In vitro and Ex vivo Assessments of the Compatibility of Fibrin Sealant with Antimicrobial Compounds.

Background: Fibrin sealants are used as antimicrobial-releasing carriers for preventing surgical site infections; however, it is important to determine the release kinetics and antimicrobial effects of drugs added to fibrin sealants and the effects of drugs on clot/clotting properties. Materials and Methods: The antimicrobial and antibiofilm activity of cefazolin, colistin, gentamicin, oxacillin, tobramycin, and silver nitrate released from fibrin sealant were characterized using in vitro and ex vivo assays against bacteria commonly found on the skin. The effects of antimicrobial agents on the physical structure of the fibrin sealant were assessed with scanning electron microscopy (SEM) and on the clotting rate and strength of fibrin clots using run-off tests and rheology. Results: Generally, antibiotic agents were released gradually from fibrin sealant and were stable after release, with antimicrobial effects evident up to three days. Cefazolin, gentamicin, and oxacillin prevented biofilm formation of Staphylococcus aureus in porcine skin explants; gentamicin and colistin prevented biofilm formation of Pseudomonas aeruginosa. Gentamicin, cefazolin, colistin, and tobramycin did not affect the structural integrity or viscoelastic properties of fibrin sealant; changes were observed with oxacillin (SEM) and particularly silver nitrate (SEM and rheology). No antimicrobial agents caused deterioration of clotting time (run-off tests). Conclusions: From the antimicrobial agents tested, gentamicin and cefazolin showed prolonged release from fibrin sealant, sustained antimicrobial activity, and biofilm prevention properties against Staphylococcus aureus; similar results were observed for gentamicin and colistin against Pseudomonas aeruginosa. For each of these findings, the physical structure of the fibrin sealant, clotting rate, and strength of fibrin clots were unaffected.

A comparative high-resolution physicochemical analysis of commercially available fibrin sealants: Impact of sealant osmolality on biological performance.

Fibrin sealants are well-established components of the surgical toolbox, especially in procedures that harbor a high risk of perioperative bleeding. Their widespread use as hemostats, sealants or tissue-adhesives in various surgical settings has shown that the choice of the appropriate sealant system affects the clinical outcome. While many studies have compared the hemostatic efficiency of fibrin sealants to that of other natural or synthetic sealants, there is still limited data on how subtle differences in fibrin sealant formulations relate to their biological performance. Here, we performed an in-depth physicochemical and biological characterization of the two most commonly used fibrin sealants in the US and Europe: TISSEEL™ ("FS") and VISTASEAL™/VERASEAL™ ("FS+Osm"). Our chemical analyses demonstrated differences between the two sealants, with lower fibrinogen concentrations and supraphysiological osmolality in the FS+Osm formulation. Rheological testing revealed FS clots have greater clot stiffness, which strongly correlated with network density. Ultrastructural analysis by scanning electron microscopy revealed differences between FS and FS+Osm fibrin networks, the latter characterized by a largely amorphous hydrogel structure in contrast to the physiological fibrillar network of FS. Cytocompatibility experiments with human fibroblasts seeded on FS and FS+Osm fibrin networks, or cultured in presence of sealant extracts, revealed that FS+Osm induced apoptosis, which was not observed with FS. Although differential sealant osmolality and amounts of fibrinogen, as well as the presence of Factor XIII or additives such as antifibrinolytics, may explain the mechanical and structural differences observed between the two fibrin sealants, none of these substances are known to cause apoptosis at the respective concentrations in the sealant formulation. We thus conclude that hyper osmolality in the FS+Osm formulation is the primary trigger of apoptosis-a mechanism that should be evaluated in more detail, as it may affect the cellular wound healing response in situ.

A Comparative Efficacy Evaluation of Recombinant Topical Thrombin (RECOTHROM®) With A Gelatin Sponge Carrier Versus Topical Oxidized Regenerated Cellulose (TABOTAMP®/SURGICEL®) In A Porcine Liver Bleeding Model.

