Priority list of pharmaceutical active compounds in aquatic environments of Mexico considering their occurrence, environmental and human health risks.

Pharmaceutical active compounds (PhACs) are detected pollutants in aquatic environments worldwide at concentrations ranging from ng L-1 to µg L-1. Currently, PhAC monitoring is poorly realized in Mexico. This study proposes a priority list of PhACs in Mexican aquatic environments, considering their occurrence and environmental and human health risks. Ecological risks were assessed as Risk Quotients (RQ) values using the PhAC concentrations detected in surface water, obtaining high risks (RQ > 1) against aquatic organisms, especially of naproxen, ibuprofen, diclofenac, acetaminophen, 17ß-estradiol, carbamazepine, ketoprofen, caffeine. In contrast, potential human health risks (RQH) were assessed on the Mexican population using the concentrations quantified in groundwater, demonstrating potential risks (RQH > 0.2) on the population, particularly of DCF and CBZ. Thus, a priority list of PhACs can be used as a reference for environmental monitoring in Mexican water supplies as well as PhACs monitoring in countries of the Caribbean region and Central America.

Assessment of photo electro-Fenton and solar photo electro-Fenton processes for the efficient degradation of asulam herbicide.

The degradation of asulam herbicide by photo electro-Fenton (PEF) and solar photo electro-Fenton (SPEF) processes was studied using an undivided electrochemical BDD/carbon-felt cell to generate H2O2 continuously. A central composite design combined with response surface methodology was applied to determine the optimal operating conditions of current intensity = 0.30 A, [Fe2+] = 0.3 mM, and [Na2SO4] = 0.11 M at pH 3 to achieve the complete degradation of asulam by electro-Fenton. Subsequently, the SPEF process was more efficient treatment compared to PEF, achieving a complete degradation of asulam and 98% of mineralization in 180 min. Moreover, 4-aminobenzenesulfonamide, 4-aminophenol, and 4-benzoquinone were detected as aromatic intermediates, whereas acetic acid, oxalic acid, and NO3- ions were identified as final degradation by-products. Thus, the SPEF process is an efficient alternative for the complete degradation and mineralization of herbicide asulam in an aqueous solution under natural sunlight.

Efficient removal of veterinary drugs from aqueous solutions using magnetically separable carbonaceous materials derived from cobalt and iron metal-organic frameworks.

Rapid synthesis of carbon-based magnetic materials derived from cobalt and iron metal-organic frameworks (MOFs), ZIF-67, and MIL-100(Fe), by microwave-assisted method, followed by carbonization under a N2 atmosphere is described in this study. The carbon-derived MOFs (CDMs) were evaluated for the removal of the emerging pollutants sulfadiazine (SDZ) and flumequine (FLU) used as veterinary drugs. The study aimed to link the adsorption behavior with their surface properties and elemental composition. C-ZIF-67 and C-MIL-100(Fe) showed hierarchical porous structures with specific surface areas of 295.6 and 163.4 m2 g-1, respectively. The Raman spectra of the CDMs show the characteristic D and G bands associated with defect-rich carbon and sp2 graphitic carbon, respectively. The CDMs exhibit cobalt species (Co3O4, CoO, and Co) in C-ZIF-67 and iron species (Fe2O3, Fe3O4, and Fe) in C-MIL-100 (Fe) which are related to the magnetic behavior of CDMs. C-ZIF-67 and C-MIL-100 (Fe) had saturation magnetization values of 22.9 and 53.7 emu g-1, respectively, allowing easy solid-liquid separation using a magnet. SDZ and FLU removal rates on CDMs follow pseudo-second-order kinetics, and adsorption isotherms fit the Langmuir model based on regression coefficient values. Adsorption thermodynamics calculations showed that the adsorption of SDZ and FLU by CDMs was a thermodynamically favorable process. Therefore, these properties of C-ZIF-67 and C-MIL-100 (Fe) and their regeneration ability facilitate their use as adsorbents for emerging pollutants.

Vachellia farnesiana Pods or a Polyphenolic Extract Derived from Them Exert Immunomodulatory, Metabolic, Renoprotective, and Prebiotic Effects in Mice Fed a High-Fat Diet.

