RESUMO
This article compares the influence of blending the low-viscous oxygenated camphor oil with hydrocarbon diesel fuel and high-viscous oxygenated Karanja oil. The experiment is conducted in a four-stroke one-cylinder naturally aspirated Kirloskar compression ignition (CI) engine coupled with an eddy current dynamometer. The three types of fuel blends are prepared by blending the camphor oil with Karanja oil on the volume ratio of 30:70 (C30K70), 50:50 (C50K50), and 70:30 (C70K30), and the other three types of fuels are prepared by blending the camphor oil with diesel on the volume ratio of 30:70 (C30D70), 50:50 (C50D50), and 70:30 (C70D30). The experimental efficiency results show higher thermal efficiency of 31.86% and 30.84% for C70D30 and C70K30 at rated operating conditions. The brake-specific energy consumptions of C70D30 and C70K30 were found to be 11.29 and 11.67 MJ/kWh, respectively, at rated operating conditions. The lowest CO, CO2, HC, and smoke emissions are found for C70D30 at rated operating conditions, which are 96.58%, 6.15%, 34.20%, and 7.59% lower than diesel. However, the NO emissions were found to be 27.62% higher for C70D30 than diesel at full load. The rate of pressure rise, net heat release rate, and cyclic variations were found to increase with increase in proportion of the camphor oil. The P-v diagram also confirms the lower heat addition period for the C70D30 and C70K30 with an increase in brake thermal efficiency. The actual compression ratio and the actual cutoff ratio are found to have a reasonable correlation with the thermal efficiency of the engine. The exergy efficiency of C30K70 is found higher which is 2.11% higher than diesel fuel at rated power. Second-order polynomial equations were obtained for the engine characteristics using the curve fitting method, and the characteristic equations confirmed the confidence level of 95%.