PURPOSE: Topical hemostatic agents can be classified as active or passive. This study compared the hemostatic efficacy of an active agent, recombinant thrombin (RECOTHROM® [rT]) plus gelatin sponge carrier versus a passive agent, oxidized regenerated cellulose (TABOTAMP®/SURGICEL® [ORC]), in a porcine liver abrasion model. MATERIALS AND METHODS: Eight pigs were used, four of them were heparinized. A total of 80 liver lesions were created, 40 of them in heparinized pigs. Lesions were treated with rT plus gelatin sponge or ORC. Bleeding rate was quantified before treatment by applying pre-weighed gauze. Time to hemostasis was assessed visually for 10 minutes. RESULTS: Seven of the 80 lesions were excluded for having initial bleeding rates exceeding the target of 10 g/min. Sixteen and 20 lesions were treated with rT plus gelatin sponge and 19 and 18 lesions were treated with ORC, in non-heparinized and heparinized animals, respectively. Time to hemostasis (median [IQR]) was significantly shorter with rT plus gelatin sponge (30 [30,30] seconds) in heparinized and non-heparinized animals versus ORC in non-heparinized (180 [120,210] seconds) and heparinized animals (215 [135,345] seconds); P < 0.0001 for both comparisons. In heparinized animals, ORC took longer to achieve hemostasis, with treatment failure in 2/18 lesions. Time to hemostasis with ORC was longer for lesions in heparinized animals with initial bleeding rates of >5-10 g/min (285 [225,394] seconds) versus ≤5 g/min (175 [108,290] seconds). CONCLUSIONS: In this model, rT plus gelatin sponge carrier (active) was a more effective hemostat than ORC (passive) in both heparinized and non-heparinized animals.

An Efficacy Comparison of Two Hemostatic Agents in a Porcine Liver Bleeding Model: Gelatin/Thrombin Flowable Matrix versus Collagen/Thrombin Powder.

Purpose: Management of bleeding during surgery can be aided by the application of topical hemostatic agents. This study compared the hemostatic efficacy of a new powder agent containing collagen, chondroitin sulfate, and thrombin (PCCT) with a flowable gelatin-thrombin matrix with smooth particles (SmGM) in a porcine liver bleeding model. Materials and Methods: Lesions 4-6 mm deep and ∼10 mm in diameter were created in porcine livers and treated with either SmGM or PCCT. Bleeding rate and grade were quantified before and 3, 7, and 11 minutes after treatment. Results: Thirty-two lesions each were treated with SmGM or PCCT; the median (Q1, Q3) initial bleeding rate was comparable between the two groups (8.43 [6.18, 10.68] g/min and 7.15 [5.16, 9.63] g/min, respectively). The residual bleeding rate was significantly lower at all time-points post treatment for SmGM compared with PCCT (3 minutes: 0.14 [0.07, 0.21] versus 0.46 [0.20, 1.20] g/min, p < 0.0001; 7 minutes: 0.07 [0.04, 0.11] versus 0.12 [0.08, 0.39] g/min, p = 0.001; 11 minutes: 0.05 [0.03, 0.08] versus 0.07 [0.05, 0.12] g/min, p = 0.043). Bleeding grade at 3 minutes was also significantly lower for SmGM compared with PCCT (median [Q1, Q3] 0.0 [0.0, 0.0] versus 1.0 [1.0, 2.0], p < 0.0001). PCCT required reapplication in approximately one-third of applications due to insufficient hemostasis 4 minutes after initial application and showed a tendency to stick to the wet gauze during approximation. Conclusions: In this bleeding model, treatment with SmGM resulted in reduced blood loss, no need for reapplication and was easier to apply compared with PCCT.

Efficacy of Topical Hemostatic Agents: A Comparative Evaluation of Two Gelatin/Thrombin-Based Hemostatic Matrices in a Porcine Kidney Surgical Model.

