Highly effective and uniform SERS substrates fabricated by etching multi-layered gold nanoparticle arrays.

Gold nanoparticle multilayers printed on silicon substrates layer by layer were etched by a gold etchant to form highly effective and uniform substrates for surface-enhanced Raman scattering (SERS). The performance of the SERS substrates was systematically studied by adjusting the number of nanoparticle layers and the etching time. The optimized enhancement factor (EF) and the detection limit of the substrates were determined to be 8.6 × 10(6) and 1 × 10(-12) M, respectively. The high EF and low detection limit were attributed to the high density of "hot-spots" and the facile accession of probe molecules to these spots. Moreover, the SERS substrates exhibited a nice uniformity with a small spot-to-spot variation and a good sample-to-sample reproducibility as well. The experimental results were supported by finite-difference time domain (FDTD) simulations. Our study suggests that low-cost, large-scale, and uniform SERS substrates with a high EF and low detection limit can be achieved by using bottom-up chemical methods.

Fabrication of freestanding nanoparticle membranes over wells.

Freestanding nanoparticle membranes over circular wells are prepared by utilizing surface engineering. The crucial step of this method is the hydrophobic treatment of the substrate surface, which causes the water droplet to be suspended over wells during drying. Consequently, the nanoparticle monolayer self-assembled at the surface of the water droplet would drape itself over wells instead of being dragged into wells and ruptured into patches after the evaporation of water. This scenario was confirmed by the results of control experiments with changes in the hydrophobicity of the surface and the depth of wells. Moreover, the NaCl crystallization experiment provides additional evidence for the dynamic process of drying. Freestanding nanoparticle membranes with different nanoparticle core sizes and different lengths of ligands have been successfully prepared using the same route. The Young's modulus of one typical kind of prepared freestanding nanoparticle membrane was measured with force microscopy.

Controllability of the Coulomb charging energy in close-packed nanoparticle arrays.

We studied the electronic transport properties of metal nanoparticle arrays, particularly focused on the Coulomb charging energy. By comparison, we confirmed that it is more reasonable to estimate the Coulomb charging energy using the activation energy from the temperature-dependent zero-voltage conductance. Based on this, we systematically and comprehensively investigated the parameters that could be used to tune the Coulomb charging energy in nanoparticle arrays. We found that four parameters, including the particle core size, the inter-particle distance, the nearest neighboring number, and the dielectric constant of ligand molecules, could significantly tune the Coulomb charging energy.