TE/TM mode electro-optic conversion based on a titanium diffusion lithium niobate waveguide with a polarization-maintained fiber structure.

For the development of photonic integrated circuits and lithium niobate (L i N b O 3, LN) optical waveguide technology, the implementation and application of polarization devices based on LN are also becoming more widespread, where titanium (Ti)-diffused LN waveguides form the basis of many important electro-optic (EO) integrated optical devices. Moreover, utilizing polarization conversion has the potential to enhance both the effectiveness and capacity of optical transmission. Thus, we have presented an EO polarization mode converter packaging with PANDA polarization-maintaining optical fibers (PMFs) in the broadband wavelength range (1440-1620 nm) to obtain the multiwavelength modulation, featuring the wavelength tunability. Additionally, the fabricated device is able to achieve transverse electric (TE) to transverse magnetic (TM) mode conversion efficiently with the applied voltage of  ±, which provides high conversion efficiency. Importantly, our device also features a high-frequency response of about 600 MHz with overall insertion loss below 5 dB. The rapid development of LN-based polarization devices holds great promise for chip-integrated systems in the field of polarization telecommunication.

Broadband, Polarization-Sensitive, and Self-Powered High-Performance Photodetection of Hetero-Integrated MoS2 on Lithium Niobate.

High-performance photodetectors hold promising potential in optical communication and imaging systems. However, conventional counterparts are suffering narrow detection range, high power consumption, and poor polarization sensitivity. Characteristics originating from switchable polarization in ferroelectrics can be used to optimize the photo-to-electric procedure and improve the photodetection performance. In this regard, we constructed a configuration by integrating 2-dimensional molybdenum disulfide (MoS2) with ferroelectric lithium niobate (LiNbO3), resulting in the MoS2/LiNbO3 heterostructured photodetector. Benefiting from the pyroelectric effect of LiNbO3, the limitation of bandgap on the detection range can be broken, thus broadening the response band of the detector to 365 to 1,064 nm, as well as enabling the self-powered characteristic. Meanwhile, high carrier mobility and decent light absorbance of MoS2 introduce robust light-matter interactions with the underlying LiNbO3, leading to ultrafast rise/fall times of ≈150 µs/250 µs and switching ratios of up to ≈190. Moreover, the highest responsivity, specific detectivity, and external quantum efficiency achieved were 17.3 A·W-1, 4.3 × 1011 Jones, and 4,645.78%, respectively. Furthermore, because of the anisotropy of the spontaneous-polarized LiNbO3 substrate, the photocurrent of the device achieved a dichroic ratio of 7.42, comparing favorably to most MoS2-based photodetectors. This work demonstrates the integration potential between ferroelectric LiNbO3 and 2-dimensional materials for high-performance photodetection.

MiR-766-3p and miR-671-5p attenuate aristolochic acid-induced hepatotoxicity by directly targeting the key bioactivating enzyme NQO1.

Aristolochic acid (AA) as an emerging contaminant in herbal medicines or crops has been well-recognized for causing nephropathy since 1990s. Over the last decade, mounting evidence has linked AA to liver injury; however, the underlying mechanism is poorly elucidated. MicroRNAs respond to environmental stress and mediate multiple biological processes, thus showing biomarker potentials prognostically or diagnostically. In the present study, we investigated the role of miRNAs in AA-induced hepatotoxicity, specifically in regulating NQO1, the key enzyme responsible for AA bioactivation. In silico analysis showed that hsa-miR-766-3p and hsa-miR-671-5p were significantly associated with AAI exposure as well as NQO1 induction. A 28-day rat experiment of 20 mg/kg AA exposure demonstrated a 3-fold increase of NQO1 and an almost 50 % decrease of the homologous miR-671 that were accompanied with liver injury, which was consistent with in silico prediction. Further mechanistic investigation using Huh7 cells with IC50 of AAI at 146.5 µM showed both hsa-miR-766-3p and hsa-miR-671-5p were able to directly bind to and down-regulate NQO1 basal expression. In addition, both miRNAs were shown to suppress AAI-induced NQO1 upregulation in Huh7 cells at a cytotoxic concentration of 70 µM, and consequently alleviate AAI-induced cellular effects, including cytotoxicity and oxidative stress. Together, these data illustrate that miR-766-3p and miR-671-5p attenuate AAI-induced hepatotoxicity, and thus have monitoring and diagnostic potentials.

