Hybrid nickel-free graphene/porphyrin rings for photodegradation of emerging pollutants in water.

A novel hybrid photoactive material based on graphene foam (G) coupled with porphyrin-based polymers (Porph rings) was formulated by using a time-saving procedure to remove nickel from the final device. Specifically, Porph rings were spin coated onto the G platform with the double function of a visible-light photocatalyst and protective agent during nickel etching. The characterization of G-Porph rings was assessed by Scanning Electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL). The novel material showed photocatalytic ability in degrading different classes of pollutants such as the herbicide 2,4 dichlorophenoxyacetic acid (2,4-D), polyethylene glycol (PEG) as an ingredient of care and health products, and also the methylene blue (MB) dye. UV-Vis spectroscopy, total organic carbon (TOC) and soft mass spectrometry techniques were used to monitor the photocatalytic process. The best performance in terms of photocatalytic efficiency was exhibited versus PEG and MB degradation. Furthermore, to determine the individual contribution of Reactive Oxygen Species (ROS) produced, free radical and hole scavenging tests were also carried out. Finally, a detailed map of the photocatalytic degradation mechanisms was proposed, reporting also the calculation of Porph rings' Highest Occupied Molecular Orbital (HOMO) and Lowest Occupied Molecular Orbital (LUMO) energy level values.

Cavitand-Decorated Silicon Columnar Nanostructures for the Surface Recognition of Volatile Nitroaromatic Compounds.

Nanocolumnar Si substrates (porous silicon (PSi)) have been functionalized with a quinoxaline-bridged (EtQxBox) cavitand in which the quinoxaline moieties are bonded to each other through four ethylendioxy bridges at the upper rim of the cavity. The receptor, which is known to selectively complex aromatic volatile organic compounds (VOCs) even in the presence of aliphatic compounds, has been covalently anchored to PSi. The larger surface area of PSi, compared to that of flat substrates, allowed one to study the recognition process of the surface-grafted receptors through different techniques: Fourier-transform infrared spectroscopy, thermal desorption, and X-ray photoelectron spectroscopy. The experiments proved that surface-grafted cavitands retain the recognition capability toward aromatic VOCs. In addition, the affinities of EtQxBox for various aromatic compounds (i.e., benzene, toluene, nitrobenzene, and p-nitrotoluene) have been studied combining density functional theory computations and thermal desorption experiments. Computational data based on the crystal structures of the complexes indicate that this cavitand possesses a higher affinity toward aromatic nitro-compounds compared to benzene and toluene, making this receptor of particular interest for the detection of explosive taggants. The results of computational studies have been validated also for the surface-grafted receptor through competitive recognition experiments. These experiments showed that EtQxBox-functionalized PSi can recognize nitrobenzene in the presence of a significant excess of aromatic vapors such as benzene (1:300) or toluene (1:100).

Self-Assembly of TbPc2 Single-Molecule Magnets on Surface through Multiple Hydrogen Bonding.

The complexation between 2-ureido-4[1H]-pyrimidinone (UPy) and 2,7-diamido-1,8-naphthyridine (NaPy) is used to promote the mild chemisorption of a UPy-functionalized terbium(III) double decker system on a silicon surface. The adopted strategy allows the single-molecule magnet behavior of the system to be maintained unaltered on the surface.

The quest towards epitaxial BaMgF4 thin films: exploring MOCVD as a chemical scalable approach for the deposition of complex metal fluoride films.

Conventional and Pulsed Liquid Injection MOCVD processes (C-MOCVD and PLI-MOCVD) have been explored as synthetic routes for the growth of BaMgF4 on Si (100) and single crystalline SrTiO3 (100) substrates. For the two applied approaches, the volatile, thermally stable ß-diketonate complexes Ba(hfa)2tetraglyme and Mg(hfa)2(diglyme)2(H2O)2 have been used as single precursors (C-MOCVD) or as a solution multimetal source (PLI-MOCVD). Structural characterization through X-ray diffraction (XRD) measurements and transmission electron microscopy (TEM) analyses confirmed the formation of epitaxial BaMgF4 films on SrTiO3 substrates. Energy dispersive X-ray (EDX) analyses have been used to confirm composition and purity of deposited films. The impact of process parameters on film properties has been addressed, highlighting the strong influence of precursor ratio, deposition temperature and oxygen partial pressure on composition, microstructure and morphology of the films. Both methods appear well suited for the growth of the BaMgF4 phase, but while PLI-MOCVD yields a more straightforward control of the precursor composition that reflects on film stoichiometry, C-MOCVD provides easier control of the degree of texturing as a function of temperature.