Obesity causes systemic inflammation, hepatic and renal damage, as well as gut microbiota dysbiosis. Alternative vegetable sources rich in polyphenols are known to prevent or delay the progression of metabolic abnormalities during obesity. Vachellia farnesiana (VF) is a potent source of polyphenols with antioxidant and anti-inflammatory activities with potential anti-obesity effects. We performed an in vivo preventive or an interventional experimental study in mice and in vitro experiments with different cell types. In the preventive study, male C57BL/6 mice were fed with a Control diet, a high-fat diet, or a high-fat diet containing either 0.1% methyl gallate, 10% powdered VFP, or 0.5%, 1%, or 2% of a polyphenolic extract (PE) derived from VFP (Vachellia farnesiana pods) for 14 weeks. In the intervention study, two groups of mice were fed for 14 weeks with a high-fat diet and then one switched to a high-fat diet with 10% powdered VFP for ten additional weeks. In the in vitro studies, we evaluated the effect of a VFPE (Vachellia farnesiana polyphenolic extract) on glucose-stimulated insulin secretion in INS-1E cells or of naringenin or methyl gallate on mitochondrial activity in primary hepatocytes and C2C12 myotubes. VFP or a VFPE increased whole-body energy expenditure and mitochondrial activity in skeletal muscle; prevented insulin resistance, hepatic steatosis, and kidney damage; exerted immunomodulatory effects; and reshaped fecal gut microbiota composition in mice fed a high-fat diet. VFPE decreased insulin secretion in INS-1E cells, and its isolated compounds naringenin and methyl gallate increased mitochondrial activity in primary hepatocytes and C2C12 myotubes. In conclusion VFP or a VFPE prevented systemic inflammation, insulin resistance, and hepatic and renal damage in mice fed a high-fat diet associated with increased energy expenditure, improved mitochondrial function, and reduction in insulin secretion.

Ion-Imprinted Polymer Structurally Preorganized Using a Phenanthroline-Divinylbenzoate Complex with the Cu(II) Ion as Template and Some Adsorption Results.

The novel [Cuphen(VBA)2H2O] complex (phen: phenanthroline, VBA: vinylbenzoate) was prepared and used as a functional monomer to preorganize a new ion-imprinted polymer (IIP). By leaching the Cu(II) from the molecular imprinted polymer (MIP), [Cuphen(VBA)2H2O-co-EGDMA]n (EGDMA: ethylene glycol dimethacrylate), the IIP was obtained. A non-ion-imprinted polymer (NIIP) was also prepared. The crystal structure of the complex and some physicochemical, spectrophotometric techniques were also used for the MIP, IIP, and NIIP characterization. The results showed that the materials are nonsoluble in water and polar solvents, which are the main features of polymers. The surface area of the IIP is higher than the NIIP demonstrated by the blue methylene method. The SEM images show monoliths and particles smoothly packed together on spherical and prismatic-spherical surfaces in the morphology of MIP and IIP, respectively. Moreover, the MIP and IIP could be considered as mesoporous and microporous materials, shown by the size of the pores determined by the BET and BJH methods. Furthermore, the adsorption performance of the IIP was studied using copper(II) as a contaminant heavy metal. The maximum adsorption capacity of IIP was 287.45 mg/g at 1600 mg/L Cu2+ ions with 0.1 g of IIP at room temperature. The Freundlich model was found to best describe the equilibrium isotherm of the adsorption process. The competitive results indicate that the stability of the Cu-IIP complex is higher than the Ni-IIP complex with a selectivity coefficient of 1.61.

Ecological risk assessment associated with five endocrine-disrupting compounds in wastewater treatment plants of Northeast Mexico.