Directional Bloch surface wave coupling enabled by magnetic spin-momentum locking of light.

We study the magnetic spin-locking of optical surface waves. Through an angular spectrum approach and numerical simulations, we predict that a spinning magnetic dipole develops a directional coupling of light to transverse electric (TE) polarized Bloch surface waves (BSWs). A high-index nanoparticle as a magnetic dipole and nano-coupler is placed on top of a one-dimensional photonic crystal to couple light into BSWs. Upon circularly polarized illumination, it mimics the spinning magnetic dipole. We find that the helicity of the light impinging on the nano-coupler controls the directionality of emerging BSWs. Furthermore, identical silicon strip waveguides are configured on the two sides of the nano-coupler to confine and guide the BSWs. We achieve a directional nano-routing of BSWs with circularly polarized illumination. Such a directional coupling phenomenon is proved to be solely mediated by the optical magnetic field. This offers opportunities for directional switching and polarization sorting by controlling optical flows in ultra-compact architectures and enables the investigation of the magnetic polarization properties of light.

Revealing the antibacterial power of hydrogen-releasing PdH nanohydride against drug resistant Staphylococcus aureus: an in-depth mechanism study.

Currently, multidrug resistant (MDR) bacterial infections are a great threat to public health, and the development of novel strategies for high efficiency combatting of MDR bacteria is in urgent demand. Hydrogen (H2) is a small gas with a high reducing ability, and plenty of recent studies have demonstrated its therapeutic effect on many diseases. However, the antibacterial effectiveness and mechanism of H2 against MDR bacteria are still unknown. In the present work, using PdH nanohydride with a temperature responsive H2-releasing property as the H2 source, we demonstrated that H2 was not only able to inhibit the growth of normal Staphylococcus aureus (S. aureus), but could also effectively eliminate single drug resistant S. aureus (CRSA) and multidrug resistant S. aureus (MRSA), as well as the biofilms formed by those bacteria. Moreover, an in-depth mechanism regarding the anti-antibiotic-resistance activity of H2 was elucidated by us, in which H2 exerted its antibacterial effect by firstly causing severe membrane damage, followed by boosting generation of intracellular ROS, which subsequently triggered DNA damage and finally led to bacterial death. The proposed mechanism was further verified by genomic analysis, where a cluster of genes related to bacterial membrane integrity, biofilm formation, metabolism and DNA functions was significantly perturbed by the released H2. In particular, H2 boosted intracellular ROS generation by destroying the redox homeostasis of bacterial metabolism. More importantly, we revealed that H2 was able to alleviate the antibiotic resistance of CRSA and MRSA by significantly down-regulating the expression of many drug-resistant genes, e.g. the norG gene of CRSA, and fmtA, gpsB, sarA and marR genes of MRSA, as well as reducing the minimal inhibitory concentration (MIC) of ciprofloxacin/ampicillin against CRSA/MRSA. The findings in our work suggested that H2 therapy is a promising tool for combating antibiotic-resistant bacteria.

Identifying microRNAs that drive BaP-induced pulmonary effects: Multiple patterns of mechanisms underlying activation of the toxicity pathways.

