Biosynthesis of TiO2 nano particles by using Rosemary (Rosmarinus officinalis) leaf extracts and its application for crystal dye degradation under sunlight.

Titanium dioxide (TiO2) nanoparticles were prepared through Rosmarinus-officinalis leaf extracts at 90 and 200°C. In this research, the degradations of methylene blues by using TiO2 nanoparticles Sun light radiations were studied. The synthesized materials were characterized using XRDs, UV-Vis, PL, SEM, TEM, EDS and XPS. The results displayed that bio-synthesis temperatures intrude the shapes and sizes of TiO2 nanoparticles. For TiO2-90, micrographs show separable crystalline with irregular morphologies and agglomerate cubic particles. For the other TiO2-200 sample, SEM and TEM micro-imaging shows crumbly agglomerated cubic structures. The XRD shows that the intense peaks observed at angles of 25.37°, 37.19°, 47.81° and 53.89° confirming a highly crystalline oriented as (004), (200), and (105) planes respectively. The optical properties of TiO2 nanoparticles synthesized were conveyed by PL and UV-Vis. The energy band gap calculated was 3.0 eV for both samples; that indicates heating temperature didn't influence the band gap of the samples. The elemental composition Ti and O2 is shown by EDS and XPS. Photo-catalytic experiments discovered that TiO2-90 nanoparticles were well-organized in photo-degradations of MB, likened to TiO2-200. The great activities of TiO2-90 were because of better physicochemical characteristics associated with TiO2-200 effectively degrading MB under photo-light. Photo-degradations of dye under sunlight as plentifully obtainable energy sources by TiO2, synthesized by simpler techniques, can be hopeful to grow an eco-friendly and economical process.

Synthesis of nano-sized lead sulfide thin films from Avocado (Glycosmis cochinchinensis) Leaf extracts to empower pollution remediation.

The translucent and nano-crystalline PbS films were equipped with the CBD techniques on metal substrates by the temperature of 90 °C through aqueous solutions of Lead Nitrate and Thiourea. The XRD phases verify the crystalline property of synthesized thin films that the shape falls in the cubic structures with favourite orientations. It revealed that the prepared material is cubic crystal oriented as (111), (110), (100) and (101) crystal planes. The crystalline size varied between 0.4 and 0.7 nm. The band gap was assessed using UV-vis captivation spectra and Tau relations. The average energy band gap was found to be 2.43 eV which is greater than bulk materials of PbS; because of quantum confinements of Lead Sulfide Nano Crystalline thin films, and PL also confirms this result. The variation in band gap with Leaf extracts and particle sizes displayed blue shifts characteristic of electrons quantum confinements. SEM micrograph shows extremely uniform and adherent PbS films are found at higher PH values. It was evidently observed that the viscosity of the synthesized thin films reduced from 563 to 111 nm with a rise in pH value. The sample prepared at pH 4 shows good performance, and thin films deposited from Avocado (Glycosmis cochinchinensis) leaf extracts are a promising method to empower pollution remediation and future energy.

Biological approach synthesis and characterization of iron sulfide (FeS) thin films from banana peel extract for contamination of environmental remediation.

Biological approach synthesis and characterization of Iron Sulfide (FeS) thin films from banana peel extract for contamination remediation of environment studied. Iron chloride, Sodium thiosulfate and Ethylene-di-amine-tetra acetate (EDTA) were used as precursor solutions without further purification. The nanoparticle of banana peel was extracted and prepared with synthesized FeS thin films and analyzed by X ray-diffraction for structural examination, Scanning electron microscope (SEM) for surface morphological analysis, Ultra-violet-visible-spectrometer (UV-Vis) and photo-luminescence spectro-photo-meter (P-L) for optical characterizations. XRD peaks are shown with recognized to (110), (200), (310), and (301) crystalline planes. The occurrence of this deflection peak are recognised the FeS crystal segment of the tetragonal crystalline systems. SEM micrographs of the films prepared biological method show the distribution of grains, which cover the surface of the substrate completely and are uniform and films deposited purely have defects. The photo-luminescence, absorbance, and transmittance strength of banana peel extract FeS thin film is greater than pure FeS thin films in which wide-ranging and symmetries groups were perceived. In the present study, the comparison of pure FeS thin films and Nano synthesized banana peel extract with FeS thin films was studied. It is observed that Nano synthesized banana fibre absorbs higher than pure FeS thin films in solar cell application. Finally, green synthesis is an ecofriendly, easy and cheap promising method for the fabrication of thin films for solar cell applications.

Preparation and characterization analysis of biofuel derived through seed extracts of Ricinus communis (castor oil plant).

The current study assesses the prospect of using R. Communis seed oil as a substitute fuel for diesel engines. Biodiesel is prepared from the R. Communis plant seed oil by a single-step base catalytic transesterification procedure. The investigation deals with the Physico-chemical characteristics of R. Communis biodiesel and has been associated with the base diesel. It has been perceived that the characteristics of biodiesel are well-matched with the base diesel under the ASTM D6751 limits correspondingly. R. Communis biodiesel is blended in different proportions with base diesel such as D10, D20, D30, D40, D50 and D100 and is tested in a Kirloskar TV1 single-cylinder, 4 blows DI engine under altered loading conditions. Outcomes demonstrate that BTE and BSFC for D10 as well as D20 are similar to base diesel. BSFC indicates that the precise BSFC of base diesel, D10, D20, D30, D40 and D50 was 0.87, 1.70, 2.60, 3.0, 3.4, and 3.5 kg/kW-hr, respectively. The extreme BTE at full load condition for base diesel, D10, D20, D30, D40, D50 and D100 are 28.2%, 28.1%, 27.9%, 25.5%, 24.1%, and 23.6% , respectively. In the case of engine emissions, R. Communis biodiesel blends provided an average decrease in hydrocarbon (HC), Carbon-monoxide (CO) and carbon dioxide (CO2) associated with base diesel. Nevertheless, R. Communis biodiesel blends discharged high stages of nitrogen oxide (NOx) compares to base diesel. Base diesel, D10, D20, D30, D40, D50, and D100 had UBHC emissions of 45 ppm, 40 ppm, 44 ppm, 46 ppm, 41 ppm, and 43 ppm, respectively. The reduction in CO emissions for D10, D20, D30, D40, D50 and D100 are 0.13%, 0.14%, 0.17%, 0.18% and 0.21% respectively. The dissimilarity in NOx attentiveness within brake powers for D10, D20, D30, D40, and D50 and base diesel are 50-ppm, 100 ppm, 150 ppm, 250 ppm, 350 ppm, and 500 ppm, respectively. The dissimilarity of CO2 emanation with reverence to break powers for the base-diesel, D10, D20, D30, D40, D50, and D100 are 4.8%, 4.9%, 4.8%, 4.56%, 4.9% and 5.1%, respectively. The present research provides a way for renewable petrol blends to substitute diesel for powering diesel engines in that way dropping the reliance on fossil fuels.