for 10 to 24 months with an average of 15.6 months. The operative time was 90 to 150 min with an average of 120 min and blood loss was 300 to 800 ml with an average of (480±80) ml. At final follow-up, NDI and JOA were 7.5±2.5 and 13.5±2.0, respectively, and they were obviously improved compared with preoperation. Preoperative cervical Cobb angle was (8.10±2.70)° and at final follow-up was (15.60±1.80)°, and there was significant difference between preoperative and postoperative (P<0.05). Deep infection occurred in 1 case, epidural hematoma in 1 case, C5 nerve root palsy in 3 cases, and axial symptom in 8 cases after operation. No serious complications, such as vertebral artery injury, cerebrospinal fluid leakage, deterioration of neurological dysfunction, or internal fixation failure was found. CONCLUSIONS: French door segmented laminectomy decompression is safe and feasible for severe cervical OPLL complicated with spinal cord injury, and it is worth to be popularized in future.

An RCT study on the feasibility of anterior transpedicular screw fixation in the cervicothoracic junction.

STUDY DESIGN: We evaluated the trajectory and the entry points of anterior transpedicular screws (ATPS) in the cervicothoracic junction (CTJ). OBJECTIVE: This study aimed at investigating the feasibility of ATPS fixation in the CTJ. Application of an ATPS in the lower cervical spine has been reported; however, there were no reports exploring the feasibility of anterior transpedicular screw fixation in the CTJ. METHODS: CT scans were performed in 50 cases and multiplanar reformation was used to measure the related parameters on pedicle axis view at C6-T2. Transverse pedicle angle, outer pedicle width, pedicle axis length, distance transverse intersection point (DtIP), sagittal pedicle angle, anterior vertebral body height, outer pedicle height, and distance sagittal intersection point (DsIP) were measured. The prozone of CTJ was divided into three different regions, which were named as the "manubrium region", the region "above" and "below" the manubrium. The distribution of the trajectory of sagittal pedicle axes was recorded in the three regions and the related data were statistically analyzed. RESULTS: There was no statistical difference in gender (P > 0.05). The transverse pedicle angle decreased from C6 (46.77° ± 2.72°) to T2 (20.62° ± 5.04°). DtIP increased from C6 to T2. DsIP was an average of 7.17 mm. The sagittal pedicle axis lines of the C6 and C7 were located in the region above the manubrium. T1 was mainly in the manubrium region followed by the region above the manubrium. T2 was mainly located in the manubrium region followed by the region below the manubrium. CONCLUSION: Implantation of ATPS at C6, C7, and some T1 is feasible through the low anterior cervical approach, while it is almost impossible to approach T2 that way.

Anterior transpedicular screws in conjunction with plate fixation and fusion for the treatment of subaxial cervical spine diseases.

OBJECTIVE: This study aimed at exploring the clinical application of anterior transpedicular screw (ATPS) and plate in the reconstruction of subaxial cervical spine. METHODS: 8 cases were reconstructed by ATPS and plate in the subaxial cervical spine from Jan 2009 to Dec 2011. X-rays and computed tomography images were collected to evaluate the position of ATPS. Magnetic resonance imaging was also included to evaluate the result of decompression, the existence of epidural hematoma and the morphology of the cervical spinal cord. Japanese Orthopaedic Association scores were observed before and after operation as a functional estimation. RESULTS: All of the eight cases were followed up from 3 to 36 months with the average of 15.5 months. A total of 16 ATPS were implanted in the subaxial cervical spine in the eight patients. All the screws were inserted smoothly. Bone fusion was found in all the subjects 4.5 months after operation on average. No loosening or breakage of the internal fixation was observed in our study. Hoarseness was observed in one case due to distraction injury of the recurrent laryngeal nerve, which disappeared after 3 weeks' conservative treatment. Dysphagia was complained by two patients after surgery, which was alleviated 3 months later. There were four screws deviating less than 1 mm (Grade 1), two medially and two laterally. All the anterior compressions were removed completely in this group. Only a small amount of epidural hematoma was found in four cases on MRI images before discharge. The average JOA scores were significantly improved from 5.6 ± 1.4 before surgery to 14.5 ± 0.8 at discharge (P < 0.01), which decreased to 13.2 ± 1.2 at 3 months after operation, but improved again to 15.2 ± 0.8 at 1 year after operation. CONCLUSION: Although there are some complications, ATPS with plate is an effective and safe technique for anterior reconstruction in the subaxial cervical spine. Only those spine centers with sufficient experience in complex cervical spine reconstruction surgery can conduct this technique according to strict indications.

Two new triterpenoid saponins obtained by microbial hydrolysis with Alternaria alternata AS 3.6872.

Compound 1, a triterpenoid saponin from Ardisia gigantifolia Stapf showing potential anti-tumour activity, was hydrolysed into two deglycosyl derivatives (2 and 3) by Alternaria alternata AS 3.6872. Both these derivatives are new compounds. Their structures were elucidated on the basis of 1D, 2D NMR, HR-ESI-MS and optical rotation spectral data. Compounds 1-3 were evaluated for their cytotoxicity against human hepatocellular carcinoma and normal liver cells by Cell Counting Kit 8 colorimetric assay.