MiRNAs are widely acknowledged as regulating gene expression and thus, being involved in broad biological functions, environmental responses, and the process of diseases. Epidemiology could provide exposure- or disease-relevant miRNAs, while toxicology could reveal the underlying mechanisms. Here, a new "Bottom-up" approach was proposed to identify miRNAs that are responsible for environmental exposure-induced adverse outcomes. In our previous study, 5 key toxicity pathways were established underlying BaP-induced lung diseases; further, genes from these 5 pathways that were responsive to BaP exposure in HBE-CYP1A1 cells were identified. In this study, we identified 26 miRNA:mRNA interactions during BaP exposure through RNA-sequencing using the same HBE-CYP1A1 cells. According to the expression alteration and regulatory mechanisms, we summarized 8 action patterns of miRNA:mRNA, which led to the induction of miRNAs that predominantly regulate target genes and responsible are for the pathway perturbations (as "drivers"), and miRNAs that subordinately regulate genes during pathway perturbations (as "symptoms"). 5 corresponding miRNAs: miR-3173-5p, miR-629-3p, miR-9-5p, miR-1343-3p and miR-219a-1-3p were identified as "drivers", and were all validated with expression alteration in lung disease patients from published studies. In conclusion, this study offers a new approach to identification of epigenetic factors that may shed light on the causation of environment-related health outcomes.

Electro-optic high-speed optical beam shifting based on a lithium niobate tapered waveguide.

We propose an electro-optic on-chip beam shifting device based on gradient microstructured electrodes and an optical tapered waveguide fabricated using lithium niobate (LN). The distribution of refractive index variations of the optical waveguide can be electro-optically defined and tailored by the designed gradient microstructured electrodes, which directs the beam propagation and shifting. The length of the beam shifting device is 18 mm and the width of the waveguide is gradually increased from 8 µm to 80 µm. The functionality of the beam shifting device is experimentally demonstrated, and it is observed that it has an electro-optic tunability of 0.41 µm/V, and a high-speed response time of 19 ns (λ=1310 nm). This study can provide potential applications in optical switching and modulation, beam scanning and ranging, optical spatial communications, etc.

SnSe-Coated Microfiber Resonator for All-Optical Modulation.

In this study, a tin monoselenide (SnSe)-based all-optical modulator is firstly demonstrated with high tuning efficiency, broad bandwidth, and fast response time. The SnSe nanoplates are deposited in the microfiber knot resonator (MKR) on MgF2 substrate and change its transmission spectra by the external laser irradiation. The SnSe nanoplates and the microfiber are fabricated using the liquid-phase exfoliation method and the heat-flame taper-drawing method, respectively. Due to the strong absorption and enhanced light-matter interaction of the SnSe nanoplates, the largest transmitted power tunability is approximately 0.29 dB/mW with the response time of less than 2 ms. The broad tuning bandwidth is confirmed by four external pump lights ranging from ultraviolet to near-infrared. The proposed SnSe-coated microfiber resonator holds promising potential for wide application in the fields of all-optical tuning and fiber sensors.

High throughput data-based, toxicity pathway-oriented development of a quantitative adverse outcome pathway network linking AHR activation to lung damages.

The quantitative adverse outcome pathway (qAOP) is proposed to inform dose-responses at multiple biological levels for the purpose of toxicity prediction. So far, qAOP models concerning human health are scarce. Previously, we proposed 5 key molecular pathways that led aryl hydrogen receptor (AHR) activation to lung damages. The present study assembled an AOP network based on the gene expression signatures of these toxicity pathways, and validated the network using publicly available high throughput data combined with machine learning models. In addition, the AOP network was quantitatively evaluated with omics approaches and bioassays, using 16HBE-CYP1A1 cells exposed to benzo(a)pyrene (BaP), a prototypical AHR activator. Benchmark dose (BMD) analysis of transcriptomics revealed that AHR gene held the lowest BMD value, whereas AHR pathway held the lowest point of departure (PoD) compared to the other 4 pathways. Targeted bioassays were further performed to quantitatively understand the cellular responses, including ROS generation, DNA damage, interleukin-6 production, and extracellular matrix increase marked by collagen expression. Eventually, response-response relationships were plotted using nonlinear model fitting. The present study developed a highly reliable AOP model concerning human health, and validated as well as quantitatively evaluated it, and such a method is likely to be adoptable for risk assessment.

