Macromolecular Interactions of Lipoprotein Lipase (LPL).

Lipoprotein lipase (LPL) is a critical enzyme in humans that provides fuel to peripheral tissues. LPL hydrolyzes triglycerides from the cores of lipoproteins that are circulating in plasma and interacts with receptors to mediate lipoprotein uptake, thus directing lipid distribution via catalytic and non-catalytic functions. Functional losses in LPL or any of its myriad of regulators alter lipid homeostasis and potentially affect the risk of developing cardiovascular disease-either increasing or decreasing the risk depending on the mutated protein. The extensive LPL regulatory network tunes LPL activity to allocate fatty acids according to the energetic needs of the organism and thus is nutritionally responsive and tissue dependent. Multiple pharmaceuticals in development manipulate or mimic these regulators, demonstrating their translational importance. Another facet of LPL biology is that the oligomeric state of the enzyme is also central to its regulation. Recent structural studies have solidified the idea that LPL is regulated not only by interactions with other binding partners but also by self-associations. Here, we review the complexities of the protein-protein and protein-lipid interactions that govern LPL structure and function.

Structure of dimeric lipoprotein lipase reveals a pore adjacent to the active site.

Lipoprotein lipase (LPL) hydrolyzes triglycerides from circulating lipoproteins, releasing free fatty acids. Active LPL is needed to prevent hypertriglyceridemia, which is a risk factor for cardiovascular disease (CVD). Using cryogenic electron microscopy (cryoEM), we determined the structure of an active LPL dimer at 3.9 Å resolution. This structure reveals an open hydrophobic pore adjacent to the active site residues. Using modeling, we demonstrate that this pore can accommodate an acyl chain from a triglyceride. Known LPL mutations that lead to hypertriglyceridemia localize to the end of the pore and cause defective substrate hydrolysis. The pore may provide additional substrate specificity and/or allow unidirectional acyl chain release from LPL. This structure also revises previous models on how LPL dimerizes, revealing a C-terminal to C-terminal interface. We hypothesize that this active C-terminal to C-terminal conformation is adopted by LPL when associated with lipoproteins in capillaries.

Combined action of albumin and heparin regulates lipoprotein lipase oligomerization, stability, and ligand interactions.

Lipoprotein lipase (LPL), a crucial enzyme in the intravascular hydrolysis of triglyceride-rich lipoproteins, is a potential drug target for the treatment of hypertriglyceridemia. The activity and stability of LPL are influenced by a complex ligand network. Previous studies performed in dilute solutions suggest that LPL can appear in various oligomeric states. However, it was not known how the physiological environment, that is blood plasma, affects the action of LPL. In the current study, we demonstrate that albumin, the major protein component in blood plasma, has a significant impact on LPL stability, oligomerization, and ligand interactions. The effects induced by albumin could not solely be reproduced by the macromolecular crowding effect. Stabilization, isothermal titration calorimetry, and surface plasmon resonance studies revealed that albumin binds to LPL with affinity sufficient to form a complex in both the interstitial space and the capillaries. Negative stain transmission electron microscopy and raster image correlation spectroscopy showed that albumin, like heparin, induced reversible oligomerization of LPL. However, the albumin induced oligomers were structurally different from heparin-induced filament-like LPL oligomers. An intriguing observation was that no oligomers of either type were formed in the simultaneous presence of albumin and heparin. Our data also suggested that the oligomer formation protected LPL from the inactivation by its physiological regulator angiopoietin-like protein 4. The concentration of LPL and its environment could influence whether LPL follows irreversible inactivation and aggregation or reversible LPL oligomer formation, which might affect interactions with various ligands and drugs. In conclusion, the interplay between albumin and heparin could provide a mechanism for ensuring the dissociation of heparan sulfate-bound LPL oligomers into active LPL upon secretion into the interstitial space.

Structure of Dimeric Lipoprotein Lipase Reveals a Pore for Hydrolysis of Acyl Chains.

