The mechano-chemical circuit drives skin organoid self-organization.

Stem cells in organoids self-organize into tissue patterns with unknown mechanisms. Here, we use skin organoids to analyze this process. Cell behavior videos show that the morphological transformation from multiple spheroidal units with morphogenesis competence (CMU) to planar skin is characterized by two abrupt cell motility-increasing events before calming down. The self-organizing processes are controlled by a morphogenetic module composed of molecular sensors, modulators, and executers. Increasing dermal stiffness provides the initial driving force (driver) which activates Yap1 (sensor) in epidermal cysts. Notch signaling (modulator 1) in epidermal cyst tunes the threshold of Yap1 activation. Activated Yap1 induces Wnts and MMPs (epidermal executers) in basal cells to facilitate cellular flows, allowing epidermal cells to protrude out from the CMU. Dermal cell-expressed Rock (dermal executer) generates a stiff force bridge between two CMU and accelerates tissue mixing via activating Laminin and ß1-integrin. Thus, this self-organizing coalescence process is controlled by a mechano-chemical circuit. Beyond skin, self-organization in organoids may use similar mechano-chemical circuit structures.

A Skin-Inspired Multifunctional Conductive Hydrogel with High Stretchable, Adhesive, Healable, and Decomposable Properties for Highly Sensitive Dual-Sensing of Temperature and Strain.

Developing smart hydrogels with excellent physicochemical properties and multi-sensing capabilities for various simulation of human skin's functions still remains a great challenge. Here, based on simple and convenient one-step covalent cross-linking method enhanced by dynamic RS-Ag interactions, a skin-inspired multifunctional conductive hydrogel with desirable physicochemical properties (including high stretchability, self-adhesion, self-healing, decomposition and removability) is developed for highly sensitive dual-sensing of temperature and strain. Benefiting from the synergistic action of multiple hydrogen bonds, RS-Ag bonds and S-S bonds, the gel exhibited a novel thermosensitive mechanism. The prepared hydrogels exhibited extremely high mechanical properties (maximum tensile strength of 0.35 MPa, elongation at break nearly 1800%, compressive stress over 4.43 MPa), excellent self-healing (96.82% (stress), 88.45% (temperature), 73.89% (mechanical property)), decomposition (the molecular weight after decomposition is below 700) and self-adhesion (enhanced contact with the material interface). In addition, this conductive hydrogel could also simultaneously achieve highly sensitive temperature-sensing (TCR: 10.89) and stress-sensing (GF: 1.469). As a proof-to-concept, the hydrogel displayed superior capability for simulation of human skin to perception of touch, pressure and ambient temperature simultaneously, indicating promising applications in the fields of wearable devices, personal health care, and human-machine interfaces.

Super-Long SERS Active Single Silver Nanowires for Molecular Imaging in 2D and 3D Cell Culture Models.

Establishing a systematic molecular information analysis strategy for cell culture models is of great significance for drug development and tissue engineering technologies. Here, we fabricated single silver nanowires with high surface-enhanced Raman scattering activity to extract SERS spectra in situ from two-dimensional (2D) and three-dimensional (3D) cell culture models. The silver nanowires were super long, flexible and thin enough to penetrate through multiple cells. A single silver nanowire was used in combination with a four-dimensional microcontroller as a cell endoscope for spectrally analyzing the components in cell culture models. Then, we adopted a machine learning algorithm to analyze the obtained spectra. Our results show that the abundance of proteins differs significantly between the 2D and 3D models, and that nucleic acid-rich and protein-rich regions can be distinguished with satisfactory accuracy.

Blu-Ray Discs as Universal Biochip Substrates: Lithography-Free Surface Activation and Assay Patterning.