Ultrasensitive temperature sensor and mode converter based on a modal interferometer in a two-mode fiber.

This paper presents an ultrasensitive temperature sensor and tunable mode converter based on an isopropanol-sealed modal interferometer in a two-mode fiber. The modal interferometer consists of a tapered two-mode fiber (TTMF) sandwiched between two single-mode fibers. The sensor provides high-sensitivity temperature sensing by taking advantages of TTMF, isopropanol and the Vernier-like effect. The TTMF provides a uniform modal interferometer with LP01 and LP11 modes as well as strong evanescent field on its surface. The temperature sensitivity of the sensor can be improved due to the high thermo-optic coefficient of isopropanol. The Vernier-like effect based on the overlap of two interference spectra is applied to magnify the sensing capabilities with a sensitivity magnification factor of 58.5. The temperature sensor is implemented by inserting the modal interferometer into an isopropanol-sealed capillary. The experimental and calculated results show the transmission spectrum exhibit blue shift with increasing ambient temperature. Experimental results show that the isopropanol-sealed modal interferometer provides a temperature sensitivity up to -140.5 nm/°C. The interference spectrum has multiple dips at which the input LP01 mode is converted to the LP11 mode. This modal interferometer acts as a tunable multi-channel mode converter. The mode converter that can be tuned by varying temperature and mode switch is realized.

Broadband mode-selective couplers based on tapered side-polished fibers.

We propose the broadband mode-selective coupler (MSC) formed with a side-polished six mode fiber (6MF) and a tapered side-polished small core single-mode fiber (SC-SMF) or an SMF. The MSCs are designed to allow the LP01 mode in the SC-SMF and SMF to completely couple to the LP01, LP11, LP21, LP02, LP31, LP12 modes in the 6MF over a broadband wavelength range. The phase-matching conditions of the MSCs are satisfied by tapering the SC-SMF and SMF to specific diameters. The tapered fibers are side-polished to designed residual fiber thickness using the wheel polishing technique. The effective indices of the side-polished fibers are measured with the prism coupling method. The MSCs provide high coupling ratio and high mode purity. High coupling efficiencies in excess of 81% for all the higher-order modes are obtained in the wavelength range 1530-1600 nm. For the LP01, LP11, LP21, LP02, LP31, LP12 MSCs at 1550 nm, the coupling ratios are 96.2%, 99.8%, 89.5%, 85.0%, 90.9%, 96.1%, respectively, and the mode purity of the MSCs is higher than 88.0%. The loss of the MSCs is lower than 1.8 dB in the wavelength range 1530-1600 nm. This device can be applied in broadband mode-division multiplexing transmission systems.

Highly efficient second harmonic generation of thin film lithium niobate nanograting near bound states in the continuum.

Bound states in the continuum (BICs) are ubiquitous physical phenomena where such states occur due to strong coupling between leaky modes in side lossy systems. BICs in meta-optics and nanophotonics enable optical mode confinement to strengthen local field enhancement in nonlinear optics. In this study, we numerically investigate second-harmonic generation (SHG) in the vicinity of BICs with a photonic structure comprising one-dimensional nanogratings and a slab waveguide made of lithium niobate (LiNbO3, LN). By breaking the symmetry of LN nanogratings, BICs transition to quasi-BICs, which enable strong local field confinement inside LN slab waveguide to be supported, thereby resulting in improving SHG conversion with lower pump power of fundamental frequency (FW). With a peak intensity of 1.33 GW cm-2at the FW, our structure features a second-harmonic conversion efficiency up to 8.13 × 10-5at quasi-BICs. We believe that our results will facilitate the application of LN in integrated nonlinear nanophotonic.

Optical fiber bio-sensor for phospholipase using liquid crystal.