Purpose: Topical hemostatic agents are an important means of controlling or preventing bleeding. This study was performed to compare gelatin-thrombin matrix with smooth particles (SmGM) versus gelatin-thrombin matrix with stellate particles (StGM) in a porcine kidney bleeding model. Materials and methods: In male pigs, reproducible lesions (diameter and depth ∼10 mm) were created in the renal cortex. Each lesion was treated topically using either SmGM or StGM. Blood loss was quantified before and 2, 5 and 10 minutes after treatment. Dry mass, ultrastructural and histologic analyses were also performed. Results: Thirty-two lesions were treated with SmGM and 32 with StGM; median initial bleeding rates were 27.6 and 29.1 mL/min, respectively. Two minutes post-application, SmGM was associated with significantly less bleeding than StGM (0.574 vs 0.920 mL/min; p < .0001). This difference stemmed principally from lesions with initial blood loss >29 mL/min, where bleeding rates at 2 minutes were ∼3-fold higher with StGM (1.636 vs 0.567 mL/min; p ≥ 0.040). Dry mass per unit volume of hemostatic agent was significantly higher with SmGM versus StGM. SmGM formed discrete, smooth particles, while StGM particles were stellate and tended to coalesce. Histologic analysis showed more solid mass, larger particles and less intervening space with SmGM versus StGM. Conclusions: In a severe, high-volume bleeding model, residual bleeding at 2 minutes was significantly lower with SmGM versus StGM, and SmGM showed greater consistency across bleeding intensities. These findings may be attributable to dry mass per unit volume and/or ultrastructural differences between the two agents.

Properties of collagen-based hemostatic patch compared to oxidized cellulose-based patch.

Two self-adhering hemostatic patches, based on either PEG-coated collagen (PCC) or PEG-coated oxidized cellulose (PCOC), are compared regarding to maximum burst pressure, mechanical stability, and swelling. In addition, the induction of tissue adhesions by the materials was assessed in a rabbit liver abrasion model. Both materials showed comparable sealing efficacy in a burst pressure test (37 ± 16 vs. 35 ± 8 mmHg, P = 0.730). After incubation in human plasma, PCC retained its mechanical properties over the test period of 8 h, while PCOC showed faster degradation after the 2 h time-point. The degradation led to a significantly decreased force at break (minimum force at break 0.55 N during 8 h for PCC, 0.27 N for PCOC; p < 0.001). Further, PCC allowed significantly higher deformation before break (52% after 4 h and 50% after 8 h for PCC, 18% after 4 h and 23% after 8 h for PCOC; p = 0.003 and p < 0.001 for 4 h and 8 h, respectively) and showed less swelling in human plasma (maximum increase in thickness: ~20% PCC, ~100% PCOC). Faster degradation of PCOC was visible macroscopically and histologically in vivo after 14 days. PCC showed visible structural residues with little cellular infiltration while strong infiltration with no remaining structural material was seen with PCOC. In vivo, a higher incidence of adhesion formation after PCOC application was detected. In conclusion, PCC has more reliable mechanical properties, reduced swelling, and less adhesion formation than PCOC. PCC may offer greater clinical benefit for surgeons in procedures that have potential risk for body fluid leakage or that require prolonged mechanical stability.

Safety and Efficacy of a Novel, Self-Adhering Dural Substitute in a Canine Supratentorial Durotomy Model.

BACKGROUND: Cerebrospinal fluid (CSF) leaks increase postoperative risk for complication, likelihood of reoperation, and costs. OBJECTIVE: To investigate a novel, self-adhering polyethylene glycol-coated collagen pad (PCC) as a dural substitute relative to Duragen XS (DGX; Integra LifeSciences Corporation, Plainsboro, New Jersey) and as a dural sealant relative to Tachosil (Takeda Austria GmbH, Linz, Austria), a fibrinogen and thrombin-coated collagen pad (FTC). METHODS: A canine supratentorial durotomy surgical model was used to investigate the safety and efficacy of PCC. For safety, 4 animals were bilaterally treated with DGX or PCC and recovered for 1, 8, or 16 wk; total 24 animals. Each animal underwent physical and neurological examinations weekly and 16-wk animals underwent a magnetic resonance imaging (MRI) examination at each time point. For efficacy, 9 animals were unilaterally treated with FTC or PCC and underwent a burst pressure test intraoperatively or 14 d postoperatively; total 36 animals. RESULTS: In the safety study, no abnormal clinical signs or changes were noted on physical and neurological examinations, or in clinical pathology, CSF analysis or histopathology of DGX or PCC-treated animals. No consistent signs of cerebral compression, CSF leak, hemorrhage, or hydrocephalus were noted on MRI. In the efficacy study, no significant difference was found between FTC and PCC at each time point or overall (13.9 vs 12.3 mm Hg, n = 18 per group, P = .46). CONCLUSION: PCC is safe for use as a dural substitute and effective as a dural sealant. The novel, self-adhering combination of a polyethylene glycol-based sealant and a collagen pad may offer unique benefits to the advancement of duraplasty.