The ecological risk associated with five endocrine-disrupting compounds (EDCs) was studied in four wastewater treatment plants (WWTPs) in Monterrey, Mexico. The EDCs, 17ß-estradiol (E2), 17α-ethinylestradiol (EE2), bisphenol A (BPA), 4-nonylphenol (4NP), and 4-tert-octylphenol (4TOP) were determined by SPE/GC-MS method, where EE2 and 4TOP were the most abundant in effluents at levels from 1.6 - 26.8 ng/L (EE2) and < LOD - 5.0 ng/L (4TOP), which corroborate that the wastewater discharges represent critical sources of EDCs to the aquatic environments. In this study, the potential risk associated with selected EDCs was assessed through the risk quotients (RQs) and by estimating the estrogenic activity (expressed as EEQ). This study also constitutes the first approach for the ecological risk assessment in effluents of WWTPs in Northeast Mexico. The results demonstrated that the effluents of the WWTPs represent a high risk for the organisms living in the receiving water bodies because the residual estrogens effect E2 and EE2 with RQ values up to 49.1 and 1165.2. EEQ values between 6.3 and 24.6 ngEE2/L were considered the most hazardous compounds among the target EDCs, capable of causing some alterations in the endocrine system of aquatic and terrestrial organisms due to chronic exposition.

Development of an HPLC-DAD method for the simultaneous analysis of four xenoestrogens in water and its application for monitoring photocatalytic degradation.

A high-performance liquid chromatography with diode array detector (HPLC-DAD) method was developed and validated for the simultaneous quantification of 4 xenoestrogens in water for monitoring their photocatalytic degradation in synthetic water. The analytical parameters evaluated were linearity, limits of detection, and quantification (LODs and LOQs), selectivity, and accuracy, according to the US Food and Drug Administration (FDA) and Eurachem guidelines. The developed method shows good linearity (R2 > 0.995 for all compounds), and LODs ranged from 0.02 to 0.04 mg L-1, while LOQs ranged from 0.05 to 0.11 mg L-1. Moreover, accuracy expressed as recovery and precision were within the required limits. Therefore, the developed method was considered accurate, and reliable. In addition, it was successfully applied for monitoring a mixture of 4 xenoestrogens in water during the photocatalytic treatment.•An HPLC-DAD method was developed to quantify 4 xenoestrogens in water simultaneously.•The developed HPLC-DAD method shows excellent linearity, selectivity, and accuracy.•A mixture of 4 xenoestrogens was reliably monitored during their photocatalytic degradation.

Occurrence and seasonal distribution of five selected endocrine-disrupting compounds in wastewater treatment plants of the Metropolitan Area of Monterrey, Mexico: The role of water quality parameters.

Five endocrine-disrupting compounds (EDCs) were determined in four urban wastewater treatment plants (WWTPs) of the Metropolitan Area of Monterrey (MAM) in two seasonal periods (winter and summer). The MAM, one of the most urbanized areas in Mexico, is characterized by high industrial activity and population density, leading to extensive use of several EDCs. In the MAM, ∼90% of urban and industrial wastewater is treated in WWTPs, where EDCs can be partially eliminated. In this work, dissolved levels of 17ß-estradiol (E2), 17α-ethinyl estradiol (EE2), bisphenol A (BPA), 4-nonylphenol (4NP), and 4-tert-octylphenol (4TOP) in wastewater were determined. The EDCs' determination was carried out through solid-phase extraction (SPE) and gas chromatography coupled to mass spectrometry (GC-MS). High EDCs levels (0.4-450 ng/L) were found in the influents of WWTPs, while concentrations in the effluents ranged from 0.2 to 26.8 ng/L, with E2, EE2, and 4TOP being the most persistent. The Spearman correlation analysis revealed the association between E2 and EE2 (r = 0.4835, p < 0.05), and between BPA and 4NP (r = 0.5180, p < 0.05), suggesting that these EDCs have similar sources. Also, E2, BPA, and 4TOP were positively correlated with the chemical oxygen demand (COD), biochemical oxygen demand (BOD), and total suspended solids (TSS) (r = 0.4080-0.5694, p < 0.05), indicating the association of the EDCs with the organic matter in the wastewater. The factor analysis confirmed the significant correlation of COD, BOD, TSS, temperature, and pH with the high occurrence of 4TOP during the summer. It was also confirmed that summer warmer temperatures favored the removal of BPA and 4NP in the studied WWTPs. Finally, the studied sites were classified by cluster analysis in three groups, revealing the impact that seasonality has on the behavior of the selected EDCs.

Iron metal-organic framework supported in a polymeric membrane for solid-phase extraction of anti-inflammatory drugs.