Lipoprotein lipase (LPL) hydrolyzes triglycerides from circulating lipoproteins, releasing free fatty acids. Active LPL is needed to prevent hypertriglyceridemia, which is a risk factor for cardiovascular disease (CVD). Using cryogenic electron microscopy (cryoEM), we determined the structure of an active LPL dimer at 3.9 Å resolution. This is the first structure of a mammalian lipase with an open, hydrophobic pore adjacent to the active site. We demonstrate that the pore can accommodate an acyl chain from a triglyceride. Previously, it was thought that an open lipase conformation was defined by a displaced lid peptide, exposing the hydrophobic pocket surrounding the active site. With these previous models after the lid opened, the substrate would enter the active site, be hydrolyzed and then released in a bidirectional manner. It was assumed that the hydrophobic pocket provided the only ligand selectivity. Based on our structure, we propose a new model for lipid hydrolysis, in which the free fatty acid product travels unidirectionally through the active site pore, entering and exiting opposite sides of the protein. By this new model, the hydrophobic pore provides additional substrate specificity and provides insight into how LPL mutations in the active site pore may negatively impact LPL activity, leading to chylomicronemia. Structural similarity of LPL to other human lipases suggests that this unidirectional mechanism could be conserved but has not been observed due to the difficulty of studying lipase structure in the presence of an activating substrate. We hypothesize that the air/water interface formed during creation of samples for cryoEM triggered interfacial activation, allowing us to capture, for the first time, a fully open state of a mammalian lipase. Our new structure also revises previous models on how LPL dimerizes, revealing an unexpected C-terminal to C-terminal interface. The elucidation of a dimeric LPL structure highlights the oligomeric diversity of LPL, as now LPL homodimer, heterodimer, and helical filament structures have been elucidated. This diversity of oligomerization may provide a form of regulation as LPL travels from secretory vesicles in the cell, to the capillary, and eventually to the liver for lipoprotein remnant uptake. We hypothesize that LPL dimerizes in this active C-terminal to C-terminal conformation when associated with mobile lipoproteins in the capillary.

Comparison of angiopoietin-like protein 3 and 4 reveals structural and mechanistic similarities.

Elevated plasma triglycerides are a risk factor for coronary artery disease, which is the leading cause of death worldwide. Lipoprotein lipase (LPL) reduces triglycerides in the blood by hydrolyzing them from triglyceride-rich lipoproteins to release free fatty acids. LPL activity is regulated in a nutritionally responsive manner by macromolecular inhibitors including angiopoietin-like proteins 3 and 4 (ANGPTL3 and ANGPTL4). However, the mechanism by which ANGPTL3 inhibits LPL is unclear, in part due to challenges in obtaining pure protein for study. We used a new purification protocol for the N-terminal domain of ANGPTL3, removing a DNA contaminant, and found DNA-free ANGPTL3 showed enhanced inhibition of LPL. Structural analysis showed that ANGPTL3 formed elongated, flexible trimers and hexamers that did not interconvert. ANGPTL4 formed only elongated flexible trimers. We compared the inhibition of ANGPTL3 and ANGPTL4 using human very-low-density lipoproteins as a substrate and found both were noncompetitive inhibitors. The inhibition constants for the trimeric ANGPTL3 (7.5 ± 0.7 nM) and ANGPTL4 (3.6 ± 1.0 nM) were only 2-fold different. Heparin has previously been reported to interfere with ANGPTL3 binding to LPL, so we questioned if the negatively charged heparin was acting in a similar fashion to the DNA contaminant. We found that ANGPTL3 inhibition is abolished by binding to low-molecular-weight heparin, whereas ANGPTL4 inhibition is not. Our data show new similarities and differences in how ANGPTL3 and ANGPTL4 regulate LPL and opens new avenues of investigating the effect of heparin on LPL inhibition by ANGPTL3.

The structure of helical lipoprotein lipase reveals an unexpected twist in lipase storage.

Lipases are enzymes necessary for the proper distribution and utilization of lipids in the human body. Lipoprotein lipase (LPL) is active in capillaries, where it plays a crucial role in preventing dyslipidemia by hydrolyzing triglycerides from packaged lipoproteins. Thirty years ago, the existence of a condensed and inactive LPL oligomer was proposed. Although recent work has shed light on the structure of the LPL monomer, the inactive oligomer remained opaque. Here we present a cryo-EM reconstruction of a helical LPL oligomer at 3.8-Å resolution. Helix formation is concentration-dependent, and helices are composed of inactive dihedral LPL dimers. Heparin binding stabilizes LPL helices, and the presence of substrate triggers helix disassembly. Superresolution fluorescent microscopy of endogenous LPL revealed that LPL adopts a filament-like distribution in vesicles. Mutation of one of the helical LPL interaction interfaces causes loss of the filament-like distribution. Taken together, this suggests that LPL is condensed into its inactive helical form for storage in intracellular vesicles.