Control of bleeding in surgical procedures: critical appraisal of HEMOPATCH (Sealing Hemostat).

The need for advanced hemostatic agents increases with the complexity of surgical procedures and use of anticoagulation and antiplatelet treatments. HEMOPATCH (Sealing Hemostat) is a novel, advanced hemostatic pad that is composed of a synthetic, protein-reactive monomer and a collagen backing. The active side is covered with a protein-reactive monomer: N-hydroxysuccinimide functionalized polyethylene glycol (NHS-PEG). NHS-PEG rapidly affixes the collagen pad to tissue to promote and maintain hemostasis. The combined action of the NHS-PEG and collagen is demonstrated to have benefit relative to other hemostatic agents in surgery and preclinical surgical models. This paper reviews the published investigations and case reports of the hemostatic efficacy of HEMOPATCH, wherein HEMOPATCH is demonstrated to be an effective, easy-to-use hemostatic agent in open and minimally invasive surgery of patients with thrombin- or platelet-induced coagulopathies.

Swelling, sealing, and hemostatic ability of a novel biomaterial: A polyethylene glycol-coated collagen pad.

Trends in the development of hemostatic agents are towards self-adhering pads. This study investigates a novel biomaterial made of a polyethylene glycol-coated collagen pad (PCC). The swelling and adherence of PCC were investigated in vitro, and the hemostatic and sealing ability was investigated in vivo. In vitro, the maximum swell of PCC submerged in human plasma for 24 h is 65%. The greatest swell was in thickness, averaging 24% to a mean thickness of 2.5 ± 0.19 mm (mean±SD) (N = 20). PCC withstood clinically relevant pressures when applied to a collagen casing washed with bile, lymph, urine, saline, and cerebrospinal fluid mixed at 33% and 67% with blood. In vivo, PCC provided complete hemostasis when applied to severe, arterial bleeds of actively ventilated pulmonary parenchyma at 3, 5, 8, and 10 min after application in a heparinized porcine pulmonary segmentectomy model. The mean rate of bleeding was 17.7 ± 8.6 ml/min. The lungs were ventilated at 15 ± 4 breaths per min and an airway pressure of 19 ± 2 cm H2O. PCC had no incidence of hematoma and an 11% incidence of intraoperative air leak (N = 36). These data are promising for future clinical application of a new versatile, self-adhering hemostatic sealing pad consisting of a polyethylene glycol-coated collagen.

Engineering axially vascularized bone in the sheep arteriovenous-loop model.

Treatment of complex bone defects in which vascular supply is insufficient is still a challenge. To overcome the limitations from autologous grafts, a sheep model has been established recently, which is characterized by the development of an independent axial vascularization of a bioartificial construct, permitting microsurgical transplantation. To engineer independently axially vascularized bone tissue in the sheep arteriovenous (AV)-loop model, mesenchymal stem cells (MSCs), without and in combination with recombinant human bone morphogenetic protein-2 (rhBMP-2), were harvested and directly autotransplanted in combination with ß-tricalcium phosphate-hydroxyapatite (ß-TCP-HA) granules into sheep in this study. After explantation after 12 weeks, histological and immunohistochemical evaluation revealed newly formed bone in both groups. An increased amount of bone area was obtained using directly autotransplanted MSCs with rhBMP-2 stimulation. Osteoblastic and osteoclastic cells were detected adjacent to the newly formed bone, revealing an active bone remodelling process. Directly autotransplanted MSCs can be found close to the ß-TCP-HA granules and are contributing to bone formation. Over time, magnetic resonance imaging (MRI) and micro-computed tomography (µCT) imaging confirmed the dense vascularization arising from the AV-loop. This study shows de novo engineering of independently axially vascularized transplantable bone tissue in clinically significant amounts, using directly autotransplanted MSCs and rhBMP-2 stimulation in about 12 weeks in the sheep AV-loop model. This strategy of engineering vascularized transplantable bone tissue could be possibly transferred to the clinic in the future in order to augment current reconstructive strategies.

Fibrin chain cross-linking, fibrinolysis, and in vivo sealing efficacy of differently structured fibrin sealants.