A solid-phase extraction methodology using a MIL-101(Fe)/PVDF membrane was proposed as a useful alternative for the simultaneous determination of naproxen, diclofenac, and ibuprofen, three anti-inflammatory drugs (NSAIDs), in wastewater samples by HPLC-CCD analysis. The MIL-101(Fe) was prepared by a rapid microwave-assisted method and supported in a polymeric PVDF membrane. The prepared material was characterized by X-ray diffraction (XRD), nitrogen adsorption-desorption, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared spectroscopy (FT-IR). The factors that affect the extraction of the NSAIDs using the MIL-101(Fe)/PVDF membrane as the sample volume, the solution pH and the elution solvent were studied in detail. The selected conditions were 50 mL of sample solution at pH 3 and 5 mL of methanol: acetone (30:70, v v-1) acidified with formic acid at 2% as elution solvent. The analytical method was linear with determination coefficients (r2 ≥ 0.998) in the calibration ranges from 2 to 100 ng mL-1 for naproxen, 20-200 ng mL-1 for diclofenac, and 100-300 ng mL-1 for ibuprofen. The intra and inter-day precision (repeatability and reproducibility, respectively) of the method (RSD%, n = 5) were lower than 4.8% and 7.1%, respectively. The accuracy reported as recovery percentages ranged from 82 to 118%, and the limits of detection were between 1.8 and 32.3 ng mL-1. Moreover, MIL-101(Fe)/PVDF membrane exhibited improved adsorption efficiency compared to that of its analog MIL-101(Cr)/PVDF and the pristine PVDF membranes, obtaining in an easy and rapid (60 min) way a low-cost and low-toxic adsorbent with excellent stability, reusability, mechanic resistance, and simple operation which shows excellent performance.

Magnetic porous carbons derived from cobalt(ii)-based metal-organic frameworks for the solid-phase extraction of sulfonamides.

In this work, the dispersive solid-phase extraction of sulfonamide antibiotics was evaluated using magnetic porous carbons derived from cobalt(ii)-based metal-organic frameworks. By direct carbonization under the inert atmosphere of Co-SIM-1, Co-MOF-74 and Co-DABCO MOFs, different magnetic porous carbons were prepared and characterized to study their structural, morphological, chemical and textural properties. Their performance for the simultaneous extraction of three sulfonamides (sulfadiazine, sulfamerazine and sulfamethazine), prior to HPLC analysis, was also evaluated, obtaining the best results (>95%) in the case of C/Co-SIM-1 carbon, probably due to its bimodal pore structure, high surface area and large amount of surface defects. Using this adsorbent, the effect of the solution pH and contact time on the adsorption of the sulfonamides, and the reusability of the carbon were studied.

Carbon composite membrane derived from MIL-125-NH2 MOF for the enhanced extraction of emerging pollutants.

Porous carbon derived from amine-functionalized MIL-125 metal-organic framework (C-MIL-125-NH2) was prepared by carbonization at high temperature under inert atmosphere, and used for adsorption of bisphenol A (BPA) and 4-tert-butylphenol (4-tBP). The obtained carbon showed bimodal porosity and fast extraction of both pollutants in batch conditions following a pseudo-second-order model. The adsorption mechanism was studied by the measurement of zeta potential, and the results suggested that π-π stacking interactions between the carbon material and the phenol molecules probably are the main sorption mechanism. The prepared C-MIL-125-NH2 was incorporated into mechanically stable membranes for flow-through solid-phase extraction of studied phenols prior to HPLC analysis. The hybrid material showed excellent permeance to flow, easy regeneration and good performance for the simultaneous enrichment of mixtures of BPA and 4-tBP, facilitating their determination when present at low concentration levels.

Performance of Bi2O3/TiO2 prepared by sol-gel on p-Cresol degradation under solar and visible light.