Blu-ray discs (BDs) are advantageous in comparison with other optical discs (compact discs and digital versatile discs) in terms of not only their storage capacity but also the high-quality materials fabricated from. We have recently discovered that the "Hard Coat" film of Verbatim BDs is in fact a unique type of polymeric substrates that can be readily activated and adapted for biochip fabrications. Particularly, the Hard Coat film peeled from BDs is optically transparent without any fluorescence background, which can be activated by treating with a common base (1.0 M NaOH) at a slightly elevated temperature (55 °C). The surface density of reactive carboxylic acid groups generated, 6.6 ± 0.7 × 10-9 mol/cm2, is much higher than that on polycarbonate upon UV/ozone irradiation (4.8 ± 0.2 × 10-10 mol/cm2). There are no significant physical damages to the substrate morphology, and the aging effect is minimal. More importantly, the BD substrate can be patterned using either cut-out filter paper masks or microfluidic channel plates; both are lithography-free, bench-top methods that facilitate the device fabrication in a common laboratory setting. With classical biotin-streptavidin binding and DNA hybridization arrays as trial systems, we have also demonstrated this new type of biochip substrates for quantitative assay applications.

Multifunctional Wearable Sensing Devices Based on Functionalized Graphene Films for Simultaneous Monitoring of Physiological Signals and Volatile Organic Compound Biomarkers.

In this study, a multifunctional wearable sensing device based on two different graphene films is fabricated and can achieve the simultaneous detection of physiological signals and volatile organic compound (VOC) biomarkers without mutual signal interference. The wearable device was designed with two sensing components: on the upper layer of the device, four kinds of porphyrin-modified reduced graphene oxide (rGO) films were prepared and used for a sensor array that could sufficiently react with VOC vapors to achieve highly sensitive detection. A porous rGO film was designed on the underlayer of the device and used as a strain-sensing matrix, which could be closely attached to the skin to achieve a highly sensitive detection of the physiological signal. A polyimide film between the two sensing components was used not only as a flexible substrate, but also as a protective layer to avoid the porous rGO film's response to VOC molecules. Investigation of the detection ability showed that the porous rGO strain-sensing matrix can achieve a higher gauge factor (282.28) than the unstructured rGO counterpart (8.96) and is more desirable for the detection of physiological motion. In contrast, the porphyrin-modified rGO sensor array displayed a superior response to VOC vapors, and eight different VOC biomarkers could be detected and discriminated using the as-prepared sensor array together with a pattern recognition approach. The multifunctional sensing devices displayed excellent ability for the detection of a variety of human physiological signals, such as pulse and respiration rates. Simultaneous analysis of simulated diabetic breath samples, simulated nephrotic breath samples, and breath samples exhaled by healthy individuals using our wearable device exhibited clear identification and discrimination. Our study provides new insights into fabrication and design of multifunctional sensing devices without signal interference, and the application of the proposed devices are promising in preventive medicine and health care.

A multifunctional wearable sensor based on a graphene/inverse opal cellulose film for simultaneous, in situ monitoring of human motion and sweat.

A multifunctional, wearable sensor based on a reduced oxide graphene (rGO) film onto a porous inverse opal acetylcellulose (IOAC) film has been developed and can perform simultaneous, in situ monitoring of various human motions and ion concentrations in sweat. The rGO film is used as a strain-sensing layer for monitoring human motion via its resistance change, whereas the porous IOAC film is used as a flexible microstructured substrate not only for high sensitive motion sensing, but also for collection and analysis of ion concentrations in sweat by its simple colorimetric changes or reflection-peak shifts. Studies on humans demonstrated that the devices have excellent capability for monitoring various human motions, such as finger bending motion, wrist bending motion, head rotation motion and various small-scale motions of the throat. Simultaneous, in situ analysis of the ion concentration in sweat during these motions shows that the IOAC substrate can detect a wide range of NaCl concentrations in sweat from normal 30 to 680 mM under the conditions of severe dehydration. This investigation provides new horizons toward the design and fabrication of multifunctional, wearable health monitoring devices and the proposed wearable sensor shows promising applications in healthcare and preventive medicine.

