ABO3 and A1-xCxB1-yDy(O1-zEz)3: review of experimental optimisation of thin film perovskites by high-throughput evaporative physical vapour deposition.

The development of functional perovskites for future technologies can be achieved though the combinatorial synthetic method of evaporative physical vapour deposition (HT-ePVD) which provides a direct low temperature route to anion stoichiometric materials. When combined with the ability to control and vary precisely the composition of thin film libraries of materials, high-throughput methods of screening and characterisation provides a rapid experimental determination of the structure/function relationship. This review of the use of HT-ePVD shows that controlled cationic substitutions in A and/or B sites can easily be explored, as can the effect of anionic substitution. This is exemplified in using this approach for a wide range of perovskite systems, where the tuning of the functional properties through cation substitution has application in a broad range of technologies.

High-Throughput Synthesis and Characterization of Eu Doped Ba xSr2- xSiO4 Thin Film Phosphors.

High-throughput techniques have been employed for the synthesis and characterization of thin film phosphors of Eu-doped Ba xSr2- xSiO4. Direct synthesis from evaporation of the constituent elements under a flux of atomic oxygen on a sapphire substrate at 850 °C was used to directly produce thin film libraries (415 nm thickness) of the crystalline orthosilicate phase with the desired compositional variation (0.24 > x > 1.86). The orthosilicate phase could be synthesized as a pure, or predominantly pure, phase. Annealing the as synthesized library in a reducing atmosphere resulted in the reduction of the Eu while retaining the orthosilicate phase, and resulted in a materials thin film library where fluorescence excited by blue light (450 nm) was observable by the naked eye. Parallel screening of the fluorescence from the combinatorial libraries of Eu doped Ba xSr2- xSiO4 has been implemented by imaging the fluorescent radiation over the library using a monochrome digital camera using a series of color filters. Informatics tools have been developed to allow the 1931 CIE color coordinates and the relative quantum efficiencies of the materials library to be rapidly assessed and mapped against composition, crystal structure and phase purity. The range of compositions gave values of CIE x between 0.17 and 0.52 and CIE y between 0.48 and 0.69 with relative efficiencies in the range 2.0 × 10-4-7.6 × 10-4. Good agreement was obtained between the thin film phosphors and the fluorescence characteristics of a number of corresponding bulk phosphor powders. The thermal quenching of fluorescence in the thin film libraries was also measured in the temperature range 25-130 °C: The phase purity of the thin film was found to significantly influence both the relative quantum efficiency and the thermal quenching of the fluorescence.

Synthesis and Screening of Phase Change Chalcogenide Thin Film Materials for Data Storage.

A combinatorial synthetic methodology based on evaporation sources under an ultrahigh vacuum has been used to directly synthesize compositional gradient thin film libraries of the amorphous phases of GeSbTe alloys at room temperature over a wide compositional range. An optical screen is described that allows rapid parallel mapping of the amorphous-to-crystalline phase transition temperature and optical contrast associated with the phase change on such libraries. The results are shown to be consistent with the literature for compositions where published data are available along the Sb2Te3-GeTe tie line. The results reveal a minimum in the crystallization temperature along the Sb2Te3-Ge2Te3 tie line, and the method is able to resolve subsequent cubic-to-hexagonal phase transitions in the GST crystalline phase. HT-XRD has been used to map the phases at sequentially higher temperatures, and the results are reconciled with the literature and trends in crystallization temperatures. The results clearly delineate compositions that crystallize to pure GST phases and those that cocrystallize Te. High-throughput measurement of the resistivity of the amorphous and crystalline phases has allowed the compositional and structural correlation of the resistivity contrast associated with the amorphous-to-crystalline transition, which range from 5-to-8 orders of magnitude for the compositions investigated. The results are discussed in terms of the compromises in the selection of these materials for phase change memory applications and the potential for further exploration through more detailed secondary screening of doped GST or similar classes of phase change materials designed for the demands of future memory devices.

High-throughput synthesis and screening of hydrogen-storage alloys.

Libraries of mixed-metal hydride materials are synthesized on a silicon microfabricated array of "hot-plate" MEMS devices, which allow high-throughput screening using temperature programmed desorption and infrared thermography. The heating plate of the MEMS device is a membrane with low heat capacity, allowing fast and localized temperature control and the extraction of calorimetric data from thermography. The combination of the synthetic method and screening chip allows a fast determination of the desorption temperature and hydrogen content of the materials. Mixed metal hydrides are synthesized directly. The potential of the method is exemplified by presenting results for the sorption properties of Mg xNi 1- x hydride thin-film materials. The results are consistent with the literature, showing the highest hydrogen capacity and desorption temperature for the MgH 2 phase in Mg-rich compositions and the promotion of a lower temperature desorption from the Mg 2NiH 4 phase, with a concomitant reduction in hydrogen capacity.

A combinatorial approach to the study of particle size effects on supported electrocatalysts: oxygen reduction on gold.