Metal-Organic Chemical Vapor Deposition (MOCVD) Synthesis of Heteroepitaxial Pr0.7Ca0.3MnO3 Films: Effects of Processing Conditions on Structural/Morphological and Functional Properties.

Calcium-doped praseodymium manganite films (Pr0.7Ca0.3MnO3, PCMO) were prepared by metal-organic chemical vapor deposition (MOCVD) on SrTiO3 (001) and SrTiO3 (110) single-crystal substrates. Structural characterization through X-ray diffraction (XRD) measurements and transmission electron microscopy (TEM) analyses confirmed the formation of epitaxial PCMO phase films. Energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) characterization was used to confirm lateral and vertical composition and the purity of the deposited films. Magnetic measurements, obtained in zero-field-cooling (ZFC) and field-cooling (FC) modes, provided evidence of the presence of a ferromagnetic (FM) transition temperature, which was correlated to the transport properties of the film. The functional properties of the deposited films, combined with the structural and chemical characterization collected data, indicate that the MOCVD approach represents a suitable route for the growth of pure, good quality PCMO for the fabrication of novel spintronic devices.

Magnetic behaviour of TbPc2 single-molecule magnets chemically grafted on silicon surface.

Single-molecule magnets (SMMs) are among the most promising molecular systems for the development of novel molecular electronics based on spin transport. Going beyond investigations focused on physisorbed SMMs, in this work the robust grafting of terbium(III) bis(phthalocyaninato) complexes to a silicon surface from a diluted solution is achieved by rational chemical design yielding the formation of a partially oriented monolayer on the conducting substrate. Here by exploiting the surface sensitivity of X-ray circular magnetic dichroism, we evidence an enhancement of the magnetic bistability of this SMM, in contrast to the dramatic reduction of the magnetic hysteresis that characterizes monolayer deposits evaporated on noble and ferromagnetic metals. Photoelectron spectroscopy investigations and density functional theory analysis suggest a non-innocent role played by the silicon substrate, evidencing the potentiality of this approach for robust integration of bistable magnetic molecules in electronic devices.

Cavitand-grafted silicon microcantilevers as a universal probe for illicit and designer drugs in water.

The direct, clean, and unbiased transduction of molecular recognition into a readable and reproducible response is the biggest challenge associated to the use of synthetic receptors in sensing. All possible solutions demand the mastering of molecular recognition at the solid-liquid interface as prerequisite. The socially relevant issue of screening amine-based illicit and designer drugs is addressed by nanomechanical recognition at the silicon-water interface. The methylamino moieties of different drugs are all first recognized by a single cavitand receptor through a synergistic set of weak interactions. The peculiar recognition ability of the cavitand is then transferred with high fidelity and robustness on silicon microcantilevers and harnessed to realize a nanomechanical device for label-free detection of these drugs in water.

Enantioselective extraction mediated by a chiral cavitand-salen covalently assembled on a porous silicon surface.

A chiral organic-inorganic hybrid material, based on a porous silicon surface functionalized with a chiral cavitand, was designed and synthesized. The affinity of this device in water toward a bromine-marked alkyl-ammonium salt has been evaluated using XPS detection. UV and CD measurements highlight the enantioselective extraction from a racemic mixture in water of the S-enantiomer of the selected guest (ee ≥ 80%).

In situ metalation of free base phthalocyanine covalently bonded to silicon surfaces.