Mechanical tension applied to substrate films specifies location of neuritogenesis and promotes major neurite growth at the expense of minor neurite development.

One obstacle in neural repair is facilitating axon growth long enough to reach denervated targets. Recent studies show that axonal growth is accelerated by applying tension to bundles of neurites, and additional studies show that mechanical tension is critical to all neurite growth. However, no studies yet describe how individual neurons respond to tensile forces applied to cell bodies and neurites simultaneously; neither do any test motor neurons, a phenotype critical to neural repair. Here we examine the growth of dissociated motor neurons on stretchable substrates. E15 spinal motor neurons were cultured on poly-lactide-co-glycolide films stretched at 4.8, 9.6, or 14.3 mm day(-1). Morphological analysis revealed that substrate stretching has profound effects on developing motor neurons. Stretching increases major neurite length; it also forces neuritogenesis to occur nearest poles of the cell closest to the sources of tension. Stretching also reduces the number of neurites per neuron. These data show that substrate stretching affects neuronal morphology by specifying locations on the cell where neuritogenesis occurs and favoring major neurite growth at the expense of minor neurites. These results serve as a building block for development of new techniques to control and improve the growth of neurons for nerve repair purposes.

No transmission of porcine endogenous retrovirus in an acute liver failure model treated by a novel hybrid bioartificial liver containing porcine hepatocytes.

BACKGROUND: A novel hybrid bioartificial liver (HBAL) was constructed using an anionic resin adsorption column and a multi-layer flat-plate bioreactor containing porcine hepatocytes co-cultured with bone marrow mesenchymal stem cells (MSCs). This study aimed to evaluate the microbiological safety of the HBAL by detecting the transmission of porcine endogenous retroviruses (PERVs) into canines with acute liver failure (ALF) undergoing HBAL. METHODS: Eight dogs with ALF received a 6-hour HBAL treatment on the first day after the modeling by D-galactosamine administration. The plasma in the HBAL and the whole blood in the dogs were collected for PERV detection at regular intervals until one year later when the dogs were sacrificed to retrieve the tissues of several organs for immunohistochemistry and Western blotting for the investigation of PERV capsid protein gag p30 in the tissue. Furthermore, HEK293 cells were incubated to determine the in vitro infectivity. RESULTS: PERV RNA and reverse transcriptase activity were observed in the plasma of circuit 3, suggesting that PERV particles released in circuit 3. No positive PERV RNA and reverse transcriptase activity were detected in other plasma. No HEK293 cells were infected by the plasma in vitro. In addition, all PERV-related analyses in peripheral blood mononuclear cells and tissues were negative. CONCLUSION: No transmission of PERVs into ALF canines suggested a reliable microbiological safety of HBAL based on porcine hepatocytes.

New strategy for surface functionalization of periodic mesoporous silica based on meso-HSiO1.5.

Organic functionalization of periodic mesoporous silicas (PMSs) offers a way to improve their excellent properties and wide applications owing to their structural superiority. In this study, a new strategy for organic functionalization of PMSs is demonstrated by hydrosilylation of the recently discovered "impossible" periodic mesoporous hydridosilica, meso-HSiO1.5. This method overcomes the disadvantages of present pathways for organic functionalization of PMSs with organosilica. Moreover, compared to the traditional functionalization on the surface of porous silicon by hydrosilylation, the template-synthesized meso-HSiO1.5 is more flexible to access functional-groups-loaded PMSs with adjustable microstructures. The new method and materials will have wider applications based on both the structure and surface superiorities.

An optical nose chip based on mesoporous colloidal photonic crystal beads.

An optical nose chip is developed using surface functionalized mesoporous colloidal photonic crystal beads as elements. The prepared optical nose chip displays excellent discrimination among a very wide range of compounds, not only the simplex organic vapors from the different or same chemical family, but also the complex expiratory air from different people.