Photocatalytic degradation of p-Cresol was evaluated using the mixed oxide Bi2O3/TiO2 (containing 2 and 20% wt. Bi2O3 referred as TB2 and TB20) and was compared with bare TiO2 under simulated solar radiation. Materials were prepared by the classic sol-gel method. All solids exhibited the anatase phase by X-ray diffraction (XRD) and Raman spectroscopy. The synthesized materials presented lower crystallite size and Eg value, and also higher surface area as Bi2O3 amount was increased. Bi content was quantified showing near to 70% of theoretical values in TB2 and TB20. Bi2O3 incorporation also was demonstrated by X-ray photoelectron spectroscopy (XPS). Characterization of mixed oxides suggests a homogeneous distribution of Bi2O3 on TiO2 surface. Photocatalytic tests were carried out using a catalyst loading of 1 g L-1 under simulated solar light and visible light. The incorporation of Bi2O3 in TiO2 improved the photocatalytic properties of the synthesized materials obtaining better results with TB20 than the unmodified TiO2 under both radiation sources.

Phosphorous-doped TiO2 nanoparticles: synthesis, characterization, and visible photocatalytic evaluation on sulfamethazine degradation.

Mesoporous phosphorous-doped TiO2 (TP) with different wt% of P (0.5, 1.0, and 1.5) was synthetized by microwave-assisted sol-gel method. The obtained materials were characterized by XRD with cell parameters refinement approach, Raman, BET-specific surface area analysis, SEM, ICP-OES, UV-Vis with diffuse reflectance, photoluminescence, FTIR, and XPS. The photocatalytic activity under visible light was evaluated on the degradation of sulfamethazine (SMTZ) at pH 8. The characterization of the phosphorous materials (TP) showed that incorporation of P in the lattice of TiO2 stabilizes the anatase crystalline phase, even increasing the annealing temperature. The mesoporous P-doped materials showed higher surface area and lower average crystallite size, band gap, and particle size; besides, more intense bands attributed to O-H bond were observed by FTIR analysis compared with bare TiO2. The P was substitutionally incorporated in the TiO2 lattice network as P5+ replacing Ti4+ to form Ti-O-P bonds and additionally present as PO43- on the TiO2 surface. All these characteristics explain the observed superior photocatalytic activity on degradation (100%) and mineralization (32%) of SMTZ under visible radiation by TP catalysts, especially for P-doped TiO2 1.0 wt% calcined at 450 °C (TP1.0-450). Ammonium, nitrate, and sulfate ions released during the photocatalytic degradation were quantified by ion chromatography; the nitrogen and sulfur mass balance evidenced the partial mineralization of this recalcitrant molecule.

Synthesis of Cr3+-doped TiO2 nanoparticles: characterization and evaluation of their visible photocatalytic performance and stability.

Cr3+-doped TiO2 nanoparticles (Ti-Cr) were synthesized by microwave-assisted sol-gel method. The Ti-Cr catalyst was characterized by X-ray diffraction, ultraviolet-visible diffuse reflectance spectroscopy, N2 adsorption-desorption analysis, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy (XPS) and zetametry. The anatase mesoporous Ti-Cr material exhibited a specific surface area of 54.5 m2/g. XPS analysis confirmed the proper substitution of Ti4+ cations by Cr3+ cations in the TiO2 matrix. The particle size was of average size of 17 nm for the undoped TiO2 but only 9.5 nm for Ti-Cr. The Cr atoms promoted the formation of hydroxyl radicals and modified the surface adsorptive properties of TiO2 due to the increase in surface acidity of the material. The photocatalytic evaluation demonstrated that the Ti-Cr catalyst completely degraded (4-chloro-2-methylphenoxy) acetic acid under visible light irradiation, while undoped TiO2 and P25 allowed 45.7% and 31.1%, respectively. The rate of degradation remained 52% after three cycles of catalyst reuse. The higher visible light photocatalytic activity of Ti-Cr was attributed to the beneficial effect of Cr3+ ions on the TiO2 surface creating defects within the TiO2 crystal lattice, which can act as charge-trapping sites, reducing the electron-hole recombination process.

Automated on-line monitoring of the TiO2-based photocatalytic degradation of dimethyl phthalate and diethyl phthalate.