Free 4-undecenoxyphthalocyanine molecules were covalently bonded to Si(100) and porous silicon through thermic hydrosilylation of the terminal double bonds of the undecenyl chains. The success of the anchoring strategy on both surfaces was demonstrated by the combination of X-ray photoelectron spectroscopy with control experiments performed adopting the commercially available 2,3,9,10,16,17,23,24-octakis(octyloxy)-29H,31H-phthalocyanine, which is not suited for silicon anchoring. Moreover, the study of the shape of the XPS N 1s band gave relevant information on the interactions occurring between the anchored molecules and the substrates. The spectra suggest that the phthalocyanine ring interacts significantly with the flat Si surface, whilst ring-surface interactions are less relevant on porous Si. The surface-bonded molecules were then metalated in situ with Co by using wet chemistry. The efficiency of the metalation process was evaluated by XPS measurements and, in particular, on porous silicon, the complexation of cobalt was confirmed by the disappearance in the FTIR spectra of the band at 3290 cm(-1) due to -NH stretches. Finally, XPS results revealed that the different surface-phthalocyanine interactions observed for flat and porous substrates affect the efficiency of the in situ metalation process.

Lack of association between maternal periodontal status and adverse pregnancy outcomes: a multicentric epidemiologic study.

OBJECTIVE(S): The aim of this study was to explore the relationship between periodontal health and pregnancy outcomes in a large cohort of Italian postpartum women. METHODS: 750 postpartum women were enrolled in a case-control study within 5 days from delivery at three Italian obstetric clinics. Cases were defined as those mothers who delivered an infant weighing under 2500 g (LBW) and/or had premature delivery and/or delivered small for gestational age newborns (SGA) and/or experienced preeclampsia/pregnancy induced hypertension (PE/PIH) or preterm premature rupture of membranes (pPROM) during pregnancy. All women received comprehensive oral and dental examination. Associations between adverse pregnancy outcome and exposures of interest were evaluated by the use of multivariate logistic regression models to estimate odds ratios (ORs) and 95% confidence intervals (CIs). RESULTS: There was no significant difference between cases and controls with respect to country of birth, age, place of residence, educational achievement, smoking, and periodontal status. By definition, infant birth weight [2,750 g (IQR = 2,300-3,200 g) and 3,275, (IQR = 3,010-3,538 g) p < 0.001, respectively] and gestational age at delivery [259 days (IQR = 245-273) and 273 days (IQR = 266-280), p < 0.01, respectively] were significantly lower in cases than in controls. In multivariate analyses, a borderline association was found between poor obstetric outcomes and current smokers (OR: 1.5; 95% CI: 0.1-2.5). Finally, after adjusting for smoking status neither country of birth, nor age or place of residence or education or periodontitis were associated with a significantly increased risk of adverse pregnancy outcome. CONCLUSION(S): Our data failed to demonstrate the association between periodontitis and an adverse pregnancy outcome such as preterm birth, low birth weight, preeclampsia, intrauterine growth restriction, and premature rupture of membranes.

Exclusive recognition of sarcosine in water and urine by a cavitand-functionalized silicon surface.

A supramolecular approach for the specific detection of sarcosine, recently linked to the occurrence of aggressive prostate cancer forms, has been developed. A hybrid active surface was prepared by the covalent anchoring on Si substrates of a tetraphosphonate cavitand as supramolecular receptor and it was proven able to recognize sarcosine from its nonmethylated precursor, glycine, in water and urine. The entire complexation process has been investigated in the solid state, in solution, and at the solid-liquid interface to determine and weight all the factors responsible of the observed specificity. The final outcome is a Si-based active surface capable of binding exclusively sarcosine. The complete selectivity of the cavitand-decorated surface under these stringent conditions represents a critical step forward in the use of these materials for the specific detection of sarcosine and related metabolites in biological fluids.

Cavitand-functionalized porous silicon as an active surface for organophosphorus vapor detection.