Highly Aligned Poly(3,4-ethylene dioxythiophene) (PEDOT) Nano- and Microscale Fibers and Tubes.

This study reports a facile method for the fabrication of aligned Poly(3,4-ethylene dioxythiophene) (PEDOT) fibers and tubes based on electrospinning and oxidative chemical polymerization. Discrete PEDOT nano- and microfibers and nano- and microtubes are difficult to fabricate quickly and reproducibly. We employed poly(lactide-co-glycolide) (PLGA) polymers that were loaded with polymerizable 3,4-ethylene dioxythiophene (EDOT) monomer to create aligned nanofiber assemblies using a rotating glass mandrel during electrospinning. The EDOT monomer/PLGA polymer blends were then polymerized by exposure to an oxidative catalyst (FeCl3). PEDOT was polymerized by continuously dripping a FeCl3 solution onto the glass rod during electrospinning. The resulting PEDOT fibers were conductive, aligned and discrete. Fiber bundles could be easily produced in lengths of several centimeters. The PEDOT sheath/PLGA core fibers were immersed in chloroform to remove the PLGA and any residual EDOT resulting in hollow PEDOT tubes. This approach made it possible to easily generate large areas of aligned PEDOT fibers/tubes. The structure and properties of the aligned assemblies were measured using optical microscopy, electron microscopy, Raman spectroscopy, thermal gravimetric analysis, and DC conductivity measurements. We also demonstrated that the aligned PEDOT sheath/PLGA core fiber assemblies could be used in supporting and directing the extension of dorsal root ganglia (DRG) neurons in vitro.

Spherical porphyrin sensor array based on encoded colloidal crystal beads for VOC vapor detection.

A spherical porphyrin sensor array using colloidal crystal beads (CCBs) as the encoding microcarriers has been developed for VOC vapor detection. Six different porphyrins were coated onto the CCBs with distinctive encoded reflection peaks via physical adsorption and the sensor array was fabricated by placing the prepared porphyrin-modified CCBs together. The change in fluorescence color of the porphyrin-modified CCBs array serves as the detection signal for discriminating between different VOC vapors and the reflection peak of the CCBs serves as the encoding signal to distinguish between different sensors. It was demonstrated that the VOC vapors detection using the prepared sensor array showed excellent discrimination: not only could the compounds from the different chemical classes be easily differentiated (e.g., alcohol vs acids vs ketones) but similar compounds from the same chemical family (e.g., methanol vs ethanol) and the same compound with different concentration ((e.g., Sat. ethanol vs 60 ppm ethanol vs 10 ppm ethanol) could also be distinguished. The detection reproducibility and the humidity effect were also investigated. The present spherical sensor array, with its simple preparation, rapid response, high sensitivity, reproducibility, and humidity insensitivity, and especially with stable and high-throughput encoding, is promising for real applications in artificial olfactory systems.

Colorimetric photonic hydrogel aptasensor for the screening of heavy metal ions.

We have developed a robust method for the visual detection of heavy metal ions (such as Hg(2+) and Pb(2+)) by using aptamer-functionalized colloidal photonic crystal hydrogel (CPCH) films. The CPCHs were derived from a colloidal crystal array of monodisperse silica nanoparticles, which were polymerized within the polyacrylamide hydrogel. The heavy metal ion-responsive aptamers were then cross-linked in the hydrogel network. During detection, the specific binding of heavy metal ions and cross-linked single-stranded aptamers in the hydrogel network caused the hydrogel to shrink, which was detected as a corresponding blue shift in the Bragg diffraction peak position of the CPCHs. The shift value could be used to estimate, quantitatively, the amount of the target ion. It was demonstrated that our CPCH aptasensor could screen a wide concentration range of heavy metal ions with high selectivity and reversibility. In addition, these aptasensors could be rehydrated from dried gels for storage and aptamer protection. It is anticipated that our technology may also be used in the screening of a broad range of metal ions in food, drugs and the environment.