A fully automated on-line system for monitoring the TiO2-based photocatalytic degradation of dimethyl phthalate (DMP) and diethyl phthalate (DEP) using sequential injection analysis (SIA) coupled to liquid chromatography (LC) with UV detection was proposed. The effects of the type of catalyst (sol-gel, Degussa P25 and Hombikat), the amount of catalyst (0.5, 1.0 and 1.5 g L-1), and the solution pH (4, 7 and 10) were evaluated through a three-level fractional factorial design (FFD) to verify the influence of the factors on the response variable (degradation efficiency, %). As a result of FFD evaluation, the main factor that influences the process is the type of catalyst. Degradation percentages close to 100% under UV-vis radiation were reached using the two commercial TiO2 materials, which present mixed phases (anatase/rutile), Degussa P25 (82%/18%) and Hombikat (76%/24%). 60% degradation was obtained using the laboratory-made pure anatase crystalline TiO2 phase. The pH and amount of catalyst showed minimum significant effect on the degradation efficiencies of DMP and DEP. Greater degradation efficiency was achieved using Degussa P25 at pH 10 with 1.5 g L-1 catalyst dosage. Under these conditions, complete degradation and 92% mineralization were achieved after 300 min of reaction. Additionally, a drastic decrease in the concentration of BOD5 and COD was observed, which results in significant enhancement of their biodegradability obtaining a BOD5/COD index of 0.66 after the photocatalytic treatment. The main intermediate products found were dimethyl 4-hydroxyphthalate, 4-hydroxy-diethyl phthalate, phthalic acid and phthalic anhydride indicating that the photocatalytic degradation pathway involved the hydrolysis reaction of the aliphatic chain and hydroxylation of the aromatic ring, obtaining products with lower toxicity than the initial molecules.

Optimization of solid-phase extraction of parabens and benzophenones in water samples using a combination of Plakett-Burman and Box-Behnken designs.

An automated method for the analysis of methylparaben, propylparaben, benzophenone-3, and benzophenone-4 in water effluents via on-line solid-phase extraction coupled with high-performance liquid chromatography/ultraviolet detection was proposed. The preconcentration parameters were studied using Plackett-Burman and Box-Behnken experimental designs using a C18 sorbent material. The results demonstrated that the eluent volume, composition, and sorbent amount were statistically significant. Optimal conditions for these variables were an eluent volume of 1.55 mL, eluent composition of acetonitrile 100% v/v, and sorbent amount of 100 mg. The eluted sample was analyzed on-line using high-performance liquid chromatography equipped with a reversed-phase C18 column and ultraviolet detection. Separation of the analytes was achieved in 15 min using gradient elution with acetonitrile/water. A simple, sensitive, and rapid analytical method was proposed for personal care compounds without sophisticated or expensive equipment. The limits of detection were 1.20, 1.73, 2.51, and 4.67 µg/L for propylparaben, methylparaben, benzophenone-3, and benzophenone-4, respectively. The analysis time was 48 min, consuming only 1.59 mL of eluent acetonitrile for the solid phase extraction step, with minimal sample handling. The method was applied to the analysis of spiked swimming pool and wastewater, with recoveries between 65-107%. These results indicate the reliability of the flow-based procedure.

Nanoparticle@Metal-Organic Frameworks as a Template for Hierarchical Porous Carbon Sponges.

The preparation of hierarchical porous carbon sponges (HCS) from metal oxide nanoparticle@metal-organic frameworks is reported. ZnO nanoparticles are partially converted to zeolitic imidazolate framework-8 (ZIF-8) crystals in presence of n-butylamine to obtain ZnO@ZIF-8 porous hybrids. After direct carbonization, followed by ZnO acidic etching, ZnO@ZIF-8 crystals were converted to submicrometric HCS. Due to the high surface area and accessible porosity, combining micro- and mesoporosity of HCS, their application for the extraction of water pollutants was studied by preparing HCS/polymer membranes, and showed a high efficiency for the fast (650 L m-2 h-1 ) removal of plastic degradation by-products (DBP, dibutyl phthalate. DEHP, bis(2-n-ethylhexyl)phthalate). DBP and DEHP breakthroughs were lower than 3 % after the filtration of 100 mL of water containing simultaneously both phthalates at a high concentration level (300 µg L-1 , each). HCS/polymer membranes were reusable up to 5 times, maintaining their extraction capacity, with relative errors of 6 % for DBP, and <1 % for DEHP.