Protecting activity of desiccated enzymes.

Protein-based biological drugs and many industrial enzymes are unstable, making them prohibitively expensive. Some can be stabilized by formulation with excipients, but most still require low temperature storage. In search of new, more robust excipients, we turned to the tardigrade, a microscopic animal that synthesizes cytosolic abundant heat soluble (CAHS) proteins to protect its cellular components during desiccation. We find that CAHS proteins protect the test enzymes lactate dehydrogenase and lipoprotein lipase against desiccation-, freezing-, and lyophilization-induced deactivation. Our data also show that a variety of globular and disordered protein controls, with no known link to desiccation tolerance, protect our test enzymes. Protection of lactate dehydrogenase correlates, albeit imperfectly, with the charge density of the protein additive, suggesting an approach to tune protection by modifying charge. Our results support the potential use of CAHS proteins as stabilizing excipients in formulations and suggest that other proteins may have similar potential.

Single-Molecule Magnetic Tweezer Analysis of Topoisomerases.

Magnetic tweezers (MT) provide a powerful single-molecule approach to study the mechanism of topoisomerases, giving the experimenter the ability to change and read out DNA topology in real time. By using diverse DNA substrates, one can study different aspects of topoisomerase function and arrive at a better mechanistic understanding of these fascinating enzymes. Here we describe methods for the creation of three different DNA substrates used in MT experiments with topoisomerases: double-stranded DNA (dsDNA) tethers, "braided" (intertwined or catenated) DNA tether pairs, and dsDNA tethers with single-stranded DNA (ssDNA) regions. Additionally, we discuss how to build flow cells for bright-field MT microscopy, as well as how to noncovalently attach anti-digoxigenin to the coverslip surface for tethering digoxigenin-labeled DNAs. Finally, we describe procedures for the identification of a suitable DNA substrate for MT study and data collection.

Nucleation of Multiple Buckled Structures in Intertwined DNA Double Helices.

We study the statistical-mechanical properties of intertwined double-helical DNAs (DNA braids). In magnetic tweezers experiments, we find that torsionally stressed stretched braids supercoil via an abrupt buckling transition, which is associated with the nucleation of a braid end loop, and that the buckled braid is characterized by a proliferation of multiple domains. Differences between the mechanics of DNA braids and supercoiled single DNAs can be understood as an effect of the increased bulkiness in the structure of the former. The experimental results are in accord with the predictions of a statistical-mechanical model.

An orthogonal single-molecule experiment reveals multiple-attempt dynamics of type IA topoisomerases.

Topoisomerases are enzymes that are involved in maintaining the topological state of cellular DNA. Their dynamic characteristics remain poorly understood despite numerous structural, biophysical and biochemical studies. Recent single-molecule experiments revealed that an important feature of the type IA topoisomerase mechanism is the presence of pauses between relaxation events. However, these experiments could not determine whether the protein remains DNA bound during the pauses or what relationship may exist between protein domain movements and topological changes in the DNA. By combining two orthogonal single-molecule techniques, we found that E. coli topoisomerase I constantly changes conformation when attempting to modify the topology of DNA, but succeeds in only a fraction of the attempts. Thus, its mechanism can be described as a series of DNA strand-passage attempts that culminate in a successful relaxation event.

Bacterial topoisomerase I and topoisomerase III relax supercoiled DNA via distinct pathways.

Escherichia coli topoisomerases I and III (Topo I and Topo III) relax negatively supercoiled DNA and also catenate/decatenate DNA molecules containing single-stranded DNA regions. Although these enzymes share the same mechanism of action and have similar structures, they participate in different cellular processes. In bulk experiments Topo I is more efficient at DNA relaxation, whereas Topo III is more efficient at catenation/decatenation, probably reflecting their differing cellular roles. To examine the differences in the mechanism of these two related type IA topoisomerases, single-molecule relaxation studies were conducted on several DNA substrates: negatively supercoiled DNA, positively supercoiled DNA with a mismatch and positively supercoiled DNA with a bulge. The experiments show differences in the way the two proteins work at the single-molecule level, while also recovering observations from the bulk experiments. Overall, Topo III relaxes DNA efficiently in fast processive runs, but with long pauses before relaxation runs, whereas Topo I relaxes DNA in slow processive runs but with short pauses before runs. The combination of these properties results in Topo I having an overall faster total relaxation rate, even though the relaxation rate during a run for Topo III is much faster.