In this study, we compared the sealing characteristics and efficacy of a fibrin sealant with reduced plasminogen (FS-rplg) and a fibrin sealant with aprotinin as a fibrinolysis inhibitor (FS-apr). The relevant sealing characteristics including clot structure, fibrin chain cross-linking, and clot lysis were tested in the laboratory. The sealing efficacy was then investigated in a follow-up animal model to determine differences in the in vivo sealing properties. A total of 46 animals were available for the final analysis with 23 animals in each treatment arm. In conclusion, we saw differences in vitro between FS-rplg and FS-apr in ultrastructure and α-chain cross-linking rates as well as in the rate of fibrinolysis. These differences may explain the significantly enhanced sealing efficacy in FS-apr compared to FS-rplg shown in vivo in a rabbit intestinal model.

Composition of fibrin glues significantly influences axial vascularization and degradation in isolation chamber model.

In this study, different fibrin sealants with varying concentrations of the fibrin components were evaluated in terms of matrix degradation and vascularization in the arteriovenous loop (AVL) model of the rat. An AVL was placed in a Teflon isolation chamber filled with 500 µl fibrin gel. The matrix was composed of commercially available fibrin gels, namely Beriplast (Behring GmbH, Marburg, Germany) (group A), Evicel (Omrix Biopharmaceuticals S.A., Somerville, New Jersey, USA) (group B), Tisseel VH S/D (Baxter, Vienna, Austria) with a thrombin concentration of 4 IU/ml and a fibrinogen concentration of 80 mg/ml [Tisseel S F80 (Baxter), group C] and with an fibrinogen concentration of 20 mg/ml [Tisseel S F20 (Baxter), group D]. After 2 and 4 weeks, five constructs per group and time point were investigated using micro-computed tomography, and histological and morphometrical analysis techniques. The aprotinin, factor XIII and thrombin concentration did not affect the degree of clot degradation. An inverse relationship was found between fibrin matrix degradation and sprouting of blood vessels. By reducing the fibrinogen concentration in group D, a significantly decreased construct weight and an increased generation of vascularized connective tissue were detected. There was an inverse relationship between matrix degradation and vascularization detectable. Fibrinogen as the major matrix component showed a significant impact on the matrix properties. Alteration of fibrin gel properties might optimize formation of blood vessels.

High thrombin concentrations in fibrin sealants induce apoptosis in human keratinocytes.

Over the last century many studies have been performed to assess the impact of fibrin sealant (FS) components on cells. Because of the noncovalent bonding of thrombin to fibrin during fibrin clot formation, we wanted to further evaluate the impact of fibrin bound thrombin on cell viability. Initially, we quantified the activity of thrombin in three different, commercially available FS. This information was used to prepare fibrin clots covering a range of thrombin concentrations from 4 to 820 IU mL(-1), but which were identical with respect to all other constituents. Although these fibrin clots did not differ in their three-dimensional structure, clots prepared with highly concentrated thrombin (820 IU mL(-1)) failed to support adhesion and spreading of primary human keratinocytes (NHEK). The number of attached cells was also significantly reduced on high thrombin activity clots. We hypothesized that these observations are not only the consequence of decreased proliferation but of apoptotic mechanisms, since the expression of cleaved caspase 3 and 7 was strongly enhanced on fibrin clots with high thrombin activity. This was accompanied by an induction of expression of Trail-R2 which is a receptor known to mediate apoptosis signals. Blocking of thrombin activity by hirudin led to an improvement of cell morphology and to an increase in number of attached cells. In addition, the induction of caspase 3 and 7 was also reduced. Thus, here we report for the first time that fibrin bound thrombin does not only decrease proliferation (as already published by others), it also does induce NHEK apoptosis when present at high concentrations.

Cell compatibility of fibrin sealants: in vitro study with cells involved in soft tissue repair.