Determination of phthalates in bottled water by automated on-line solid phase extraction coupled to liquid chromatography with uv detection.

An on-line solid phase extraction coupled to liquid chromatography with UV detection (SPE/LC-UV) method was automated by the multisyringe flow-injection analysis (MSFIA) system for the determination of three phthalic acid esters (PAEs). The PAEs determined in drinking water stored in polyethylene terephthalate (PET) bottles of ten commercial brands were dimethyl phthalate (DMP), diethyl phthalate (DEP) and dibutyl phthalate (DBP). C18-bonded silica membrane was used for isolation and enrichment of the PAEs in water samples. The calibration range of the SPE/LC-UV method was 2.5-100µgL-1 for DMP and DEP and 10-100µgL-1 for DBP with correlation coefficients (r) ranging from 0.9970 to 0.9975. Limits of detection (LODs) were between 0.7 and 2.4µgL-1. Inter-day reproducibility performed at two concentration levels (10 and 100µgL-1) expressed as relative standard deviation (%RSD) were found in the range of 0.9-4.0%. The solvent volume was reduced to 18mL with a total analysis time of 48min per sample. The major species detected in bottled water samples was DBP reaching concentrations between 20.5 and 82.8µgL-1. The recovery percentages for the three analytes in drinking water were 80-115%. The migration test showed a great variation in the sum of migrated PAEs level (10.2-50.6µgL-1) among the PET bottle brands analyzed indicating that the presence of these contaminants in the plastic containers may depend on raw materials and the conditions used during their production process.

An evaluation of the bioaccessibility of arsenic in corn and rice samples based on cloud point extraction and hydride generation coupled to atomic fluorescence spectrometry.

A simple, inexpensive and rapid method was proposed for the determination of bioaccessible arsenic in corn and rice samples using an in vitro bioaccessibility assay. The method was based on the preconcentration of arsenic by cloud point extraction (CPE) using o,o-diethyldithiophosphate (DDTP) complex, which was generated from an in vitro extract using polyethylene glycol tert-octylphenyl ether (Triton X-114) as a surfactant prior to its detection by atomic fluorescence spectrometry with a hydride generation system (HG-AFS). The CPE method was optimized by a multivariate approach (two-level full factorial and Doehlert designs). A photo-oxidation step of the organic species prior to HG-AFS detection was included for the accurate quantification of the total As. The limit of detection was 1.34µgkg(-1) and 1.90µgkg(-1) for rice and corn samples, respectively. The accuracy of the method was confirmed by analyzing certified reference material ERM BC-211 (rice powder). The corn and rice samples that were analyzed showed a high bioaccessible arsenic content (72-88% and 54-96%, respectively), indicating a potential human health risk.

Salicylic acid degradation by advanced oxidation processes. Coupling of solar photoelectro-Fenton and solar heterogeneous photocatalysis.

A 3.0 L solar flow plant with a Pt/air-diffusion (anode/cathode) cell, a solar photoreactor and a photocatalytic photoreactor filled with TiO2-coated glass spheres has been utilized to couple solar photoelectro-Fenton (SPEF) and solar heterogeneous photocatalysis (SPC) for treating a 165mgL(-1) salicylic acid solution of pH 3.0. Organics were destroyed by OH radicals formed on the TiO2 photocatalyst and at the Pt anode during water oxidation and in the bulk from Fenton's reaction between added Fe(2+) and cathodically generated H2O2, along with the photolytic action of sunlight. Poor salicylic acid removal and mineralization were attained using SPC, anodic oxidation with electrogenerated H2O2 (AO-H2O2) and coupled AO-H2O2-SPC. The electro-Fenton process accelerated the substrate decay, but with low mineralization by the formation of byproducts that are hardly destroyed by OH. The mineralization was strongly increased by SPEF due to the photolysis of products by sunlight, being enhanced by coupled SPEF-SPC due to the additional oxidation by OH at the TiO2 surface. The effect of current density on the performance of both processes was examined. The most potent SPEF-SPC process at 150mAcm(-2) yielded 87% mineralization and 13% current efficiency after consuming 6.0AhL(-1). Maleic, fumaric and oxalic acids detected as final carboxylic acids were completely removed by SPEF and SPEF-SPC.