Modal Parameter Recursive Estimation of Concrete Arch Dams under Seismic Loading Using an Adaptive Recursive Subspace Method.

Modal parameter estimation is crucial in vibration-based damage detection and deserves increased attention and investigation. Concrete arch dams are prone to damage during severe seismic events, leading to alterations in their structural dynamic characteristics and modal parameters, which exhibit specific time-varying properties. This highlights the significance of investigating the evolution of their modal parameters and ensuring their accurate identification. To effectively accomplish the recursive estimation of modal parameters for arch dams, an adaptive recursive subspace (ARS) method with variable forgetting factors was proposed in this study. In the ARS method, the variable forgetting factors were adaptively updated by assessing the change rate of the spatial Euclidean distance of adjacent modal frequency identification values. A numerical simulation of a concrete arch dam under seismic loading was conducted by using ABAQUS software, in which a concrete damaged plasticity (CDP) model was used to simulate the dam body's constitutive relation, allowing for the assessment of damage development under seismic loading. Utilizing the dynamic responses obtained from the numerical simulation, the ARS method was implemented for the modal parameter recursive estimation of the arch dam. The identification results revealed a decreasing trend in the frequencies of the four initial modes of the arch dam: from an undamaged state characterized by frequencies of 0.910, 1.166, 1.871, and 2.161 Hz to values of 0.895, 1.134, 1.842, and 2.134 Hz, respectively. Concurrently, increases in the damping ratios of these modes were observed, transitioning from 4.44%, 4.28%, 5.42%, and 5.56% to 4.98%, 4.91%, 6.61%, and 6.85%%, respectively. The correlation of the identification results with damage progression validated the effectiveness of the ARS method. This study's outcomes have substantial theoretical and practical importance, facilitating the immediate comprehension of the dynamic characteristics and operational states of concrete arch dam structures.

Modeling temporal correlation and heterogeneity in real-time conflict rates using Bayesian Tobit models for signalized intersections.

The use of real-time traffic conflicts for safety studies provide more insight into how important dynamic signal cycle-related characteristics can affect intersection safety. However, such short-time window for data collection raises a critical issue that the observed conflicts are temporally correlated. As well, there is likely unobserved heterogeneity across different sites that exist in conflict data. The objective of this study is to develop real-time traffic conflict rates models simultaneously accommodating temporal correlation and unobserved heterogeneity across observations. Signal cycle level traffic data, including traffic conflicts, traffic and shock wave characteristics, collected from six signalized intersections were used. Three types of Tobit models: conventional Tobit model, temporal Tobit (T-Tobit) model, and temporal grouped random parameters (TGRP-Tobit) model were developed under full Bayesian framework. The results show that significant temporal correlations are found in T-Tobit models and TGRP-Tobit models, and the inclusion of temporal correlation considerably improves the goodness-of-fit of these Tobit models. The TGRP-Tobit models perform best with the lowest Deviance Information Criteria (DIC), indicating that accounting for the unobserved heterogeneity can further improve the model fit. The parameter estimates show that real-time traffic conflict rates are significantly associated with traffic volume, shock wave area, shock wave speed, queue length, and platoon ratio.

Dynamic Failure Experimental Study of a Gravity Dam Model on a Shaking Table and Analysis of Its Structural Dynamic Characteristics.

Investigating the dynamic response patterns and failure modes of concrete gravity dams subjected to strong earthquakes is a pivotal area of research for addressing seismic safety concerns associated with gravity dam structures. Dynamic shaking table testing has proven to be a robust methodology for exploring the dynamic characteristics and failure modes of gravity dams. This paper details the dynamic test conducted on a gravity dam model on a shaking table. The emulation concrete material, featuring high density, low dynamic elastic modulus, and appropriate strength, was meticulously designed and fabricated. Integrating the shaking table conditions with the model material, a comprehensive gravity dam shaking table model test was devised to capture the dynamic response of the model under various dynamic loads. Multiple operational conditions were carefully selected for in-depth analysis. Leveraging the dynamic strain responses, the progression of damage in the gravity dam model under these diverse conditions was thoroughly examined. Subsequently, the recorded acceleration responses were utilized for identifying dynamic characteristic parameters, including the acceleration amplification factor in the time domain, acceleration response spectrum characteristics in the frequency domain, and modal parameters reflecting the inherent characteristics of the structure. To gain a comprehensive understanding, a comparative analysis was performed by aligning the observed damage development with the identified dynamic characteristic parameters, and the sensitivity of these identified parameters to different levels of damage was discussed. The findings of this study not only offer valuable insights for conducting and scrutinizing shaking table experiments on gravity dams but also serve as crucial supporting material for identifying structural dynamic characteristic parameters and validating damage diagnosis methods for gravity dam structures.

Research on the material removal in the polishing of potassium dihydrogen phosphate crystals based on deliquescent action.

Through the polishing experiments of potassium dihydrogen phosphate (KDP) crystals based on deliquescent action, the effect of several major factors, including crystal's initial surface state, polishing time, and revolution of polishing plate, on material removal was researched. Under certain experimental conditions, the rules of material removal were reached, and experimental results are discussed, which lays the foundation for popularization and application of polishing technology for KDP crystals based on deliquescent action.