Fibrin sealants can be used to support tissue regeneration or as vehicles for delivery of cells in tissue engineering. Differences in the composition of fibrin sealants, however, could determine the success of such applications. The results presented in this article show clear differences between Fibrin sealant A (FS A) clots and Fibrin sealant B (FS B) clots with respect to their compatibility with primary human cells involved in soft tissue repair. FS A clots, which are characterized by a physiological coarse fibrin structure, promoted attachment, spreading, and proliferation of keratinocytes, fibroblasts, and endothelial cells. In contrast, FS B clots displaying a fine to medium clot structure failed to support spreading of all three cell types. Adhesion of keratinocytes was decreased on FS B clots compared to FS A clots after 3 h incubation, whereas number of attached fibroblasts and endothelial cells was initially comparable between the two fibrin sealants. However, all three cell types proliferated on FS A clots but no sustained proliferation was detected on FS B clots. We further demonstrate that the observed differences between FS A and B clots are partly based upon 1 M sodium chloride extractable constituents, like thrombin, and partly on nonextractable constituents or the fibrin structure. In conclusion, our in vitro results demonstrate that FS A clots serve as a provisional matrix that encourages adhesion and growth of keratinocytes, fibroblasts, and endothelial cells. Therefore, FS A seems to be well suited for applications in tissue engineering.

Directly auto-transplanted mesenchymal stem cells induce bone formation in a ceramic bone substitute in an ectopic sheep model.

Bone tissue engineering approaches increasingly focus on the use of mesenchymal stem cells (MSC). In most animal transplantation models MSC are isolated and expanded before auto cell transplantation which might be critical for clinical application in the future. Hence this study compares the potential of directly auto-transplanted versus in vitro expanded MSC with or without bone morphogenetic protein-2 (BMP-2) to induce bone formation in a large volume ceramic bone substitute in the sheep model. MSC were isolated from bone marrow aspirates and directly auto-transplanted or expanded in vitro and characterized using fluorescence activated cell sorting (FACS) and RT-PCR analysis before subcutaneous implantation in combination with BMP-2 and ß-tricalcium phosphate/hydroxyapatite (ß-TCP/HA) granules. Constructs were explanted after 1 to 12 weeks followed by histological and RT-PCR evaluation. Sheep MSC were CD29(+), CD44(+) and CD166(+) after selection by Ficoll gradient centrifugation, while directly auto-transplanted MSC-populations expressed CD29 and CD166 at lower levels. Both, directly auto-transplanted and expanded MSC, were constantly proliferating and had a decreasing apoptosis over time in vivo. Directly auto-transplanted MSC led to de novo bone formation in a heterotopic sheep model using a ß-TCP/HA matrix comparable to the application of 60 µg/ml BMP-2 only or implantation of expanded MSC. Bone matrix proteins were up-regulated in constructs following direct auto-transplantation and in expanded MSC as well as in BMP-2 constructs. Up-regulation was detected using immunohistology methods and RT-PCR. Dense vascularization was demonstrated by CD31 immunohistology staining in all three groups. Ectopic bone could be generated using directly auto-transplanted or expanded MSC with ß-TCP/HA granules alone. Hence BMP-2 stimulation might become dispensable in the future, thus providing an attractive, clinically feasible approach to bone tissue engineering.

Automatic quantitative micro-computed tomography evaluation of angiogenesis in an axially vascularized tissue-engineered bone construct.

INTRODUCTION: We invented an automatic observer-independent quantitative method to analyze vascularization using micro-computed tomography (CT) along with three-dimensional (3D) reconstruction in a tissue engineering model. MATERIALS AND METHODS: An arteriovenous loop was created in the medial thigh of 30 rats and was placed in a particulated porous hydroxyapatite and beta-tricalcium phosphate matrix, filled with fibrin (10 mg/mL fibrinogen and 2 IU/mL thrombin) without (group A) or with (group B) application of fibrin-gel-immobilized angiogenetic growth factors vascular endothelial growth factor (VEGF¹65) and basic fibroblast growth factor (bFGF). The explantation intervals were 2, 4, and 8 weeks. Specimens were investigated by means of micro-CT followed by an automatic 3D analysis, which was correlated to histomorphometrical findings. RESULTS: In both groups, the arteriovenous loop led to generation of dense vascularized connective tissue with differentiated and functional vessels inside the matrix. Quantitative analysis of vascularization using micro-CT showed to be superior to histological analysis. The micro-CT analysis also allows the assessment of different other, more complex vascularization parameters within 3D constructs, demonstrating an early improvement of vascularization by application of fibrin-gel-immobilized VEGF¹65 and bFGF. CONCLUSIONS: In this study quantitative analysis of vascularization using micro-CT along with 3D reconstruction and automatic analysis exhibit to be a powerful method superior to histological evaluation of cross sections.