Evaluation of a novel hybrid bioartificial liver based on a multi-layer flat-plate bioreactor.

AIM: To evaluate the efficacy and safety of a hybrid bioartificial liver (HBAL) system in the treatment of acute liver failure. METHODS: Canine models with acute liver failure were introduced with intravenous administration of D-galactosamine. The animals were divided into: the HBAL treatment group (n = 8), in which the canines received a 3-h treatment of HBAL; the bioartificial liver (BAL) treatment group (n = 8), in which the canines received a 3-h treatment of BAL; the non-bioartificial liver (NBAL) treatment group (n = 8), in which the canines received a 3-h treatment of NBAL; the control group (n = 8), in which the canines received no additional treatment. Biochemical parameters and survival time were determined. Levels of xenoantibodies, RNA of porcine endogenous retrovirus (PERV) and reverse transcriptase (RT) activity in the plasma were detected. RESULTS: Biochemical parameters were significantly decreased in all treatment groups. The TBIL level in the HBAL group was lower than that in other groups (2.19 ± 0.55 µmol/L vs 24.2 ± 6.45 µmol/L, 12.47 ± 3.62 µmol/L, 3.77 ± 1.83 µmol/L, P < 0.05). The prothrombin time (PT) in the BAL and HBAL groups was significantly shorter than the NBAL and control groups (18.47 ± 4.41 s, 15.5 ± 1.56 s vs 28.67 ± 5.71 s, 21.71 ± 3.4 s, P < 0.05), and the PT in the HBAL group was shortest of all the groups. The albumin in the BAL and HBAL groups significantly increased and a significantly higher level was observed in the HBAL group compared with the BAL group (27.7 ± 1.7 g/L vs 25.24 ± 1.93 g/L). In the HBAL group, the ammonia levels significantly decreased from 54.37 ± 6.86 to 37.75 ± 6.09 after treatment (P < 0.05); there were significant difference in ammonia levels between other the groups (P < 0.05). The levels of antibodies were similar before and after treatment. The PERV RNA and the RT activity in the canine plasma were all negative. CONCLUSION: The HBAL showed great efficiency and safety in the treatment of acute liver failure.

Microbiological safety of a novel bio-artificial liver support system based on porcine hepatocytes: a experimental study.

BACKGROUND: Our institute has developed a novel bio-artificial liver (BAL) support system, based on a multi-layer radial-flow bioreactor carrying porcine hepatocytes and mesenchymal stem cells. It has been shown that porcine hepatocytes are capable of carrying infectious porcine endogenous retroviruses (PERVs) into human cells, thus the microbiological safety of any such system must be confirmed before clinical trials can be performed. In this study, we focused on assessing the status of PERV infection in beagles treated with the novel BAL. METHODS: Five normal beagles were treated with the novel BAL for 6 hours. The study was conducted for 6 months, during which plasma was collected from the BAL and whole blood from the beagles at regular intervals. DNA and RNA in both the collected peripheral blood mononuclear cells (PBMCs) and plasma samples were extracted for conventional PCR and reverse transcriptase (RT)-PCR with PERV-specific primers and the porcine-specific primer Sus scrofa cytochrome B. Meanwhile, the RT activity and the in vitro infectivity of the plasma were measured. RESULTS: Positive PERV RNA and RT activity were detected only in the plasma samples taken from the third circuit of the BAL system. All other samples including PBMCs and other plasma samples were negative for PERV RNA, PERV DNA, and RT activity. In the in vitro infection experiment, no infection was found in HEK293 cells treated with plasma. CONCLUSIONS: No infective PERV was detected in the experimental animals, thus the novel BAL had a reliable microbiological safety profile.

Factors influencing the transfer of porcine endogenous retroviruses across the membrane in bioartificial livers.

