Development of a bacterial bioassay for atrazine and cyanuric acid detection.

The s-triazine herbicides are compounds which can disseminate into soils and water. Due to their toxic effects on living organisms, their concentrations in drinking water are legislated by WHO recommendations. Here we have developed for the first time, to the best of our knowledge, an alternative method for physicochemical quantification using two bioluminescent bacterial biosensors: E. coli SM003 for cyanuric acid detection and E. coli SM004 for both atrazine and cyanuric acid detection. The concentration of cyanuric acid detection for E. coli SM003 ranges from 7.83 µM to 2.89 mM, and for E. coli SM004 ranges from 0.22 to 15 µM. Moreover, atrazine detection by E. coli SM004 ranges from 1.08 to 15 µM. According to WHO recommendations, the cyanuric acid detection range is sensitive enough to discriminate between polluted and drinking water. Nevertheless, the detection of atrazine by E. coli SM004 is only applicable for high concentrations of contaminants.

Identification of key factors in Accelerated Low Water Corrosion through experimental simulation of tidal conditions: influence of stimulated indigenous microbiota.

Biotic and abiotic factors favoring Accelerated Low Water Corrosion (ALWC) on harbor steel structures remain unclear warranting their study under controlled experimental tidal conditions. Initial stimulation of marine microbial consortia by a pulse of organic matter resulted in localized corrosion and the highest corrosion rates (up to 12-times higher than non-stimulated conditions) in the low water zone, persisting after nine months exposure to natural seawater. Correlations between corrosion severity and the abundance and composition of metabolically active sulfate-reducing bacteria (SRB) indicated the importance and persistence of specific bacterial populations in accelerated corrosion. One phylotype related to the electrogenic SRB Desulfopila corrodens appeared as the major causative agent of the accelerated corrosion. The similarity of bacterial populations related to sulfur and iron cycles, mineral and tuberculation with those identified in ALWC support the relevance of experimental simulation of tidal conditions in the management of steel corrosion exposed to harbor environments.

Sulfate-reducing bacteria inhabiting natural corrosion deposits from marine steel structures.

In the present study, investigations were conducted on natural corrosion deposits to better understand the role of sulfate-reducing bacteria (SRB) in the accelerated corrosion process of carbon steel sheet piles in port environments. We describe the abundance and diversity of total and metabolically active SRB within five natural corrosion deposits located within tidal or low water zone and showing either normal or accelerated corrosion. By using molecular techniques, such as quantitative real-time polymerase chain reaction, denaturing gel gradient electrophoresis, and sequence cloning based on 16S rRNA, dsrB genes, and their transcripts, we demonstrated a clear distinction between SRB population structure inhabiting normal or accelerated low-water corrosion deposits. Although SRB were present in both normal and accelerated low-water corrosion deposits, they dominated and were exclusively active in the inner and intermediate layers of accelerated corrosion deposits. We also highlighted that some of these SRB populations are specific to the accelerated low-water corrosion deposit environment in which they probably play a dominant role in the sulfured corrosion product enrichment.

Evaluation and optimization of nucleic acid extraction methods for the molecular analysis of bacterial communities associated with corroded carbon steel.

Different DNA and RNA extraction approaches were evaluated and protocols optimized on in situ corrosion products from carbon steel in marine environments. Protocols adapted from the PowerSoil DNA/RNA Isolation methods resulted in the best nucleic acid (NA) extraction performances (ie combining high NA yield, quality, purity, representativeness of microbial community and processing time efficiency). The PowerSoil RNA Isolation Kit was the only method which resulted in amplifiable RNA of good quality (ie intact 16S/23S rRNA). Sample homogenization and hot chemical (SDS) cell lysis combined with mechanical (bead-beating) lysis in presence of a DNA competitor (skim milk) contributed to improving substantially (around 23 times) the DNA yield of the PowerSoil DNA Isolation Kit. Apart from presenting NA extraction strategies for optimizing extraction parameters with corrosion samples from carbon steel, this study proposes DNA and RNA extraction procedures suited for comparative molecular analysis of total and active fractions of bacterial communities associated with carbon steel corrosion events, thereby contributing to improved MIC diagnosis and control.

A new bioassay for the inspection and identification of TBT-containing antifouling paint.