A novel high-throughput technique has been developed for the investigation of the influence of supported metal particle size and the support on electrocatalytic activity. Arrays with a gradation of catalyst particle sizes are fabricated in a physical vapor deposition system that also allows selection of the support material. Simultaneous electrochemical measurements at all electrodes in the array, together with determination of the actual particle size distribution on each of the electrodes by transmission electron microscopy (TEM), then allows rapid determination of the activity as a function of catalyst center size. The procedure is illustrated using data for the reduction of oxygen on gold nanoparticles supported on both substoichiometric titanium dioxide (TiO(x)()) and carbon and the conclusions are verified using voltammetry at rotating disk electrodes. Gold centers with diameters in the range 1.4-6.3 nm were investigated and it is demonstrated that, with both supports, the catalytic activity for oxygen reduction decays rapidly for particle sizes below 3.0 nm. This may be observed as a decrease in current at constant potential or an increase in the overpotential for oxygen reduction.

Combinatorial approach to the study of particle size effects in electrocatalysis: synthesis of supported gold nanoparticles.

A high-throughput method for physical vapor deposition has been applied to the synthesis of libraries of supported gold particles on amorphous substoichiometric TiO(x)() and carbon supports. The TiO(x)() substrate stoichiometry can be varied or kept constant across a supporting sample, and subsequent deposition of particle sizes on supports are controlled through the nucleation and growth process. TEM measurements indicate nucleation and growth of Au particles takes place, with the smallest particles initially observed at 1.4 nm with a maximum density of 5.5 x 10(12) cm(-2) on titania, and 2.6 nm with concomitantly lower density on carbon. The 1.4-nm particles on titania exhibit a binding energy shift in the Au(4f) core level of 0.3 eV from bulk gold, and the shift is approximately 0.1 eV by the time particles grow to a mean size of 2.5 nm. These shifts are associated with final state effects, and the supported gold particles are metallic and appear to be relatively stable in air. When combined with appropriate substrates and screening techniques, this method provides a highly controllable method for the high-throughput synthesis of model supported catalyst.

High-throughput synthesis and screening of ternary metal alloys for electrocatalysis.

We report the application of a new method for the high-throughput synthesis and screening of thin film materials and its application to the discovery of electrocatalysts. Results are presented for the PtPdAu ternary alloy system with respect to activity for oxygen reduction. The results reveal an enhancement in activity for a range of PtPd alloy compositions over either of the pure elements. An optimum composition range of ternary alloys with significant activity was also identified. A correlation was also investigated between the surface reduction potential and the activity for oxygen reduction in both binary and ternary alloys. The results demonstrate the potential of the methodology for the discovery and optimization of electrocatalysts for a wide range of applications.

Physical vapor deposition method for the high-throughput synthesis of solid-state material libraries.

A method that combines co-evaporation of pure elements from multiple finite-size sources on temperature-controlled substrates with independently controlled source shutters has been used for the synthesis of solid-state material combinatorial libraries. The source shutters are positioned to achieve a controlled gradient of the deposited elements across the substrate and are fixed during the course of deposition. Choice of the shutter position and the rate of deposition for each source allow the direct synthesis of continuous and controlled materials of varying composition. There are significant advantages of the method over alternatives which rely on sequential deposition and subsequent heat treatment to produce thin film materials. The parameters governing the creation of gradients have been identified and defined. Simulations and experimental data have been compared in the case of a single source. Results are presented for the synthesis of a ternary alloy library to demonstrate the methodology.

Combinatorial electrochemical screening of fuel cell electrocatalysts.

Combinatorial methods have been applied to the preparation and screening of fuel cell electrocatalysts. Hardware and software have been developed for fast sequential measurements of cyclic voltammetric and steady-state currents in 64-element half-cell arrays. The arrays were designed for the screening of high-surface-area supported electrocatalysts. Analysis software developed allowed the semiautomated processing of the large quantities of data, applying filters that defined figures of merit relevant to fuel cell catalyst activity and tolerance. Results are presented on the screening of carbon-supported platinum catalysts of varying platinum metal loading on carbon (and thus, particle size) in order to demonstrate the speed and sensitivity of the screening methodology. CO electro-oxidation, oxygen reduction, and methanol oxidation on a series of such catalysts reveal clear trends in characteristics and activities. Catalysts with smaller particle sizes reveal structure in the CO stripping voltammetry that can be associated with edge sites in addition to the closely packed planes, and this is concomitantly reduced as particle size is increased. Specific activity for steady-state methanol oxidation and oxygen reduction at room temperature in H(2)SO(4) electrolyte is found to be a maximum for the largest particle sizes, in agreement with the literature. These trends in activity are significantly smaller than the differences in activities of promoted platinum-based alloy catalysts for the same reaction.

A micromachined calorimetric gas sensor: an application of electrodeposited nanostructured palladium for the detection of combustible gases.

Palladium films with regular nanoarchitectures were electrochemically deposited from the hexagonal (H1) lyotropic liquid crystalline phase of the nonionic surfactant octaethyleneglycol monohexadecyl ether (C16EO8) onto micromachined silicon hotplate structures. The H1-e Pd films were shown to have high surface areas (approximately 28 m2 g(-1)) and to act as effective and stable catalysts for the detection of methane in air on heating to 500 degrees C. The response of the H1-e Pd-coated planar pellistors was found to be linearly proportional to the concentration of methane between 0 and 2.5% in air with a detection limit below 0.125%. Our results show that the electrochemical deposition of nanostructured metal films offers a promising approach to the fabrication of micromachined calorimetric gas sensors for combustible gases.