Biotransformation on the triterpenoid saponin of Ardisia gigantifolia by Aspergillus avenaceus AS 3.4454.

Compound 1, a triterpenoid saponin from Ardisia gigantifolia Stapf. showing potential anti-tumor activity, was transformed into three derivatives (2-4) by Aspergillus avenaceus 3.4454. Among them, compounds 2 and 3 are new compounds. Their structures were elucidated on the basis of 1D NMR, 2D NMR, HR-ESI-MS, and optical rotation data. Compounds 1-3 were evaluated for their cytotoxicity against human hepatocellular carcinoma and normal liver cells by cell counting kit 8 colorimetric assay. Compound 3 displayed better cytotoxicity against Bel-7402 and HepG2 cell lines and much weaker cytotoxicity against normal liver L02 cell than that of positive control (epirubicin hydrochloride).

[Treatment of flexion-distraction thoracolumbar fractures by postural reduction with instrumental reduction].

OBJECTIVE: To study the curative effect of postural reduction with instrumental reduction in treatment of flexion-distraction thoracolumbar fractures. METHODS: A retrospective study was performed on 43 patients with single thoracolumbar flexion-distraction fractures admitted from August 2009 to August 2011, included 28 males and 15 females with an average age of 44 years old (34 to 56 years old). All patients were treated with postural reduction with instrumental reduction. The kyphosis (Cobb angle) recovery of injured vertebral height and complication were analyzed. The visual analogue scale(VAS) and com-plications were followed up and recorded. RESULTS: There was no difference in recovery of injured vertebral posterior height among preoperative, 1 week and 1 year after operation (P > 0.05). There were significantly difference in kyphosis (Cobb angle) and recovery of injured vertebral anterior height between preoperative and postoperative at 1 week (P < 0.05). There was no difference in kyphosis (Cobb angle) and recovery of injured vertebral anterior height between 1 week and 1 year after operation (P > 0.05). VAS significantly improved from preoperative (7.2 +/- 1.2) to (0.8 +/- 0.7) at 1 year after operation (t = 18.47, P < 0.001). CONCLUSION: Postural reduction with instrumental reduction is effective for thoracolumbar flexion-distraction fractures and it is beneficial to the recovery of vertebral height and saggital alignment.

Function-preserving reduction and fixation of unstable Jefferson fractures using a C1 posterior limited construct.

STUDY DESIGN: This is a retrospective, clinical, and radiologic study of posterior reduction and fusion of the C1 arch in the treatment of unstable Jefferson fractures. OBJECTIVE: The aim of the study was to describe a new motion-preserving surgical technique in the treatment of unstable Jefferson fracture. SUMMARY OF BACKGROUND DATA: The management of unstable Jefferson fractures remains controversial. The majority of C1 fractures can be effectively treated nonoperatively with external immobilization unless there is an injury to the transverse atlantal ligament (TAL). Conservative treatment usually involves immobilization for a long time in Halo vest, whereas surgical intervention generally involves C1-C2 fusion, eliminating the range of motion of the upper cervical spine. We propose a novel method for the treatment of unstable Jefferson fractures without restricting the range of motion. METHODS: A retrospective review of 12 patients with unstable C1 fractures between April 2008 and October 2011 was performed. They were treated by inserting bilateral posterior C1 pedicle screws or lateral mass screws interconnected by a transversal rod to achieve internal fixation. There were 8 men and 4 women, with an average age of 35.6 years (range, 20-60 y). Presenting symptoms included neck pain, stiffness, and decreased range of motion but none had neurological injury. Seven patients had bilateral posterior arch fractures associated with unilateral anterior arch fractures (posterior 3/4 Jefferson fracture, Landells type II), and 5 had unilateral anterior and posterior arch fractures (half-ring Jefferson fracture, Landells type II). Seven patients had intact TAL, and 5 patients had fractures and avulsion of the attachment of TAL (Dickman type II). RESULTS: A total of 24 screws were inserted. Five cases had screws placed in the lateral mass: 3 because of posterior arch breakage, and 2 because the height of the posterior arch at the entry point was <4 mm. The remaining 7 cases had pedicle screw fixation. One patient had venous plexus injury during exposure of lower margin of the posterior arch; however, successful hemostasis was achieved with Gelfoam. Postoperative x-ray and computed tomography scan showed partial breach of the transverse foramen caused by a screw in 1 case, and breach of the inner cortex of the pedicle caused by screw displacement in 1 case; however, no spinal cord injury or vertebral artery injury was found. The remaining screws were in good position. Patients were followed up for 6-40 months (average, 22 mo). All cases had recovery of range of motion of the cervical spine to the preinjury level by 3-6 months after surgery, with resolution of pain. At 6 months follow-up, plain radiographs and computed tomography scans revealed satisfactory cervical alignment, no implant failure, and satisfactory bony fusion of the fractures; no C1-C2 instability was observed on the flexion-extension radiographs. CONCLUSIONS: C1 posterior limited construct is a valid technique and a feasible method for treating unstable Jefferson fractures, which allows preservation of the function of the craniocervical junction, without significant morbidity.