Since the 1960s tributyl (TBT)-based antifouling paints are widely applied to protect ship's hulls from biofouling. Due to its high toxicity to aquatic ecosystem most of the countries (28 nations in 2008) signed the AFS convention to control the use of harmful antifouling systems on ships. Nevertheless there is currently no simple method to control the presence of organotin in paint. In this study, we propose a bioassay based on the use of a recombinant bioluminescent bacteria to detect directly in paint the presence of TBT. We also propose a simple device as an inspection system to control the absence of organotin in the ship's hull paint. The presence of organotin could be revealed in less than three hours.

The ygaVP genes of Escherichia coli form a tributyltin-inducible operon.

A tributyltin (TBT) luxAB transcriptional fusion in Escherichia coli revealed that a TBT-activated promoter is located upstream of two cotranscribed orphan genes, ygaV and ygaP. We demonstrate that transcription from the promoter upstream of ygaVP is constitutive in a ygaVP mutant, suggesting that YgaV is an autoregulated, TBT-inducible repressor.

Pore selectivity analysis of an aquaglyceroporin by stopped-flow spectrophotometry on bacterial cell suspensions.

Background information. Transport of water and small neutral solutes across plasma membranes is facilitated by AQP (aquaporin) and aquaglyceroporin channels, which belong to the MIP (major intrinsic protein) family. So far, more than 800 MIP proteins have been identified on the basis of sequence homology, but only less than 10% of them have been functionally characterized. In most studies, the channel properties of MIP proteins have been determined by using Xenopus oocyte swelling assays or stopped-flow spectrophotometry on proteoliposomes. As both methods sometimes present disadvantages, we developed an alternative method for analysing MIP function.Results. The kinetics of plasmolysis or deplasmolysis of Escherichia coli cells in suspension, in response to osmotic challenges, was analysed by stopped-flow spectrophotometry. Cytoplasmic volume variations were monitored either by GFP (green fluorescent protein) fluorescence quenching or by 90 degrees scattered light. The single exponential response to up-shocks in the impermeant solute mannitol was strongly accelerated when the cells expressed the native E. coli AQP AqpZ (rate constant 37.24 versus 3.05 s(-1) for control cells). The responses to hyperosmotic shocks realized with glycerol were biphasic. First, a light-scattering increase corresponded to cell plasmolysis. Secondly, deplasmolysis occurred when glycerol entered into the cell. Both phases were accelerated when the aquaglyceroporin GlpF was present in cell membranes. We concluded that the behaviour of MIP-expressing bacteria in the stopped-flow system was qualitatively identical with that reported for MIP-expressing oocytes or MIP-containing proteoliposomes. We then used this system to analyse the effects of mutations in the pore constriction of Gla(Llac), the aquaglyceroporin from Lactococcus lactis. In the present study, we show that Gla(Llac) loses its ability to transport glycerol but retains its ability to transport water when Val(223) was replaced by a histidine, the residue at the equivalent position in strict AQPs.Conclusions. These results show that stopped-flow spectrophotometry performed on E. coli cell suspensions is a useful experimental system to analyse the selectivity of wild-type or mutant MIP proteins and that a bifunctional aquaglyceroporin switches to an AQP by a single amino acid mutation in the pore constriction.

MIPDB: a relational database dedicated to MIP family proteins.

BACKGROUND INFORMATION: The MIPs (major intrinsic proteins) constitute a large family of membrane proteins that facilitate the passive transport of water and small neutral solutes across cell membranes. Since water is the most abundant molecule in all living organisms, the discovery of selective water-transporting channels called AQPs (aquaporins) has led to new knowledge on both the physiological and molecular mechanisms of membrane permeability. The MIPs are identified in Archaea, Bacteria and Eukaryota, and the rapid accumulation of new sequences in the database provides an opportunity for large-scale analysis, to identify functional and/or structural signatures or to infer evolutionary relationships. To help perform such an analysis, we have developed MIPDB (database for MIP proteins), a relational database dedicated to members of the MIP family. RESULTS: MIPDB is a motif-oriented database that integrates data on 785 MIP proteins from more than 200 organisms and contains 230 distinct sequence motifs. MIPDB proposes the classification of MIP proteins into three functional subgroups: AQPs, glycerol-uptake facilitators and aquaglyceroporins. Plant MIPs are classified into three specific subgroups according to their subcellular distribution in the plasma membrane, tonoplast or the symbiosome membrane. Some motifs of the database are highly selective and can be used to predict the transport function or subcellular localization of unknown MIP proteins. CONCLUSIONS: MIPDB offers a user-friendly and intuitive interface for a rapid and easy access to MIP resources and to sequence analysis tools. MIPDB is a web application, publicly accessible at http://idefix.univ-rennes1.fr:8080/Prot/index.html.