This paper reports on the preparation of a porous silicon-based material covalently functionalized with cavitand receptors suited for the detection of organophosphorus vapors. Two different isomeric cavitands, both containing one acid group at the upper rim, specifically designed for covalent anchoring on silicon, were grafted on H-terminated porous silicon (PSi) by thermal hydrosilylation. The covalently functionalized surfaces and their complexation properties were characterized by combining different analytical techniques, namely X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and mass spectroscopy analysis coupled with thermal desorption experiments. Complexation experiments were performed by exposing both active surfaces and a control surface consisting of PSi functionalized with a structurally similar but inactive methylene-bridged cavitand (MeCav) to dimethyl methylphosphonate (DMMP) vapors. Comparison between active and inactive surfaces demonstrated the recognition properties of the new surfaces. Finally, the nature of the involved interactions, the energetic differences between active and inactive surfaces toward DMMP complexation, and the comparison with a true nerve gas agent (sarin) were studied by DFT modeling. The results revealed the successful grafting reaction, the specific host-guest interactions of the PSi-bonded receptors, and the reversibility of the guest complexation.

BiFeO3 films doped in the A or B sites: effects on the structural and morphological properties.

Metal-Organic Chemical Vapor Deposition (MOCVD) has been applied to the fabrication of BiFeO3 films undoped and doped with Ba or Ti on SrTiO3 (100) and YSZ (100) substrates. The films have been deposited using a multi-metal source, consisting of the Bi(phenyl)3, Fe(tmhd)3 and Ba(hfa)2 tetraglyme or Ti(tmhd)2(O-iPr)2 (phenyl = -C6H5, H-tmhd = 2,2,6,6-tetramethyl-3,5-heptandione; O-iPr = iso-propoxide; H-hfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedione; tetraglyme = CH3O(CH2CH2O)4CH3) precursor mixture. The structural and morphological characterization of films has been carried out using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). Chemical compositional studies have been performed by energy dispersive X-ray (EDX) analysis. Structural and morphological characterizations point to the formation of homogeneous and flat surfaces for both undoped and doped BiFeO3 films.

Molecular recognition of halogen-tagged aromatic VOCs at the air-silicon interface.

Selective and reversible complexation of halogen-tagged aromatic VOCs by a quinoxaline cavitand-decorated Si surface is demonstrated. The specific host-guest interactions of the Si-bonded receptors are proved to be responsible of the surface recognition properties, while extracavity non specific adsorptions are totally suppressed compared to the bulk material.

Molecular recognition on a cavitand-functionalized silicon surface.

A Si(100) surface featuring molecular recognition properties was obtained by covalent functionalization with a tetraphosphonate cavitand (Tiiii), able to complex positively charged species. Tiiii cavitand was grafted onto the Si by photochemical hydrosilylation together with 1-octene as a spatial spectator. The recognition properties of the Si-Tiiii surface were demonstrated through two independent analytical techniques, namely XPS and fluorescence spectroscopy, during the course of reversible complexation-guest exchange-decomplexation cycles with specifically designed ammonium and pyridinium salts. Control experiments employing a Si(100) surface functionalized with a structurally similar, but complexation inactive, tetrathiophosphonate cavitand (TSiiii) demonstrated no recognition events. This provides evidence for the complexation properties of the Si-Tiiii surface, ruling out the possibility of nonspecific interactions between the substrate and the guests. The residual Si-O(-) terminations on the surface replace the guests' original counterions, thus stabilizing the complex ion pairs. These results represent a further step toward the control of self-assembly of complex supramolecular architectures on surfaces.

Self-assembly of nanosize coordination cages on si(100) surfaces.

Bottom-up fabrication of 3D organic nanostructures on Si(100) surfaces has been achieved by a two-step procedure. Tetradentate cavitand 1 was grafted on the Si surface together with 1-octene (Oct) as a spatial spectator by photochemical hydrosilylation. Ligand exchange between grafted cavitand 1 and self-assembled homocage 2, derived from cavitand 5 bearing a fluorescence marker, led to the formation of coordination cages on Si(100). Formation, quantification, and distribution of the nanoscale molecular containers on a silicon surface was assessed by using three complementary analytical techniques (AFM, XPS, and fluorescence) and validated by control experiments on cavitand-free silicon surfaces. Interestingly, the fluorescence of pyrene at approximately 4 nm above the Si(100) surface can be clearly observed.

Effects of phytoestrogenic isoflavones from red clover (Trifolium pratense L.) on experimental osteoporosis.