OBJECTIVES: to investigate the factors influencing the transfer of porcine endogenous retroviruses (PERVs) across the membrane in a new bioartificial liver (BAL). METHODS: A new BAL containing 2 circuits was constructed using plasma component separators with membrane pore sizes of 10 nm, 20 nm, 30 nm, and 35 nm, or a plasma filter with a membrane pore size of 500 nm. Cocultured cells of porcine hepatocytes and mesenchymal stem cells or single porcine hepatocytes were incubated in the bioreactors, and the BAL worked for 72 hours, with supernatant samples in internal and external circuits collected every 12 hours. PERV RNA, reverse transcriptase (RT) activity, and in vitro infectivity of the supernatant were detected. RESULTS: With the plasma filters, the results of PERV detection were the same in both circuits. With plasma component separators, PERV RNA was found in the external circuits, but no positive RT activity or HEK293 cell infection was found. The time at which the PERV RNA was first detected varied with the pore size of membrane; the larger the membrane pore size was, the earlier the RNA was detected. The PERV RNA level in the external circuits was reduced significantly compared with that in the internal circuits at any detecting time. CONCLUSIONS: The plasma component separators with membrane pore size =35 nm could significantly reduce the passage of infectious PERVs. And the membrane pore size, the treatment duration, and the viral level in the internal circuit were potential factors influencing the transfer of PERVs across the membrane in a BAL. In addition, a low risk of PERV transmission from porcine hepatocytes to human cells was found.

The study of adsorption characteristics of electrospun polymer nanofibers for benzenes in water.

The adsorption properties of benzene, p-dichlorobenzene and nitrobenzene on polymer nanofibers were studied. Compared with polyacrylonitrile nanofiber, polystyrene (PS) nanofiber presented better adsorption performance. Langmuir and Freundlich adsorption models were used for the mathematical description of adsorption equilibria, and Freundlich isotherms fitted better. Kinetic studies showed that the adsorption of PS nanofiber followed pseudo first-order model. Various thermodynamic parameters such as standard free energy (delta G), enthalpy (delta H) and entropy (delta S) were calculated for predicting the adsorption nature of PS nanofiber for three benzenes, which indicated that the adsorption was spontaneous and a physical process. The regeneration efficiency maintains over 80% after five cycles of adsorption/desorption tests. It showed that PS nanofibers are promising candidates for adsorption and removal of aromatic hydrocarbons from water.

No enhanced expression and infectivity of porcine endogenous retrovirus in primary porcine hepatocytes with chitosan nanofiber scaffold.

Our previous report suggested that chitosan nanofiber scaffold may find application in bioartificial livers for it could enhance the function of hepatocytes. This study was focused on its microbiological safety, that is, its influence on the expression and infectivity of porcine endogenous retrovirus (PERV) in primary porcine hepatocytes. Freshly isolated porcine hepatocytes were cultured with or without chitosan nanofiber scaffold (defined as Exp group and Ctr group) and porcine kidney 15 (PK15) cells were cultured as positive control (defined as PK15 group). The supernatant was removed and substituted with new culture media after 24 hours followed by collecting the media and cells 72 hours later. To quantitative analyze PERV in the supernatant, the PERV RNA and capsid protein gag p30 were detected by dilution technique and RT activity was determined by specific kits. As a result, PERV RNA level, capsid protein and RT activity were all of no significant difference between Exp group and Ctr group, but these indices of the Exp group and Ctr group were both significantly lower than the PK15 group. To determine the expressing level of PERV in the cells, PERV RNA and capsid protein in the cell lysate were detected by RT-PCR and western blot with the software measurement of band lightness. Similarly, there was no difference for the amount of PERV RNA and capsid protein between Exp group and Ctr group but there was a higher PERV RNA level in PK15 group with no significant difference in protein level. Besides, the in-vitro infectivity of the supernatant was tested by incubating the human embryonic kidney 293 (HEK293) cells, showing no infection. In conclusion, chitosan nanofiber scaffold did not change the low expression and infectivity of PERV in porcine hepatocytes and it was safe for application in bio-artificial livers.