Axial vascularization of a large volume calcium phosphate ceramic bone substitute in the sheep AV loop model.

Vascularization still remains an obstacle to engineering of bone tissue with clinically relevant dimensions. Our aim was to induce axial vascularization in a large volume of a clinically approved biphasic calcium phosphate ceramic by transferring the arteriovenous (AV) loop approach to a large animal model. HA/beta-TCP granula were mixed with fibrin gel for a total volume of 16 cm(3), followed by incorporation into an isolation chamber together with an AV loop. The chambers were implanted into the groins of merino sheep and the development of vascularization was monitored by sequential non-invasive magnetic resonance imaging (MRI). The chambers were explanted after 6 and 12 weeks, the pedicle was perfused with contrast agent and specimens were subjected to micro-computed tomography (micro-CT) scan and histological analysis. Sequential MRI demonstrated a significantly increased perfusion in the HA/beta-TCP matrices over time. Micro-CT scans and histology confirmed successful axial vascularization of HA/beta-TCP constructs. This study demonstrates, for the first time, successful axial vascularization of a clinically approved bone substitute with a significant volume in a large animal model by means of a microsurgically created AV loop, thus paving the way for the first microsurgical transplantation of a tissue-engineered, axially vascularized bone with clinically relevant dimensions.

Epitope mapping of neutralizing TSST-1 specific antibodies induced by immunization with toxin or toxoids.

Toxic shock syndrome toxin-1 (TSST-1), a superantigen produced by Staphylococcus aureus, is a potent stimulator of the immune system. T-cells are activated by crosslinking of MHC class II molecules on antigen presenting cells with T-cell receptors (TCR). TSST-1 is associated with the majority of the cases of menstrual staphylococcal toxic shock, a severe and life-threatening multisystem disorder. Even though antibody mediated protection has been studied, information on antibody specificity directed to individual antigenic determinants of the protein is incomplete. To obtain immunogens with low toxicity, we generated a double-site mutant (dmTSST-1), modified at solvent-exposed residues predicted to be important for both MHC class II and TCR binding, and detoxified recombinantly expressed TSST-1 (rTSST-1) as well as native TSST-1 (nTSST-1) isolated from Staphylococcus aureus by treatment with formaldehyde. Rabbits were immunized with rTSST-1, nTSST-1, dmTSST-1, and formaldehyde inactivated toxoids. The sera obtained were used to map the antigen-reactive regions of the molecule and to identify specificities of antibodies induced by immunization with the different antigens. To detect linear antigenic epitopes of TSST-1 the reactivity of the sera with 11-meric peptides having an overhang of four residues, covering the entire molecule of TSST-1, have been studied. We found that sera of TSST-1 immunized rabbits predominantly reacted with N-terminal residues 1-15, while sera generated with formaldehyde inactivated toxoid recognized a total of 7 regions located at the N- and C-terminus and internal sites of TSST-1. Despite different specificities all sera were able to inhibit TSST-1 induced proliferation of human mononuclear cells.

Double mutant and formaldehyde inactivated TSST-1 as vaccine candidates for TSST-1-induced toxic shock syndrome.

Up to now there is no treatment for staphylococcal toxic shock syndrome, a disease mainly induced by toxic shock syndrome toxin-1(TSST-1). There is great demand in finding means to control the disease, one of them is the development of an effective and safe vaccine against TSST-1. In this study we constructed a series of vaccine candidates and investigated their biological activity, toxicity, and potential to invoke an immune response. TSST-1 was isolated from Stahylococcus aureus supernatants and recombinantly expressed as a N-terminal 6x histidine-tagged protein in Escherichia coli. In order to obtain molecules with minimal toxicity we constructed single mutants (G31R and H135A) and one double mutant (G31R/H135A) with both residues exchanged. We also detoxified native TSST-1 isolated from S. aureus, and recombinantly expressed TSST-1 by treatment with formaldehyde. Functional activity of native and recombinant TSST-1 and grade of inocuity of mutants and toxoids was determined by investigating mitogenity, T-cell activation, and cytokine release upon stimulation of human mononuclear cells with the vaccine candidates. All substances were tested in a rabbit immunization study. After primary immunization and three additional boosts all vaccinated animals developed antibody titers against TSST-1 and were protected against challenge with a lethal doses of superantigen potentiated with lipopolysaccharide.