A cost-effective and label-free optical fiber sensor was proposed to detect phospholipase A2 (PLA2) in nM concentration. The sensor is made of an alkoxysilane-modified side-polished fiber (SPF) coated with 4'-pentyl-4-cyanobiphenyl (5CB) and self-assembled phospholipid (L-DLPC). It is found that the relative transmission optical power (RTOP) of the fiber sensor decreases due to the 5CB realignment and redistribution induced by the PLA2 hydrolysis of L-DLPC. The response-time at 5 dB RTOP variation exhibits an exponential dependence on PLA2 concentration, allowing us to detect the PLA2 by the 5 dB-response time. This detection method can reduce the detection time. Compare with the traditional copper-grid sensor, the proposed novel fiber sensor has a lower detection limit (<1 nM). Furthermore, the sensor has good repeat-ability and specificity.The sensor's RTOP variation for PLA2 detection at 1 nM is ~21 times higher than that for five other enzymes (trypsin, amylase, thrombin, glucose oxidase, pepsin) at 1000 nM and lipase at 50 nM. This confirms the sensor's excellent PLA2 specificity. The fiber sensor provides a potential way to be incorporated into micro-flow chips to quantitatively detect biological molecules in a real-time and online manner.

Residual thickness enhanced core-removed D-shaped single-mode fiber and its application for VOC evaporation monitoring.

A core-removed D-shaped structure with different residual thickness (RT) was manufactured on a single mode silica fiber (SMF) to enhance the sensitivity by using of ultra-precise polishing technology. With six different RTs ranging from ∼55 µm to ∼28 µm, the RT enhancement effect in a D-shaped SMF was researched in detail. The influence of the RT on its transmission spectra was investigated both theoretically and experimentally. Considering a compromise between the multimode interference efficiency and optical power loss, an optimum RT value of 34.09 µm was achieved. The obtained refractive index (RI) sensitivity was 10243 nm/RIU in the RI range of 1.430-1.444, corresponding to a RI resolution of 1.9×10-6 RIU. A high-performance all-fiber sensor was developed to monitor the evaporation process volatile organic compounds (VOCs) based on the RT-enhanced D-shaped SMF. As proof of concept, a 2-hour continuous monitoring was carried to monitor the chloroform and alcohol mixture. As a result, the evaporation of alcohol and chloroform were clearly identified and monitored. The developed RT-enhanced D-shaped fiber sensor provides an alternative way for chemical process monitoring and industrial applications.

Exploiting black phosphorus based-Tamm plasmons in the terahertz region.

Polarization-sensitive Tamm plasmons are investigated in a multi-layer photonic configuration where a monolayer black phosphorus (BP) is coated on a Bragg mirror separated by a dielectric. Owing to the in-plane anisotropy of BP, the Tamm plasmon can be excited selectively by tuning the BP carrier density. Cross-polarization conversion occurs when the armchair direction of BP makes an angle with the incident plan, i.e., ϕ≠0 or 90°. The BP-based Tamm device can be used as an intensity modulator with a modulation depth up to ∼100% and an insertion loss smaller than -0.55 dB. By analyzing the polarization evolution carefully, a multichannel polarization division multiplexing scheme is proposed and discussed. These findings open a new avenue for exploiting versatile tunable THz devices based on the monolayer of BP.

Ultrafast freestanding microfiber humidity sensor based on three-dimensional graphene network cladding.

An all-fiber humidity sensor is proposed and fabricated by depositing three-dimensional graphene network (3DGN) around the surface of a freestanding microfiber (MF). The high specific surface area and porosity of 3DGN enhances its interaction with water molecules, allowing high performance of the humidity sensor. The sensor can operate in a wide relative humidity (RH) range of 11.6%RH-90.9%RH with a high sensitivity of -2.841 dB/%RH in the RH range (80.3%RH - 90.9%RH). The response and recovery times of this type of microfiber sensor are measured respectively to be 57 ms and 55 ms, which are one order magnitude faster than those of other fiber RH sensors activated by two-dimensional materials coating. Such an all-fiber RH sensor with high sensitivity and fast response property possesses great potential of application in widespread fields, such as biology, chemical processing and food processing.