The most common type of osteoporosis is bone loss associated with ovarian hormone deficiency at menopause. There is evidence that diets which contain high levels of phytoestrogenic isoflavones are associated with a low incidence of osteoporosis and menopausal symptoms. Plant extracts, which contain high levels of isoflavones, such as Red clover (Trifolium pratense L.), have been used to reduce menopausal symptoms. The objective of this study was to evaluate the preventive effects of Red clover total isoflavones on the progression of bone loss induced by estrogens deficiency (ovariectomy) in rats. Bilateral ovariectomy was performed on female Wistar rats. One week after the operation the rats were treated with an oral dose of 20 and 40 mg of total isoflavones daily for 14 weeks. The results from this study showed that the ovariectomy reduced bone mineral content, femoral weight, femoral density, mechanical strength of the tibia and increased the levels of bone specific alkaline phosphatase in the serum and the number of osteoclasts in the femur sections compared with sham operated controls. Treatment with isoflavones significantly increased bone mineral content, mechanical strength of the tibia, femoral weight, femoral density and prevented the rise of serum alkaline phosphatase levels. In addition, the treatment with isoflavones significantly reduced the number of osteoclasts compared with the ovariectomized control rats. These findings suggest that Red clover isoflavones are effective in reducing bone loss induced by ovariectomy, probably by reducing of the bone turnover via inhibition of bone resorption.

Grafting cavitands on the Si(100) surface.

Cavitand molecules having double bond terminated alkyl chains and different bridging groups at the upper rim have been grafted on H-terminated Si(100) surface via photochemical hydrosilylation of the double bonds. Pure and mixed monolayers have been obtained from mesitylene solutions of either pure cavitand or cavitand/1-octene mixtures. Angle resolved high-resolution X-ray photoelectron spectroscopy has been used as the main tool for the monolayer characterization. The cavitand decorated surface consists of Si-C bonded layers with the upper rim at the top of the layer. Grafting of pure cavitands leads to not-well-packed layers, which are not able to efficiently passivate the Si(100) surface. By contrast, monolayers obtained from cavitand/1-octene mixtures consist of well-packed layers since they prevent silicon oxidation after aging. AFM measurements showed that these monolayers have a structured topography, with objects protruding from the Si(100) surface with average heights compatible with the expected ones for cavitand molecules.

Self-assembled monolayers of dipolar nonlinear optical nickel(II) molecules on the Si(100) surface with nanoscale uniformity.

The synthesis and structure of a dipolar nonlinear optical bis(salicylaldiminato)Ni(II)-derivatized Schiff base complex chemisorbed on H-terminated Si(100) surfaces is reported. The existence of a monolayer of the derivatized complex chemisorbed on the Si(100) surface is unambiguously confirmed by high-resolution core-level XPS and AFM/SNOM analyses. The comparison between the optical SNOM images highlights the contribution of the monolayer to the local reflectivity of the sample. Angle-resolved XPS data indicate the presence of chlorine head atoms on the monolayer surface. Altogether, XPS and AFM/SNOM data suggest the formation of a nanoscale uniform, homogeneous, complete, ordered monolayer self-assembled on the Si(100) surface.

Density control of dodecamanganese clusters anchored on silicon(100).

A synthetic strategy to control the density of Mn12 clusters anchored on silicon(100) was investigated. Diluted monolayers suitable for Mn12 anchoring were prepared by Si-grafting mixtures of the methyl 10-undecylenoate precursor ligand with 1-decene spectator spacers. Different ratios of these mixtures were tested. The grafted surfaces were hydrolyzed to reveal the carboxylic groups available for the subsequent exchange with the [Mn12O12(OAc)16(H2O)4]4 H2O2 AcOH cluster. Modified surfaces were analyzed by attenuated total reflection (ATR)-FTIR spectroscopy, X-ray photoemission spectroscopy (XPS), and AFM imaging. Results of XPS and ATR-FTIR spectroscopy show that the surface mole ratio between grafted ester and decene is higher than in the source solution. The surface density of the Mn12 cluster is, in turn, strictly proportional to the ester mole fraction. Well-resolved and isolated clusters were observed by AFM, using a diluted ester/decene 1:1 solution.