Environmental tobacco smoke leakage from smoking rooms.

Twenty-seven laboratory experiments were conducted in a simulated smoking room to quantify rates of environmental tobacco smoke (ETS) leakage to a nonsmoking area as a function of the physical and operational characteristics of the smoking room. Data are presented for the various types of leakage flows, the effect of these leaks on smoking room performance and nonsmoker exposure, and the relative importance of each leakage mechanism. The results indicate that the first priority for an effective smoking room is to maintain it depressurized with respect to adjoining nonsmoking areas. The amount of ETS pumped out by the smoking room door when it is opened and closed can be reduced significantly by substituting a sliding door for the standard swing-type door. An "open doorway" configuration used twice the ventilation flow of those with smoking room doors, but yielded less reduction in nonsmoker exposure. Measured results correlated well with results modeled with mass-balance equations (R(2) = 0.82-0.99). Most of these results are based on sulfur hexafluoride (SF(6)) tracer gas leakage. Because five measured ETS tracers showed good correlation with SF(6), these conclusions should apply to ETS leakage as well. Field tests of a designated smoking room in an office building qualitatively agreed with model predictions.

Genotoxicity of fractionated organic material in airborne particles from São Paulo, Brazil.

Particulate matter less than 10 microns aerodynamic diameter (PM10) is associated with adverse health effects including increased respiratory problems and mortality. PM10 is also associated with increases in cancer in some urban areas. Identification of toxic compounds in PM10 is a step toward estimating exposure to these compounds and evaluating their public health risk. However, the toxic compounds on PM10 are part of a highly complex mixture of compounds that makes chemical characterization difficult. Before this study, there has been little investigation of genotoxic compounds in particulate matter from Latin American cities. Here, both bioassay (mutagenicity) and chemical analyses were conducted with organic solvent extracts of PM10 collected from São Paulo, a major Brazilian city. Sequential extraction in dichloromethane (DCM) followed by acetone (ACE) yielded 20.3% and 10.2% of the total mass, respectively. Non-polar and moderately polar organic material solubilized in DCM. ACE extracted more polar organic species and some inorganic ions. Both extracts were fractionated separately using cyanopropyl-bonded silica chromatography with organic solvents of increasing polarity. The mass distribution among the fractions was measured. The mutagenic activity of the fractions was assayed using the microsuspension procedure with the Salmonella typhimurium tester strain TA98, with and without addition of metabolic enzymes (S9). The DCM extract had about four times higher mutagenic activity than the ACE extract. In general, addition of S9 resulted in an increase in mutagenicity of DCM fractions, but a decrease for the ACE extract. Most of the activity was concentrated in fractions in the mid-range of polarity within both the DCM and ACE extracts. The fractions were analyzed by gas chromatography with mass selective detection (GC/MS) without derivatization. The most mutagenic fractions in the DCM extract contained ketones, aldehydes, and quinolines. The most mutagenic ACE fraction had ketones, carboxylic acids, and aldehydes.

A new carbon monoxide occupational dosimeter: results from a worker exposure assessment survey.

The LBNL/QGI occupational carbon monoxide (CO) dosimeter (LOCD), a new, inexpensive CO passive sampler, was field-validated in an occupational exposure assessment study in the Moscone Convention Center (MCC) in San Francisco, CA in January, 1997. The LOCD measures time-weighed-average (TWA) CO exposures from 10 to 800 parts per million hours (ppm h; accuracy +/- 20%; precision 10 ppm h). This device represents a major improvement over currently available low-cost personal CO monitors. At the MCC, over 1000 workers set up and remove exhibitions. Forty propane-powered forklifts moved materials throughout the 42,000 m2 of exhibit halls. Diesel truck emissions enter the building via three internal underground loading docks. The LOCD was used to measure 154 worker exposures on 3 days. Sampler performance was compared to a standard method at 15 fixed sites. The geometric mean (GM) of all 154 exposures was 7 ppm (geometric standard deviation (GSD) = 1.6); 10% of the exposures was 10 ppm or more. Dock Walkers and Forklift Operators had the highest exposures (maximum = 34 ppm) with GM (GSD) of 9 (1.7) and 9 (1.6) ppm, respectively. Attendants and Installer/Decorators had the lowest exposures with GMs of 6 (1.6) and 7 (1.4), respectively. The Cal/OSHA personal exposure limit for CO is 25 ppm time-weighted average (TWA).