Quartz-enhanced photoacoustic spectroscopy employing pilot line manufactured custom tuning forks.

Pilot line manufactured custom quartz tuning forks (QTFs) with a resonance frequency of 28 kHz and a Q value of >30, 000 in a vacuum and ∼ 7500 in the air, were designed and produced for trace gas sensing based on quartz enhanced photoacoustic spectroscopy (QEPAS). The pilot line was able to produce hundreds of low-frequency custom QTFs with small frequency shift < 10 ppm, benefiting the detecting of molecules with slow vibrational-translational (V-T) relaxation rates. An Au film with a thickness of 600 nm were deposited on both sides of QTF to enhance the piezoelectric charge collection efficiency and reduce the environmental electromagnetic noise. The laser focus position and modulation depth were optimized. With an integration time of 84 s, a normalized noise equivalent absorption (NNEA) coefficient of 1.7 × 10-8 cm-1∙W∙Hz-1/2 was achieved which is ∼10 times higher than a commercially available QTF with a resonance frequency of 32 kHz.

All-Optical Tuning of Light in WSe2-Coated Microfiber.

The tungsten diselenide (WSe2) has attracted considerable interest owing to their versatile applications, such as p-n junctions, transistors, fiber lasers, spintronics, and conversion of solar energy into electricity. We demonstrate all-optical tuning of light in WSe2-coated microfiber (MF) using WSe2's broad absorption bandwidth and thermo-optic effect. The transmitted optical power (TOP) can be tuned using external incidence pump lasers (405, 532, and 660 nm). The sensitivity under 405-nm pump light excitation is 0.30 dB/mW. A rise/fall time of ~ 15.3/16.9 ms is achieved under 532-nm pump light excitation. Theoretical simulations are performed to investigate the tuning mechanism of TOP. The advantages of this device are easy fabrication, all-optical control, high sensitivity, and fast response. The proposed all-optical tunable device has potential applications in all-optical circuitry, all-optical modulator, and multi-dimensionally tunable optical devices, etc.

Electron-plasmon interaction on lithium niobate with gold nanolayer and its field distribution dependent modulation.

Surface plasmon resonance (SPR) enables strong field confinement, opening thereby new avenues for device miniaturization and reducing energy consumption. Plasmonic devices with electrical tunability attract tremendous interest for various applications. Most of the current researches achieved SPR modulation with relatively large driving voltages, or by other relatively low-speed tuning approaches, such as thermo-optic, magneto-optic, acousto-optic etc. In this paper, we propose and demonstrate an efficiently electrical SPR modulation based on lithium niobate (LN) with gold nanolayer (~81 nm) via electron-plasmon interaction. Efficient intensity modulation and wavelength shift (in visible band) of ~5.7 dB/V and ~36.3 nm/V are respectively obtained with low DC current. More importantly, modulation phenomenon of field distribution dependent is also observed and experimentally unveiled. Further performance is analyzed in terms of AC modulation and polarization characteristics. This key achievement opens up opportunities for applications such as optical interconnection, electric field sensing, electrically plasmonic modulation, etc.

Tunable asymmetric spin splitting by black phosphorus sandwiched epsilon-near-zero-metamaterial in the terahertz region.

In-plane photonic spin splitting effect is investigated in tunneling terahertz waves through an epsilon-near-zero metamaterial sandwiched between monolayer black phosphorus (BP). The strong in-plane anisotropy of BP layers will induce in-plane asymmetric spin splitting. The asymmetric spin splitting can be flexibly tuned by the angles between the incident plane and the armchair crystalline directions of the top and bottom BP layers, i.e., ϕ1 and ϕ2. Based on this, an angle-resolved barcode-encryption scheme is discussed. For the special case of ϕ1 = ϕ2 = 0 or 90°, the transmitted beam undergoes Goos-Hänchen shift, which varies with the carrier density of BP. We believe these findings can facilitate the development of novel optoelectronic devices in the Terahertz region.